Content |
LD Systems Stinger MIX 6 A G2 Active 2-Way Loudspeaker with Integrated Mixer
With a built-in mixer, the compact, lightweight Stinger MIX 6 AG2 active loudspeaker is the perfect choice for small-scale PA and personal monitoring applications. It features a 6.5" woofer and 1" HF transducer with an 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering amazing sound with clarity and punch.
The integrated mixer provides a stereo line and 3 microphone channels with high and low EQ, switchable hi-Z input and phantom power plus 24-bit digital effects. It allows for connecting a wide variety of sources including MP3 and CD players, iPods, instruments and condenser mics. The output section includes a 3-band master EQ for overall tone shaping and feedback control, 4-segment LED metering, RCA recording outputs and an adjustable monitor out. The Stinger MIX 6 A G2 incorporates a Class D amplifier with 2 x 280 watts peak power and 6.3 mm TRS output to power its optional passive companion Stinger MIX 6 G2.
Dual bottom and side stand mount inserts permit both vertical and horizontal setup, the latter putting the mixer controls right at your fingertips. On its own or in tandem with the passive unit, the Stinger MIX 6 A G2 provides awesome performance and versatility in an easily portable package.
A transport bag, a slave speaker and a speaker stand are available optionally.
- Type: active
- Woofer Size: 6.5“
- Woofer Size: 165.1 mm
- Woofer Brand: custom made
- Tweeter Size: 1“
- Tweeter Size: 25 mm
- Tweeter Brand: custom made
- Dispersion Angle (H x V): 80° x 70°
- Frequency Response: 80 Hz - 20,000 Hz
- Amplifier: class D
- Amplifier Power (RMS): 2 x 70 W
- Amplifier Power (Peak): 2 x 280 W
- Max SPL: 122 dB
- Protection: limiter, short circuit, over voltage, overload, temperature
Mixer
- Channels: 4
- Microphone Input Channels: 3
- Connector Type Microphone Inputs: XLR/ 6.3 mm jack (combo)
- Controls for Microphone Input Channels: EQ High, EQ Low, DFX Send, Level, Hi-Z Switch (channel 1 only)
- Input Impedance Microphone Input Channels: (unbalanced) 14 kOhms
- Input Sensitivity Microphone Input Channels: 70 mV
- Line Input Channels: 1
- Connector Type Line Input Channels: 3.5 mm stereo jack, 2 x RCA
- Controls Line Input Channels: EQ High, EQ Low, DFX Send, Level
- Input Impedance Line Input Channels: (unbalanced) 4.4 kOhms
- Input Sensitivity Line Input Channels: - 5 dBu
- Hi-Z Inputs: 1
- Hi-Z Input Connectors: 6.3 mm jack
- Input Impedance Hi-Z Input Connectors: 100 kOhm
- Monitor Line Outputs: 1
- Connector Type Monitor Line Output: 6.3 mm jack (balanced)
- Controls for Monitor Line Output: Monitor Volume
- Max Output Level Line Output Monitor: 28 dBu
- Record Output: 1
- Connector Type Record Output: 2 x RCA
- Max Output Level Record Output: 20 dBV
- Reinforced Main Output: 1
- Connector Type Reinforced Main Output: 6.3 mm (min. 4 Ohm impedance)
- Increased power main output (at 4 ohm): max 70 W / 140 W
DSP Digital Effects Unit
- DSP Number of Programs: 16
- DSP Controls: Presets, DFX return, Mute switch
- DSP Display Elements: Peak LED
Main Section
- Main Section Controls: EQ Low, EQ Mid, EQ High, Main Level, Phantom Power, switch operating voltage, power switch
- Phantom Power: 15 V
- Main Section Indicators: 4 segment LED level meter, power LED
- Power Socket: IEC power socket
- Power Supply: transformer
- Operating Voltage: 110 V AC - 120 V AC, 50 - 60 Hz / 220 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption (max.): 180 W
Cabinet
- Cabinet Type: bass reflex
- Cabinet Material: MDF
- Cabinet Surface: textured coating
- Cabinet Colour: black
- Width: 323 mm
- Height: 214 mm
- Depth: 222 mm
- Other Features: 2 x 16 mm pole mount socket, rubber feet
|
Evox 8 is a portable compact size sound reinforcement system. Evox 8 combines the quality and reliability of RCF transducers with a very high amplification power. The system features eight 2.0” full range transducers in the line source satellite and a deep sounding 12” woofer in a bass reflex enclosure. The system is designed to be the perfect high output solution for live music and DJs. The unique vocal attitude and SPL make Evox 8 the perfect tool for larger presentations, corporate events and congresses.
General Specs
1400 Watt 128 dB max SPL 40 Hz 20 kHz frequency response 12" Woofer, 2.5" v.c. 8 x 2" Ultra compact fullrange, 1.0 v.c. 120° x 30° slightly tilted pattern control Innovative DSP processing Pole mountable, easy set-up and transportation
Sound Specs
Frequency Response -3 dB: 40 Hz ÷ 20 Hz Max SPL: 128 dB Horizontal coverage angle: 120° Vertical coverage angle: 30° Fullrange: 8 x 2“, 1.0" v.c. Woofer: 12“, 2.5" v.c.
