Content | LD Systems Stinger MON81AG2
The LD Stinger MON81AG2 is an especially compact active monitor with broad frequency response and a maximum sound-level pressure of 116dB for versatile use on stage.
The 8" coaxial speaker with an integral 1" HF driver attains a dispersion angle of 75°x75°, which is beneficial in multifaceted applications as a stage monitor. The coaxial configuration results in a very homogenous sound in the entire dispersion area plus very low susceptibility to feedback. The active monitor is driven by a Class AB power amplifier with an output power of 80W RMS; short-circuit protection and a limiter ensure dependable operation.
The signal is connected and looped through using an XLR/ jack combo socket and the XLR output. The rear connector panel is rounded out by a volume control, LED indicators, and the IEC power socket
The elegant bass-reflex housing made of 15mm multiplex is finished with a durable coating and has ergonomically milled handles and a metal grille to protect the speaker. The monitor angle is 35°.
Type: active
Woofer size: 8“
Woofer size: 203 mm
Woofer type: coaxial speaker
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2
Woofer voice coil: 50.8 mm
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: custom made
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Amplifier: Class A / B
Dispersion angle (H x V): 75° x 75°
Power output (RMS): 80 W
Power output (peak): 160 W
Frequency response: 90 Hz - 20 kHz
Crossover frequency: 2.400 Hz
SPL (1 W/1 m): 97 dB
Max. SPL (continuous): 111 dB
Max. SPL (peak): 116 dB
Protection: limiter, short-circuit
Controls: Volume, On / Off
Indicators: Power, Limit
Number of line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Number of line outputs: 1
Line output connectors: XLR
Power supply: transformer
Operating voltage: 230 V AC / 50-60 Hz
Cabinet material: 15 mm plywood
Cabinet type: bass reflex
Monitor angle: 35°
Width: 320 mm
Depth: 250 mm
Height: 361 mm
Features: Ergonomic insert handles |
The HD 10-A, with an exceptional full range, is the optimum choice for live sound and installed situations. Thanks to its deep bass punch, clean midrange output and accurate high frequencies, it offers the ultimate intelligibility in vocal and recorded music, from live sound to playback and from monitoring to fixed installation applications.
APPLICATIONS
- • Live Sound
- • Rental
- • Portable PA
- • Stage Monitoring
- • Clubs
General Specs
1200 WATT PEAK, 600 WATT RMS Digital Bi-amp DSP Sound Processing RCF Precision Transducers SPL max. 129 dB
Acoustical Specs
Frequency Response -3 dB:50 Hz ÷ 20000 Hz Max SPL:129 dB Horizontal coverage angle:90° Vertical coverage angle:60° Compression Driver:1“, 1.7" voice coil Woofer:10“, 2.5" voice coil
Inputs/Outputs
Input signal:bal/unbal Input connectors:Jack-XLR male Output connectors:XLR female Input sensitivity:-2 dBu / + 4 dBu
Processor Section
Crossover frequencies:1700 Hz Protections:thermal, RMS Limiter:Fast limiter Controls:Volume, EQ shape, Mic/line
Amplifier Specifications
Total power:1200 W PEAK High frequencies:300 W PEAK Low frequencies:900 W PEAK Total power:600 W RMS High frequencies:150 W RMS Low frequencies:450 W RMS Connections:VDE AC socket
Cabinet Specs
Cabinet Material:Composite PP Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom Handles:1 top, 1 side Pole Mount/Cap:Yes Grille:Steel Colour:Black
Size/Weight
Height:527/20.74 mm/inch Width:303/11.92 mm/inch Depth:302.5/11.90 mm/inch Net Weight:13.9/30.64 kg/lbs |
The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.
APPLICATIONS
- • Main vocal stage monitor
- • Drum or keyboard monitor
- • Main PA in small venues
General Specs
- 800 Watt Peak, 400 Watt RMS digital bi-amplification
- 127 dB max spl
- 60° x 60° constant directivity horn
- 10" High power neodymium woofer, 2.5" voice coil
- 7 kapton dome, 1" exit, neodymium high frequency driver
- DSP processing, floor - fre field equalization, soft limiter and protection
- Combo xlr/jack input, xlr signal output
Acoustical Specs
- Frequency Response -3 dB:60Hz ÷ 20000 Hz
- Max SPL:127dB
- Horizontal coverage angle:60°
- Vertical coverage angle:60°
- Compression Driver:7 kapton dome, 1" exit, neodymium
- Woofer:10" neo high power woofer, 2.5" voice coil
Processor Section
- Limiter:Soft Limiter
- Controls:Freefield, floor
Amplifier Specifications
- Total power:800W PEAK
- High frequencies:200 W PEAK
- Low frequencies:600 W PEAK
- Total power:400W RMS
- High frequencies:100 W RMS
- Low frequencies:300 W RMS
Cabinet Specs
- Cabinet Material:Baltic Birch
- Handles:1 on side
- Pole Mount/Cap:yes
- Grille:steel
Size/Weight
- Height:324/12.7mm/inch
- Width:450/17.7mm/inch
- Depth:417/16.4mm/inch
- Net Weight:14,5/31.96kg/lbs
|
The NX M15-A is a high-efficiency, high output, two-way, wide dispersion active sound reinforcement system.
