| Content |
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
| Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power |
The Denon Professional DN-700R Network SD and USB Recorder is a 1U rack mountable recorder and audio playback device designed for installed sound applications such as houses of worship, education, and more. The unit can record to both SD/SDHC cards and USB media either one at a time for longer recording times or simultaneously to both mediums for backup. The unit features extensive DLNA/UPnp networking capabilities such as automatic or timed FTP file archiving of recorded audio with scheduled Network Timer Protocol, as well as full Web setup and control using IP. The built-in Web remote enables full control of the recorder using a mobile browser.
The front panel of the recorder features an OLED display for showing information such as time, sample rate, and file name. A set of rubberized buttons control basic functions such as record, stop, pause, play, forward, back, as well as menu control and file management functions such as move, copy, combine, divide, and undo. A shift button changes these buttons to functions such as dimming the display, marking files, record monitoring, switching to frame mode, and adjusting pitch. A rotary knob button controls recording level, recording balance, and navigates the menu settings. The front of the unit has two SD/SDHC card slots for inserting recording media with ejection buttons, as well as a USB female type A port for plugging in USB media such as thumb drives and external USB hard drives. A second USB female type A port allows you to plug in a USB QWERTY keyboard for entering file information while recording. The unit also includes a 1/4" headphone out and headphone level control knob for monitoring while recording or listening to recorded tracks.
For I/O, the back of the unit features left and right balanced analog 3-pin XLR female inputs, left and right unbalanced analog RCA inputs, a balanced digital 3-pin XLR AES/EBU input, an unbalanced digital coaxial SPDIF input, left and right balanced analog 3-pin XLR male outputs, left and right unbalanced analog RCA outputs, a balanced digital 3-pin XLR AES/EBU output, and an unbalanced coaxial SPDIF output. For remote control, the unit features both an RS-232C and a 25-pin parallel port. The included rack ears can be removed for tabletop operation.
Network Enabled Provides full setup and control of recorder over IP as well as automatic and timed FTP file archiving using Network Timer Protocol Product Manager Software Provides Web remote control from a network connected PC or Mac and allows you to control the recorder using a mobile browser including sequenced programming of multiple recorders and power on/off capabilities Recording Media Records to both SD and SDHC cards as well as USB media in either dual simultaneous mode for redundant backup or serially one followed by the other in relay/cascade mode for longer recording times Connections Features balanced XLR analog and AES/EBU digital I/O as well as unbalanced RCA analog and SPDIF digital I/O Remote Control Compatible with RS-232C, Parallel GPIO, and Denon's RC-400S "Hot Start" serial remote controller for installed applications Direct Control Features bright OLED display and large function buttons for changing recorder settings Front Panel USB Keyboard Input Features USB port for connecting to a USB keyboard and manually editing file name information while recording Timer Record and Playback Records and plays audio according to user-specified markers in time code DMP Mark Editor Software Includes Windows software for editing markers and marker labels placed within the audio file Switchable XLR/Line Combination Inputs Provides optional +48V of phantom power for condenser microphones and can be switched to line level operation
UPC: 883795002769
System
| Network SD/USB Recorder | | Compatible Media | SD/USB memory/USB HDD | | Playable File Formats | SD, USB: FAT16/FAT32/HFS+ | | Extension | WAV: WAV, AIFF, AIF
MP3: MP3
AAC: M4A with AAC-LC compression | | Resolution | WAV: 16-bit, 24-bit | | Bit Rate | MP3: 32 to 320 kbps and VBR
AAC: 64 to 320 kbps and VBR | | Sampling Frequency | WAV: 96, 48, 44.1 kHz
MP3: 48, 44.1 kHz
AAC: 48, 44.1 kHz | | Number of Channels | 2 (stereo), 1 (mono) | | Frequency Response | 20 to 20,000 Hz (+0.5 dB/ -1 dB) | | S/N Ratio | More than 89 dB (A-weighted) | | Total Harmonic Distortion | Less than 0.01% | | Dynamic Range | More than 106 dB (for 24 bit WAV playback) | | Channel Separation | Less than -90 dB | | Variable Pitch Width | -16% to 16% | | Variable Trim Adjustment Width | ± 2.0 dB |