Inputs/Outputs
Input connectors: Jack-XLR male Output connectors: XLR female Input sensitivity: -2 dBu / + 4 dBu
Processor Section
Crossover frequencies: 220 Hz Protections: thermal, rms Limiter: Soft limiter Controls: Volume, EQ, phase, xover
Amplifier Specifications
Total power: 1400 W PEAK High frequencies: 400 W PEAK Low frequencies: 1000 W PEAK Total power: 700 W RMS High frequencies: 200 W RMS Low frequencies: 500 W RMS Cooling: Convection Connections: VDE connector
Cabinet Specs
Cabinet Material: Baltic birch plywood Hardware: 2 x M6 Handles: 1 top Pole Mount/Cap: Yes Colour: black
Size/Weight
Height: 530/20.86 mm/inch Width: 346/13.62 mm/inch Depth: 459/18.10 mm/inch Net Weight: 23.8/50.70 kg/lbs |
General Specs
- 128 dB Max SPL
- 1400 Watt 2-way peak power
- 8 IN Digital Mixer with multiple FX, Amp Simulator and Remote Control
- DSP Processing with FiRPHASE
- 12" woofer, high power 2.5" voice coil
- 8 x 2" ultra compact fullrange 1.0" voice coil
- 2350x350x450 mm 92.5x13.77x17.71 in (HxWxD)
- 24,4/53.8 kg/lbs
Acoustical Specs
FREQUENCY RESPONSE:40 Hz ÷ 20000 Hz HORIZONTAL COVERAGE ANGLE:120° MAX SPL @ 1M:128 dB VERTICAL COVERAGE ANGLE:30°
Inputs/Outputs
INPUT CONNECTORS:XRL, Jack
INPUT SENSITIVITY:-2 dBu/+4 dBu
INPUT SIGNAL:bal/unbal
OUTPUT CONNECTORS:XLR
Processor Section
CONTROLS:Volume, Boost, Mic/Line CROSSOVER FREQUENCIES:220 Hz LIMITER:Soft Limiter PROTECTIONS:Thermal, RMS
Cabinet Specs
CABINET/CASE MATERIAL:PP Composite
HANDLES:1 Top
GRILLE:Steel
COLOR:Black
Size/Weight
HEIGHT:623 mm / 24.53 inches
WIDTH:400 mm / 15.75 inches
DEPTH:460 mm / 18.11 inches
WEIGHT:23.8 kg / 52.47 lbs
|
- Lightweight Class-D amplifier produces 267-watt audio output.
- 1.5 " titanium compression driver & 10 " woofer.
- Industryʼs only master level control enables volume be wirelessly controlled by an optional ACT-32HR transmitter microphone instead of a separate remote.
- Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level.
- Up to 4 optional diversity receiver modules with 16 auto-scannable frequencies
- One-touch Scan & ACT sync button for fast and easy channel set-up.
- Built-in Bluetooth music player for wireless audio streaming.
- Retractable handle and sturdy wheels for easy transport.
- Built-in storage compartment for 2 HH or BP transmitters.
- A voice priority feature that mutes the music when wireless microphone is used.
- Built-in AC switching power supply for universal usage and fast battery charge.
- A smart 4-segment battery meter for accurate battery reading and charging status.
- Industryʼs only MTM-92 transmitter option for interlinking multiple MA-808 portables wirelessly to extend transmission range & expand coverage.
- Optional lithium rechargeable battey pack for direct replacement of existing battery. Lithium battery offers superior cycle life, half the weight and environmental.
- Speakon extension speaker output (use with MA-808EXP).
- 3 power modes: AC, rechargeable battery and DC jack.
- Suitable for tripod, floor or desk mount.