It benefits from the integration of 750 Watt Digipro digital amplifier power, control electronics and premium transducers components such as the 15” neodymium woofer with 3.5” high power voice coil.
The NX M15-A is the perfect balance between size and performance and it is smaller and lighter without compromising on performance.
Features |
---|
750 Watt Digipro digital amplifier | 131 dB max spl | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | 15" woofer, high power neodymium 3.5" voice coil | 1" HF driver, titanium dome, neodymium 1.75" voice coil | PFC power factor correction |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | Max SPL: | 132 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Compression Driver: | 1" neo, 1.75" v.c. | | Woofer: | 15" neo, 3.5" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | bal / unbal | | Input connectors: | Combo xlr-jack | | Output connectors: | xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1700 Hz | | Protections: | Thermal, rms | | Limiter: | Soft peak limiter | | Controls: | Volume, side / floor, contour | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 750 Watts | | High frequencies: | 250 Watts | | Low frequencies: | 500 Watts | | Cooling: | Convection / forced | | Connections: | Powercon in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Hardware: | 6 x fly tracks | | Handles: | 2 side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 736 / 28.97 mm/inch | | Width: | 430 / 16.92 mm/inch | | Depth: | 395 / 15.55 mm/inch | | Net Weight: | 23.8 / 52.46 Kg/Lbs |
|
12” active coaxial monitor
350W class D+ 65W class AB
FR: 60Hz-20kHz
Max SPL: 121dB
Input level: LINE -6dBu
12” coaxial woofer with 1” driver
Protection: Thermal/Convection fan/Overload/limiter/compression
The INVoTONE DSX series is a brand new cabinet line in the premium segment. The speakers are characterized by their accurate and balanced sound. Even very high sound pressure levels are reached. The speakers are comparable in every respect with high-priced branded products, just not in the price! In addition to the acoustic and technical qualities, this series is also mechanically equipped with all the professional features that are common in this segment. "- Monitor and Coaxial 12" subwoofers up to 2x15 "2-way floorstanding speaker and a 18" subwoofer Currently, our product range includes compact 12 arrived.
Power
| 350Watt RMS Biamp | Frequency range (-10dB) | 60Hz-20kHz | Maximum SPL @ 1m | 121dB | Radiation (HxV) | 70 ° x 70 ° | Components | 12 "woofer, 1" HT-driver coaxial system | Connectors | INPUT jack combo / OUTPUT XLR male balanced link. | Input Level | Line -6dBu | Control switches | Volume Control, Ground Lift, monitor / FOH preset switchable ON / OFF | Protection circuits | temperature controlled fan, limiter, compressor | Housing | MDF with durable black textured lacquer, metal front grille, rubber feet, wooden handles, Hochständeflansch | Dimensions | (HxWxD) 313mm x 393mm x 513mm | Weight | 14KG |
|
LD Systems Stinger MON121AG2 The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications. The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz. Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting. The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function. The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°. - Type: active
- Woofer size: 12“
- Woofer size: 304 mm
- Woofer type: coaxial speaker
- Woofer magnet: ferrite
- Woofer brand: custom made
- Woofer voice coil: 2
- Woofer voice coil: 50.8 mm
- HF driver size: 1“
- HF driver size: 25.4 mm
- HF driver magnet: ferrite
- HF driver brand: custom made
- HF driver voice coil: 1“
- HF driver voice coil: 25.4 mm
- Amplifier: Class A / B
- Dispersion angle (H x V): 75° x 75°
- Power output (RMS): 250 W
- Power output (peak): 500 W
- Frequency response: 80 Hz - 20 kHz
- Crossover frequency: 2200 Hz
- SPL (1 W/1 m): 100 dB
- Max. SPL (continuous): 116 dB
- Max. SPL (peak): 124 dB
- Protection: limiter, short-circuit
- Controls: Volume, On / Off
- Indicators: Power, Signal, Limit
- Number of line inputs: 1
- Line input connectors: XLR/ 6.3 mm jack (combo)
- Number of line outputs: 1
- Line output connectors: XLR
- Power supply: transformer
- Operating voltage: 230 V AC / 50-60 Hz
- Cabinet material: 15 mm plywood
- Cabinet type: bass reflex
- Monitor angle: 35°
- Width: 440 mm
- Depth: 360 mm
- Height: 514 mm
- Features: Ergonomic insert handles
|
Reviews
There are no reviews yet.