LD Systems PRO Series – 10″ active PA Speaker The LD Systems LDP102A is an active bass reflex multifunctional loudspeaker equipped with a 10″ speaker and a 1″ compression driver. This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section […]
The LD Systems LDP102A is an active bass reflex multifunctional loudspeaker equipped with a 10″ speaker and a 1″ compression driver.
This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 800 W Peak and a sound pressure level of 115 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
The LD Systems LDP102A is an active bass reflex multifunctional loudspeaker equipped with a 10" speaker and a 1" compression driver.
This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 800 W Peak and a sound pressure level of 115 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
This remarkably versatile 10“/1" enclosure can serve as a satellite, a fullrange cabinet, and a low-profile wedge monitor. The Music/Speech knob adjusts its finely balanced and therefore feedback-resistant frequency response to suit the given application. All this and an onboard power amp make the PR:O 10 XA a very flexible sound reinforcement tool indeed.
Features
Application: Fullrange Cabinet / Stage monitor / Satellit
Output Power: 600 Watt
Speaker Output for Extension Cabinet
Mic and Line Input
Versatile High-class Tool
Title PREMIUM PR:O
Product Class Active Systems
Model PR:O 10 XA
Frequency response +/- 3 dB 89 Hz - 19 kHz
Frequency response -10 dB 67 Hz - 19 kHz
Maximum SPL, @ 10% THD 121 dB
Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced
LF Speaker 10"
HF Driver 1"
Horn characteristics 90° x 60° CD horn
Equalizer Tone control
Subsonic filter 35 Hz
Peak limiter yes
RMS-Soundlimiter yes
HF protection (passive) Dyn. protection circuit
Amplifier 600 W class D - 4 ohms
Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 1, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 32 cm x 48 cm x 29 cm
Weight 13,9 kg / 30.6 lbs.
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
Speaker stand socket, one aluminium handle
45° monitor taper
Code:
40640
Configuration:
2 way
Built-in amplifier LF/HF:
700/200 W RMS
Built-in amplifier peak LF/HF:
1400/400 W
Frequency response:
58Hz - 20KHz -6dB
Low Frequency woofer:
10 - 2 coil inch
High Frequency driver:
1 - 1.4 coil inch
Maximum SPL cont/peak:
124/131 dB
Dispersion:
80° x 50° rotatable HxV
Input impedance:
22 Kohm
AC Power requirements:
640 VA
Input connector:
XLR with loop, RCA ST
Power cord:
5/16.4 m/ft
Net Dimension (WxHxD):
329x575x325 / 12.95x22.63x12.79 mm/inch
Net Weight:
15.6/34.39 Kg/lb
Transport Dimension (WxHxD):
420x675x400 / 16.53x26.57x15.74 mm/inch
Transport Weight:
18.1/39.90 Kg/lb
Active 2-Way Speaker with Bluetooth Connection
Equipped with: 15" Woofer and 1" compression driver
Frequency range [-10 dB]: 48 - 18,000 Hz
Max SPL: 125 dB
Dispersion pattern: 90° x 60°
Class D (LF) + Class AB (HF)
Power Peak (LF + HF): 400W
Signal input: 1x Combo (XLR / Jack), Mic / Line, 1x XLR / TRS
Signal output: 1x XLR Male (LINK / MIX)
3 Handles - two at the side, one at the top
36 mm Pole mount
Dimensions (W x H x D): 430 x 722 x 402 mm
Weight: 19.3 kg
Colour: Black
Includes softcover
Class D biamp amplifier (LF 175 W, HF 75 W)
2-way bass-reflex enclosure with 25 cm woofer and 3.5 cm driver
1 mic/line input (XLR/jack) with level control
1 line input (XLR/RCA) with level control
Master control with 2-band EQ
Control via Bluetooth
Black metal grille with acoustic foam
3 Rugged carrying handles
Application possibility: Standing; monitoring; on tripod
XKB-210A
Price-performance champion:
You have high demands regarding your speaker, but a small budget? Then Omnitronic offers you exactly the right thing with the XKB-210 A: the equipment and sound of the active speaker can keep up with significantly more expensive systems. It is ideal for events with live bands and DJs.
Equipment
Powerful bass, clear mids and trebles determine its sound. Further active speakers can be connected to the XKB-210 A via its XLR output. An integrated Bluetooth player, a Biamp amplifier and a 2-band EQ complete the package.
Thought-out design
Thanks to the carrying handles integrated into the design, you can carry the box comfortably with one hand. You can also use the box as a floor monitor: This works just as well as mounting it on a tripod or on a wall.
Power supply:
230 V AC, 50 Hz
Power connection:
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Output: line via 1 x 3-pin XLR
Input: line via 1 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line via 1 x stereo RCA
Input: line via 1 x 3-pin XLR
Input channels:
1 x mono via XLR or RCA or bluetooth, channel control via Rotary dial
1 x mono with Mic-line switch via Combination socket (XLR/jack), channel control via Rotary dial
Equalizer:
Master: 1 x 2-band tone control
Speaker:
1 x woofer (10") approx. 25 cm with ferrit magnet
Voice coil lows (1.5") approx. 4 cm
Voice coil compression tweeter highs (1.35") approx. 3.5 cm
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.