LD Systems PRO Series – 10″ active PA Speaker The LD Systems LDP102A is an active bass reflex multifunctional loudspeaker equipped with a 10″ speaker and a 1″ compression driver. This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section […]
The LD Systems LDP102A is an active bass reflex multifunctional loudspeaker equipped with a 10″ speaker and a 1″ compression driver.
This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 800 W Peak and a sound pressure level of 115 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
Standalone mono or stereo applications with LD MIX 10 G3
Subwoofer and monitor outputs
Rigid plywood enclosure
Dual-Tilt pole mount for 0° or 5° orientation
Content
LD Systems PRO Series - 10" active PA Speaker
The LD Systems LDP102A is an active bass reflex multifunctional loudspeaker equipped with a 10" speaker and a 1" compression driver.
This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 800 W Peak and a sound pressure level of 115 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
The Avante Audio A10 Achromic Series is a 10“, two-way active loudspeaker with a 1000W peak dynamic amplifier and an integrated DSP for a variety of applications including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more. The Class-D amplifier delivers 250W (RMS) to the woofer, while the Class-AB amplifier drives 50W (RMS) to the high-frequency compression driver, which combine to provide a frequency range of 70 Hz to 20 kHz with a peak SPL of 121 dB.
The integrated DSP offers four modes: Normal, Club, Live, and Speech, allowing you to custom tailor the speaker to your specific application. Additionally, there is a two-band EQ to further enhance the sound. The H-PP molded enclosure features a steel grille and a dual position pole mount with 0 or 7.5° options. The rear panel offers a balanced combo XLR-1/4" input, two RCA inputs, and a balanced XLR output for connecting additional speakers. There are independent gain controls for the XLR and RCA inputs. The Avante A10 Achromic Series loudspeaker ships with a power cord.
Amp Power: 1000W dynamic
LF: Class-D 250W (RMS)
HF: Class-AB 50W (RMS)
Built-in digital signal processing (DSP) with LCD screen, EQ, and Presets
1000 W Dynamic, 250 W Class-D (LF) + 50 W Class-AB (HF) RMS
DSP
DSP Features: LCD screen with EQ and multiple presets
Drivers
10.0" / 254.0 mm woofer with 2.0" / 50.8 mm voice coil 1.0" / 25.4 mm HF compression driver
Input and Output Connectors
Input: Balanced female combo XLR-1/4" / 6.35 mm jack Input: 2 x RCA (phono) Output: Balanced male XLR
Enclosure
H-PP molded
Grille Material
0.05" / 1.20 mm steel
Handles
1 x top
Flypoints
2 top, 1 back
Pole Mount
Dual Position: 0 and 7.5°
Power Input
115 VAC, 60 Hz
Power Consumption
400 W
Dimensions (H x W x D)
20.9 x 12.2 x 11.8" / 530.9 x 309.9 x 299.7 mm
Weight
25.0 lb / 11.3 kg
This remarkably versatile 10“/1" enclosure can serve as a satellite, a fullrange cabinet, and a low-profile wedge monitor. The Music/Speech knob adjusts its finely balanced and therefore feedback-resistant frequency response to suit the given application. All this and an onboard power amp make the PR:O 10 XA a very flexible sound reinforcement tool indeed.
Features
Application: Fullrange Cabinet / Stage monitor / Satellit
Output Power: 600 Watt
Speaker Output for Extension Cabinet
Mic and Line Input
Versatile High-class Tool
Title PREMIUM PR:O
Product Class Active Systems
Model PR:O 10 XA
Frequency response +/- 3 dB 89 Hz - 19 kHz
Frequency response -10 dB 67 Hz - 19 kHz
Maximum SPL, @ 10% THD 121 dB
Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced
LF Speaker 10"
HF Driver 1"
Horn characteristics 90° x 60° CD horn
Equalizer Tone control
Subsonic filter 35 Hz
Peak limiter yes
RMS-Soundlimiter yes
HF protection (passive) Dyn. protection circuit
Amplifier 600 W class D - 4 ohms
Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 1, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 32 cm x 48 cm x 29 cm
Weight 13,9 kg / 30.6 lbs.
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
10-inch LF SMX woofer
1.25-inch HF titanium compression driver
2000 W Class-D power amplifier with integrated FIR-Drive DSP
134 dB peak SPL
Frequency Range
65 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass.
Maximum SPL
134 peak dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
Power Consumption
100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A Current rating is 1/8 power.
Power Rating
2000 W
Frequency Response
85 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass.
Coverage (Nominal -6 dB) H
90 °
Coverage (Nominal -6 dB) V
60 °
LF Transducer
SMX2100 254 mm (10 in)
HF Transducer
DH3-B 1.25-in titanium compression driver
Crossover Frequency
1700 Hz
Connector Type
(2) XLR/TRS combo jack and (1) XLR link output
Enclosure Material
18-mm, 13-ply birch plywood with EVCoat
Grill
16AWG steel with powdercoat
Suspension
(8) M10 suspension points
Height
526 mm (20.71“)
Width
330 mm (12.99“)
Depth
365 mm (14.37“)
Weight Net
20.3 kg (44.75 lbs)
Shipping Weight
22.9 kg (50.49 lbs)
LD Systems MIX 10 A G3
Active 2-Way Loudspeaker with Integrated 7-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 10 A G3 integrates a 7-channel mixer and Class D amplification with 2 x 400 watts peak power. The compact bass reflex loudspeaker features a 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 90° x 60° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels with 2-band EQ, 48 V phantom power plus switchable hi-Z input (CH1) and stereo line channel. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering and XLR monitor and subwoofer outputs. In addition, the LD MIX 10 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A speakON output allows powering the passive LD MIX 10 G3 to easily create a stereo setup.
The rigid enclosure is constructed with tough plywood featuring a 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. On its own or in tandem with the passive unit, the LD MIX 10 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type
PA loudspeaker
Type
active
Woofer dimensions
10 "
Woofer size
254 mm
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Celestion
Dispersion (H x V)
80 x 70 °
Frequency response
65 - 20.000 Hz
Amplifier
Class D
Amplifier output (RMS)
2 x 200 W
Amplifier output (peak)
2 x 400 W
Max. SPL
124 dB
Protection circuits
limiter, over-current, overload, short circuit, thermal overload
SRM V-Class Series High-Performance Powered Loudspeakers
SRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.
The original SRM Series was a game-changer when it was introduced in 1999. And the series is setting out to make its mark once again. This required a deep look at what matters today in a portable loudspeaker. Power, sound quality, and reliability. We didn't hold back. We combined our most rock-solid amplifier platform ever, premium transducers, and the best acoustic tuning in the industry – the result is a new level of performance that cannot be beat at this price.
Best performance, sound quality, and reliability in its class
Industry-leading 2000W Class-D amplifier with transparent system limiting and protection
Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™
High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy
SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth®
Complete wireless control via the SRM Connect™ app
Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control
Dual-angle pole mount plus angled design for use as a floor monitor
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.