The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks. The bass-reflex design is loaded with a 6.5″ custom woofer and a 1″ silk dome tweeter with wave guide, which are […]
The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.
The bass-reflex design is loaded with a 6.5″ custom woofer and a 1″ silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W continuous power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz – 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.
Class D amplification with 2 x 280 watts peak power
6.5” custom woofer and 1” HF driver
Integrated 4-channel mixer
24-bit DSP with 16 FX Presets
Slave output for combination with LD MIX 6 G3 passive loudspeaker
Bass reflex enclosure for powerful, punchy bass
Dual 16 mm pole mounts for horizontal or vertical orientation
Content
The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.
The bass-reflex design is loaded with a 6.5" custom woofer and a 1" silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W continuous power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz - 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 6,5" Installation Monitor Active:
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
2x165mm (6.5”) LF woofer with 38mm (1.5”) voice coil, custom made for FBT
6 x M10 suspension points, wall bracket mount thread, 35mm (1 3/8”) top-hat
One integrated handle
12mm (0.47”) birch plywood scratch resistant enclosure and internal bracing
Code:
40639
Configuration:
2 way
Built-in amplifier LF/HF:
700/200 W RMS
Built-in amplifier peak LF/HF:
1400/400 W
Frequency response:
70Hz - 20KHz -6dB
Low Frequency woofer:
2x6.5 - 1.5 coil inch
High Frequency driver:
1 - 1.4 coil inch
Maximum SPL cont/peak:
124/131 dB
Dispersion:
70° x 50° rotatable HxV
Input impedance:
640 Kohm
AC Power requirements:
640 VA
Input connector:
XLR with loop, RCA ST
Power cord:
5/16.4 m/ft
Net Dimension (WxHxD):
190x560x260 / 7.48x22.04x10.23 mm/inch
Net Weight:
12.3/27.11 Kg/lb
Transport Dimension (WxHxD):
290x660x360 / 11.41x25.98x14.17 mm/inch
Transport Weight:
14.3/31.52 Kg/lb
SDQ5PIR is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.
The SDQ5PIR set can be controlled from the included infrared remote control, via serial commands or via the Apart wall control panels (ACP, ACPL or ACPR) which allow control of power and volume. ACPL and ACPR also allow the addition of external audio inputs. Teachers, lecturers or anyone who is giving a presentation can stop worrying about audio system problems and stay focused on their presentation.
LD Systems Roadman 102 HS Portable PA Speaker with Headset Microphone
The LD Systems Roadman 102 HS is a mobile and compact sound system with headset
The Roadman 102 HS is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit with headset and beltpack . A second wireless microphone unit are also available in option.
Product type
Battery-powered PA speaker
Type
Set with pocket transmitter and headset microphone
Low/mid driver dimensions
10 "
Woofer Size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
80 W
Peak power
320 W
Frequency response
70 - 16.000 Hz
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-link set (master / slave) , Audio-link slave volume , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Voice priority on / off , Volume Mic 1 , Volume Mic 2
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
3
Line input connectors
2 x RCA , Audio-link input XLR, female
Mic inputs
2
Mic inputs
6.3 mm Jack , XLR
Line outputs
3
Line output connectors
2 x RCA , Audio-link output XLR, male
Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched
Transmission frequency range
863.100 - 864.100 MHz
Speaker output connections
6.3 mm Jack
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Cabinet material
aluminium , plastic
Cabinet construction
vented
Width
355 mm
Height
610 mm
Depth
315 mm
Weight
19 kg
Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle
RoadMan 102 Slave Speaker Box to loop in until 20 units (incl. 24V DC rechargeable Battery and Power supply)
Product type
Battery-powered PA speaker accessories
Type
active, Follower loudspeaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Amplifier
Class D
System Power (RMS)
80 W
Peak power
320 W
Frequency response
70 - 16.000
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-Link Follower Volume, Power
Indicators
Charge/battery status
Line inputs
1
Line input connectors
Audio-link input XLR, female
Line outputs
1
Line output connectors
Audio-link output XLR, male
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC, 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Width
355 mm
Height
610 mm
Depth
315 mm
Other features
Stand mount 36 mm, Transport bag available optionally, transport handle, Trolley handle
Weight
18 kg
LD Systems MIX 6 A G3 Active 2-Way Loudspeaker with Integrated 4-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 6 A G3 integrates a 4-channel mixer and Class D amplification with 2 x 280 watts peak power. The compact bass reflex loudspeaker features a 6.5" custom woofer and 1" HF driver complement, 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels and a stereo line channel with 2-band EQ each plus switchable hi-Z input and 15 V phantom power. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering, an adjustable monitor and RCA recording outputs. In addition, the LD MIX 62 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A 4 ohm slave output allows powering the passive LD MIX 6 G3 for a dual speaker setup.
The rigid MDF enclosure features two 16 mm pole mounts for horizontal or vertical orientation. On its own or in tandem with the passive unit, the LD MIX 62 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type
PA loudspeaker
Type
active
Woofer dimensions
6.5 "
Woofer size
165.1 mm
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Dispersion (H x V)
80 x 70 °
Frequency response
80 - 20.000 Hz
Amplifier
Class D
Amplifier output (RMS)
2x70 W
Amplifier output (peak)
2x280 W
Max. SPL
122 dB
Protection circuits
ICL (Intelligent Clip Limiting), over-current, overload, short circuit, thermal overload
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Quick Start Guide
Reviews
There are no reviews yet.