TASCAM DR-10SG Portable recorder with microphone

Features at a glance

• Supercardioid shotgun microphone
• Shoe adapter (ISO/JIS standard) attaches to a camera accessory shoe.
• Records to microSD or microSDHC cards.
• Records 44.1/ 48 kHz, 16/24-bit, mono or poly linear PCM (WAV/BWF)files.
• Built-in clock stamps BWF files with time-of-day information for additional convenience when editing or searching for files.
• Equalizer has four presets that can be selected to match the recording conditions.
• Limiter automatically reduces high input levels to suitable levels.
• Low cut filter reduces low-frequency noise (120Hz cutoff frequency).
• Dual recording for two files to be recorded simultaneously with different gain levels.
• Slate tone for conveniently synchronizing with video files.
• Camera out jack (combined with headphone jack)outputs audio to a camera.
• Automatic file closing prevents the loss of data before the battery runs out.
• Included noise isolation arm reduces lens operation noise.
• Included attenuation cable matches output audio signal level when connected to a camera.
• Included cable clip secures attenuation and headphone cables.
• Tripod threads (ISO/JIS standards for mounting directly to a camera tripod or rig.
• Playback to headphones to check recorded file contents immediately.
• Time track increment silently and seamlessly splits a recording by creating a new file at regular intervals (about 15 minutes)for easier editing.
• File naming based on a user-specified word or the current date.
• Operates on 1 AAA battery (alkaline, rechargeable NiMH or disposable lithium)or USB bus power.
• Secondary lithium-ion battery maintains date and time information.
• 3.5mm(1/8“)headphone jack built in.
• Easy to read 96×16 dot OEL display with wide viewing angle.
• Micro-B USB 2.0 port to easily transfer files to a computer.

Main Features

    * Colour TFT touch screen interface
    * 20 illuminated flash start keys

    * Up to 100 tracks available for flash start through touch screen
    * Transport and Online buttons recessed to prevent accidental operation
    * 100-mm fader with fader start capability and 0-dB lock
    * Monitor speaker and headphones output for monitoring
    * CAT6 connection to HS-2 and HS-8

Stereo Rack Memory Recorder
The UR-2 is a 1 U rack size stereo audio recorder using SD card and USB storage device that is flexibly adapting to the wide variety of playback requirements.
The UR-2 is a new generation stereo memory recorder from Fostex that uses 2 SD cards (SDHC compatible) and USB storage device as the recording media. The recording/ playback file format is BWF (WAV). Its ample playback functions will adapt to the wide variety of playback requirements. It offers high quality recording of up to 24bit/96kHz (in BWF format). Employing FAT 32 disc format, it is easy to process the file transfer to a PC based DAW.
The analog input and output are balanced XLR/+4dBu and un-balanced RCA/-10dBV, the digital input and output complies to AES/EBU and S/P DIF digital signal. It is flexible to be used in the available audio system. The playback function includes Chain Play and Timer Play, it is suitable for live stage performance and sound installation. In addition to the external control via parallel remote with D-Sub 25pin and RS-232C serial remote, a USB keyboard and 10-key keyboard can trigger the instant playback start, which is very useful at a live event, theater and broadcast environments.
The Mic input located on the front panel offers 48V phantom power, it can be used not only for recording but also for speech to be mixed with playback source. Last but not least, its newly employed organic EL display gives an extremely clear visibility. This combined with DC power operation, it serves for outdoor use very well.

MAIN FEATURES
• 2 sets SD card slots and a USB host connector for alternate recording/playback among the different media.
• Stereo or Mono WAV (BWF) recording to SD card (also SDHC) and USB storage device
• Fs: 44.1/48/88.2/96kHz, Quantization: 16/24bit
• High speed file transfer with PC via USB 2.0 (bi-directional)
• Employing FAT32 format, it allows to directly mount the recorded files to PC.
• It adapts to a wide variety of use environment by offering Chain Play and Memory Play.
• Timer Play and Power ON Play enable automatic playback start for such as chime and repetitive announcement, which are convenient in the installation audio industry.
• The play mode list employs CSV file format so that it is easy to edit by a text editor or spread sheet program software on PC.
• 99 Cue points with locate function. Waveform display under Scrub mode offers easy and visual Cue point setting
• Microphone input with P48V available on the front panel. Not only for recording but for speech to be mixed with playback source.
• Analog I/O with balanced XLR and un-balanced RCA pin jacks, Digital I/O with XLR connectors
• An organic EL display offers high visibility.
• Remote transport control via Foot SW, Parallel remote pot (Dsub 25pin) and RS-232C (D-sub 9pin)
• External USB keyboard can be used not only for file name editing but for transport control such as REC and PLAY.

