Price | €10.41 €8.50 incl. GR VAT | €1,078.00 €949.00 incl. GR VAT | €279.14 €251.00 incl. GR VAT | €908.00 €799.00 incl. GR VAT | €113.00 €99.00 incl. GR VAT | €192.00 €169.00 incl. GR VAT |
Content | Specifications WS1000R
- Frequency Range: 790.850 MHz - 813.800 MHz
- Switching bandwith: 0.025 MHz
- No. of channels: 160 (10 groups of 16 CHN)
- Sensitivity: -94 dBm for 30 dB SINAD, typical
- Image Rejection: >60 dB
- S/N Ratio: >105 dB (A)
- T.H.D
- Audio Output Level XLR connector: -12 dBV
- 1/4inch connector: -18 dBv
- Audio Response: 60 Hz - 16 kHz
- Dynamic Range: >95 dB A-weighted
- Dimensions (W x H x D): 212 mm x 45 mm x 160 mm
- Power Requirements: 12-18 V dc at 400mA
|
Omni-directional antenna with integrated AB 3700 booster |
The IR-700D is a receiver distributor used in the TOA's infrared wireless microphone system. It employs 4 receiver mixing inputs and 2 distribution outputs. By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless receivers can be connected to the IR-702T.
Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | Power Consumption | 25 W or less | Input/Output | 4 mixing inputs, 2 distribution outputs | Band-Pass Frequency | 3.0 - 6.0 MHz | Gain | 0 dB (±3 dB) | Infrared Receiver Input | 75 Ω, BNC jack × 4 (Infrared wireless receiver's power source: 24 V DC,
800 mA max. in total of 4 terminals) | Distribution Output | 75 Ω, BNC jack | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Case: ABS resin, black | Dimensions | 210 (W) × 44 (H) × 200.9 (D) mm (8.27" × 1.73" × 7.91“) | Weight | 640 g (1.41 lb) (unit only) | Accessory | AC adapter* …1, AC Power cord (2 m (6.56 ft)) …1,
BNC plug-to-BNC plug cord (50 cm (1.64 ft)) …1, Rubber foot …4 | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-702T
together) |
| 732.2581 |
The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for the Sennheiser ASP 2 passive antenna splitter.
The ASP 2 also powers up to 4 x EM100 / 300 / 500 G2 radio mic receivers and 2 x AB 2 active mast head amplifiers 240 volt A.C. input. (UK 3 pin). The ASP 2 with NT1-UK combination helps reduce Antenna and PSU requirements in a multi receiver system.
Sennheiser NT1-UK Features:
- 12 volt D.C. regulated output, centre pin polarised positive
- 1.5 amp current rating
The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for Sennheiser ASP 2 passive antenna splitter.
|
Passive omni-directional antenna. Transmitting and
receiving antenna for frequencies between 450and 960 MHz. |
Reviews
There are no reviews yet.