| Max. Power Output | 267W: 190W (woofer)|77W (tweeter) | | | Amplifier | Class D & Class AB | | | Sensitivity | Typical: 96 dB ︱ Maximum: 111 dB | | | T.H.D. | | | | Frequency Response | 50 Hz~18 kHz | | | Speaker | Tweeter: 1.5 " Compression Driver
Woofer: 10 " Neodymium | | | Coverage | H 60° × V 50° | | | Audio Inputs | Wired: XLR × 1 & 6.3 mm (1/4 ") × 1
Wireless: Up to 4 wireless microphones
Audio Player: CDM-2A︱CDM-2︱CDM-2B︱CDM-3A︱DPM-3
Line-In: Unbalanced RCA jack | | | Bluetooth Connectivity | Yes | | | Audio Output | Unbalanced Line RCA jack | | | Extension Speaker | Speakon output | | | Master Volume Control | Manually or Wirelessly via ACT-32HR | | | Controls | Tone, Voice priority & Echo on wireless mics | | | Storage | 2 handheld or bodypack transmitters | | | Installation | Speaker stand, flat surface or retractable handle & wheels | | | Power Supply | AC: Built-in 100~240V AC switching power supply (Max. Power Consumption: 352W)
DC & Battery: 24~32 DC, 12V/4.5AH rechargeable gel cell battery or optional MB-80×2 | | | Charge Time | Up to 8 hours (automatic charging management) | | | Standby Time | Up to 6 hours | | | Battery Indicator | 4-level indicator (25/50/75/100%) | | | Color | Black | | | Dimensions (W × H × D) | 360 × 560 × 350 mm (14.2 × 22 × 13.8 ") | | | Weight (battery included) | Approx. 20.5 kg (45 lbs) | | | Wireless System | | | Receiver | MRM-70B︱MRM-72B | | | Max. Receiver | Up to 4 (MRM-70B×2 + MRM-72B×1) | | | Transmitter | ACT-32H / ACT-32HR / ACT-32HC Handheld︱ACT-32T / ACT-32TC Bodypack | | | Microphone | MM-107 Wired Dynamic Microphone | | | Interlinking Transmitter | MTM-92 | | | Installation | Plug-in Module | | | Antenna | Built-in | | | Digital Audio Player | | | Model | CDM-2A︱CDM-2︱CDM-2B︱CDM-3A︱DPM-3 | | | Installation | Plug-in Module | | | Patents & Approvals | Patented. Telecom & safety regulations approved. | | | Notes | Refer to actual product in the event of product description discrepancy. Frequency range and maximum deviation comply with the regulations of different countries. |
|
The XP308i from Samson is a compact and portable PA system that includes two 2-way speakers and an 8-channel mixer. Designed with mobility in mind, all of the system components connect together into a single case for terrific portability.
Each of the speakers features an 8" woofer and a 1" titanium tweeter, housed inside a durable vented enclosure. The removable 8-channel mixer features a powerful and efficient 300W Class-D amplifier for powerful sound reproduction. It offers 4 mic/line inputs capable of delivering phantom power, as well as 2 stereo inputs. An integrated iPod dock lets you easily drop in an iPod for playing back pre-recorded material. Dual 3.5mm outputs provide convenient monitoring via headphones or additional speakers. RCA outputs let you connect additional speakers or a recorder.
Other useful features of the XP308i include separate bass and treble controls for each input, a music/speech switch for setting system EQ, and an internal effects processor, which can add digital reverb to any mic channel. A 6-segment LED meter with a limit indicator makes it easy to monitor levels at a glance.
Compact and portable design
Pair of 2-way speakers, each with an 8" woofer and 1" titanium tweeter
Powerful and efficient 300W Class-D amplifier
Removable 8-channel mixer with 4 mic/line inputs and 2 stereo inputs
Phantom power available for powering condenser microphones
Integrated iPod dock accommodates most iPod models
RCA and 3.5mm outputs make it easy to connect additional speakers, a recorder, or headphones
Individual bass and treble controls on each input
Music/speech switch for setting system EQ
Internal effects processor for adding reverb to mic channels
LED level meter with limit indicator
| YAMAHA Stagepas 600 BT Portable PA System
680-watt, portable PA system with 10-channel powered mixer, two 10" speakers, a Bluetooth® input, SPX digital reverbs, an onboard feedback suppressor and versatile EQ.
680-watt, portable PA system with 10-channel powered mixer, two 10" speakers, a Bluetooth® input, SPX digital reverbs, an onboard feedback suppressor and versatile EQ.
Specifications:
- 680W (340W + 340W) power output
- High quality speakers (LF:10" woofer/ HF:1.4" voice coil compression driver)
- Detachable 10-channel mixer (4 mono/line + 6 mono / 3 stereo line)
- Bluetooth® audio streaming
- 1-Knob Master EQ™ with virtual bass boost
- High resolution SPX digital reverbs (4 types, parameter control)
- Onboard feedback suppressor
- Great-sounding 3-band channel EQ
- Switchable stereo/ mono inputs
- Hi-Z (high impedance) inputs
- Phantom power
- Monitor and Subwoofer outputs
- Optional reverb footswitch
(Speakers): |
x 2 |
Τype: |
2 passive speakers |
Woofer: |
10" (25 cm) cone |
Cone: |
1.4" (3.56 cm) voice coil compression driver |
Enclosure: |
Two-way bass-relfex speakers |
Frequency Range: |
55 Hz - 20 kHz |
Dimensions: |
Speaker 33,5 x 54,5 x 31,9 cm. |
Weight: |
2 x Speakers 10.9 kg |
Type: |
Powered mixer |
Power: |
680W (340 W + 340 W) (Dynamic), 560W (280W + 280W) (Continuous) |
Inputs/Outputs: |
4 mono mic / line + 4 mono / 2 stereo line - Speakers Out(L, R), Monitor Out(L/MONO, R), Subwoofer Out (MONO) with auto HPF |
Channels: |
Mixing channels 10 |
Equalizer: |
HIGH Shelving: 8 kHz/LOW Shelving: 100 Hz/MID peaking: 2.5 kHz |
Effects: |
SPX digital reverb (4 program, parameter control) |
Phantom Power: |
+30V (CH1, 2) |
Dimensions: |
Mixer 34,8 x 19,7 x 13,5 cm. |
Weight: |
3.8 kg |
|
Reviews
There are no reviews yet.