The D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the D-2012C's 12 motorized faders and 8 rotary encoders can remotely adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor bus through headphones connected to a stereo headphone output. The D-2012C can be installed on a desk with the additional use of an optional D-2012AS Console Case.

The KORE 64™ ROM option represents a complete expansion and reimagining of the PC3 and PC3K's sonic potential (not for the PC3LE). Pushing the limits of V.A.S.T. synthesis for both realistic and experimental electronic sounds, KORE 64™ adds over 300 new programs, including stunning new Synths, Electric Guitars, Horns, Drums and Percussion. With KORE 64™ installed, the PC3/K built-in program library now totals over 1400 presets!

    New Setups:

        50 new setups featuring the KORE 64™ sounds.
        Over 200 new drum grooves in multiple styles.
        New Dance and Hip Hop setups for triggering and controlling beats in real time.

    New Synths:

        New samples modeled after the Oberheim SEM, ARP Chroma, TX802, CZ1, and dozens of legacy waveforms from the K series.
        Over 100 new synth programs.
        Sounds for popular electronic music styles like House, Trance, Dubstep, Drum&Bass, Glitch, Electro Hip Hop, and more.
        More real time controls, beat-synced modulations and envelope control transform sounds without hitting the edit button.
        Atmospheric and cycling pads voiced for performing, producing, and scoring.

    New Guitars:

        New samples modeled after the Gibson Les Paul and Fender Stratocaster.
        Palm muted and sustained articulations playable in a picked or legato style.
        Instant-shredder arpeggiator patterns, whammy bar effects, and realistic feedback emulations.
        Preset sounds from Rock, Country, Rock-a-Billy, Metal, Funk, and more.

    New Brass/Woodwinds:

        New alto sax, tenor sax, baritone sax, trumpet, and trombone samples.
        New programs include solo instruments and custom sections with many combinations of the different instruments.
        Articulate with pressure on several new programs.
        Sections cover styles from Big Band, Soul, Funk, Latin, R&B, Hip Hop, Rock and more.

    New Drums

        Drums from Yamaha, Ludwig, Pearl, DW, Rogers, and Gretsch recorded as full kits.
        Full cymbal arrays recorded with Zildjian, Paiste, and Sabian cymbals.
        72 new Drum Kits and 62 percussion instruments and templates.
        10 times the samples and 30 times the data of the existing PC3/PC3K Drums.
        All drum kits have mixer functioning on the sliders to change the level the kick, snare, toms, hats, and percussion independently.
        Unsurpassed realism and playability for sampled drums.
        Full complement of Electronic and Processed Drum samples.
        Scratches, hits and Industrial Sounds.
        Wide variety of traditional and processed Percussion sounds.

Download the full preset Objects List under the Downloads section

User Installable.

Requires:  PC3K OS v2.20 or better
                  PC3 OS v2.20 or better

All specifications subject to change without notice.

Designed for Windows based Pro Tools systems, the affordable Digidesign Pro Tools Custom Keyboard WIN let users work faster in their Pro Tools environment by providing direct access to primary transport and editing functions.

The Digidesign Pro Tools Custom Keyboard use the same symbols and color coding system built into the keyboards on the ICON D-Control worksurface and the other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards. The Digidesign Pro Tools Custom Keyboard provides plug-and-play USB connectivity and offers a fresh new look at a lower price than ever before. The keyboard also supports a PS-2 connection for maximum compatibility.

Digidesign Pro Tools Custom Keyboard WIN Features

• Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
• Windows - PS-2 connection cord and USB adapter for easy connection with either method