| SPECIFICATIONS
[Recorder]
●Physical Tracks : 24 ●Simultaneous Recording Tracks : 8 ●Simultaneous Playback Tracks : 24 ●Recording Data Format : 44.1/48kHz, 16/24bit WAV ●Maximum Recordable Time : 200 minutes / GB (44.1kHz 16-bit, mono tracks) ●Projects : 1,000 ●Markers : 100 / Project ●Locator : Hours / Min. / Sec. / msec or Bars / Beats / Ticks ●File Editing : Divide, Trim ●Other Functions : Punch-In / Out (Manual, Automatic), Bounce, A-B Repeat, Undo / Redo, Metronome
[Audio interface]
●Input Channels : 8 ●Output Channels : 2 ●Quantization : 24bit ●Sampling Frequency : 44.1, 48, 88.2, 96kHz
[Mixer]
●Faders : 9 ●Level Meters : 4-Segment LED ●Track Parameters : 3-Band Equalizer, Pan (Balance), Effect Send x 2, Invert ●Stereo Links Track pairs : 1/2 to 23/24 selectable
[Effects]
●Algorithms : 9 (CLEAN, DISTORTION, ACO / BASS SIM, BASS, MIC, DUAL MIC, STEREO, 8 x COMP EQ, MASTERING) ●Types : 150 ●Modules : 7 for Insert, 2 for Send / Return ●Patches : 330 for Insert, 60 for Send / Return ●Tuner : Chromatic, Guitar, Bass, Open A/D/E/G, D modal
[Sampler]
●Playback Data Format: 44.1/48kHz, 16/24bit WAV ●Voices: 24 ●Editing Functions: Trim, Time-stretch
[Rhythm]
●Voices: 8 ●Sound Format: 16-bit Linear PCM ●Drum Kits : 10 ●Pads : 8 (velocity-sensitive) ●Precision : 48 PPQN ●Rhythm Patterns : 511/project ●Patterns : 511 (472 factory, 39 blank) / Project ●Beat : 1/4 - 8/4 ●Tempo : 40.0 - 250.0 BPM
[Hardware]
●Recording Media : SD Card (16MB-2GB), SDHC Card (4-32GB) ●A/D Conversion : 96kHz 24bit delta-sigma ADC ●D/A Conversion : 96kHz 24bit delta-sigma DAC ●Display : 128 x 64 pixel LCD (with backlight) ●Inputs : 8 x XLR-1/4''Phone Combo Jack / Input Impedance: (Balanced input) 1kΩ balanced, 2nd hot, (Unbalanced input) 50kΩ unbalanced, (Hi-Z Input) 470kΩ / Input Level: -50dBm to +4dBm continuously variable ●Built-in microphones : Omnidirectional condenser microphones Gain: -50dBm to +4dBm continuously variable ●Phantom Power Supply : 48V / 24V ●Master Output : 1/4“TRS Phone (balanced) / Output Impedance: 1kΩ / Rated Output Level: +4dBm ●Headphones Output : 1/4''Stereo Phone Jack, 20mW x 2 (at 32Ω load) ●USB : [B type (USB2.0 High-Speed compatible)] Audio Interface / Control Surface or Mass Storage Class operation [A type (USB2.0 High-Speed compatible)] USB Host capability ●Power Requirements : AC adaptor (DC5V/1A/center positive) or AA size (LR6) battery x6 ●Battery Life : 4.5 hours (with backlight on and phantom power off) ●Dimensions : 376(W) x 237.1(D) x 52.2(H) mm ●Weight : 1.3kg (without batteries)
*0dBm=0.775Vrms
R24 USB Audio Interface System Requirments
Windows® Windows® XP SP2 or later / Vista SP1 or later / 7
Intel® Pentium® 4 1.8GHz or better
1GB RAM or more
USB 2.0 compatible port
Intel® Mac OS X 10.4.11 or later / 10.5 / 10.6 / 10.7
Intel® Core Duo processor 1.83GHz or better
1GB RAM or more
USB 2.0 compatible port.
* USB hub is not supported.
* Intel® Chipset is recommended. | |
The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.
Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.
The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.
An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.
Main Features
Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder
Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences
Accepts sound pressure level up to 125 dB SPL
Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit
Allows recordings in CD quality (44.1kHz/16-bit)
Input level rotary control
Input level indicator (green/red)
Switchable limiter to avoid distorted recordings
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications
General
Microphone type Cardioid condenser (stereo)
Maximum input level 125 dB SPL
Input level adjustment range 0–40 dB
Frequency range 10 Hz – 20 kHz
Sampling frequency 44.1 kHz
Bit rate 16 bit
iOS device recharging port USB Mini-B connector
iOS device connector 30-pin dock connector
Device support iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation)
Power supply and other specifications
Power supply Provided through the iOS device connector
Power consumption 90 mW
Dimensions (W x H x D) 56 mm x 57 mm x 22 mm (including connector)
Weight 30 g
Operating temperature range 5–35 °C
Design and specifications subject to change without notice. |
Reviews
There are no reviews yet.