Crown 460 CSL Power Amplifier 2x205Wrms@8Ω Made in U.S.A. USED

270.00

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Power Amplifier Crown 460 CSL , 2x205Wrms @ 8Ω , Made in U.S.A.   Price does not include V.A.T.    

 

Read more

Power Amplifier Crown 460 CSL , 2x205Wrms @ 8Ω , Made in U.S.A.

 

Price does not include V.A.T.

 

 

Weight 8.00 kg

Reviews

There are no reviews yet.

Be the first to review “Crown 460 CSL Power Amplifier 2x205Wrms@8Ω Made in U.S.A. USED”

Your email address will not be published. Required fields are marked *

Quick Comparison

Crown 460 CSL Power Amplifier 2x205Wrms@8Ω Made in U.S.A. USED removeRAM AUDIO DQL 4.0 amplifier 2X1950 watt/2ohm -USED- removeBEYERDYNAMIC Blueprint A150 Power Amplifier 2 x 150W USED remove
NameCrown 460 CSL Power Amplifier 2x205Wrms@8Ω Made in U.S.A. USED removeRAM AUDIO DQL 4.0 amplifier 2X1950 watt/2ohm -USED- removeBEYERDYNAMIC Blueprint A150 Power Amplifier 2 x 150W USED remove
Image
SKUCrown460cslDQL4.0A150
Rating
Price270.00 1,227.59 incl. GR VAT299.00
Stock

Only 1 left in stock

Only 1 left in stock

Only 1 left in stock

AvailabilityOnly 1 left in stockOnly 1 left in stockOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Power Amplifier Crown 460 CSL , 2x205Wrms @ 8Ω , Made in U.S.A.

 

Price does not include V.A.T.

 

 

 

 Power amplifier RAM AUDIO DQL 4.0 2X1950 watt/2ohm second hand Good condition

 

 

 

The RAM® DQL Series Power Amps have been developped to meet the hig-hest goals in the field of professional power amplification. Their power, distor-tion and dynamics figures place them as reference in the industry.
The DQL Series incorporate unique Absolute Protection Systems as the CRO™, an immediate load disconnec-tion system with an exclusive design that excludes current in the output cir-cuit relay, or the ICL™ Clip-Limiter, CSP™

 

• Instantaneous High Flow QuantaPulse Power Supply.
• Oversized Motorola® Output transis-tors in the power modules.
• High Damping Factor.
• Unique Protection Systems: ICL™,CSP™, CRO™ ...
• Dual, Bridge or Parallel operation switch on rear panel.
• 2 U Rugged Steel Chassis.
• 10 mm thick, extruded and machined duraluminum front panel.
• Twin Neutrik® XLR Input Connectors.
• Dual Binding posts & Neutrik® Speakon Output Connectors.
• Unobtrusive Gripping Handles in the front panel.
• Slow Start System with circuit relay based speaker protection.
• Back to front twin cooling fans.
• Single independant fan on the power supply.
• Electronic continuously variable fan speed control.
• Usable voltage 170-245V (230V nomi-nal) or 90-128V (120V nominal).
• 2 Ohms continuous operation.

 

Technical Specifications
 DQL-4.0 
Output Power    
Continuous Average Power    
RMS, 1kHz, 1.0% THD+N    
@ 2Ω    2x 1950 W 
@ 4Ω    2x 1300 W 
@ 8Ω    2x750 W 
Bridge @ 4Ω    3900 W 
Bridge @ 8Ω    2600 W 
Pink Noise 12dB Crest Factor    
@ 2Ω    2x 2600 W 
@ 4Ω    2x 1580 W 
Frequency Response    
Power Bandwidth ±0.25dB     20Hz-20kHz 
Phase Response    
@ 1 watt  20Hz-20kHz     ±15 deg 
Total Harmonic Distortion    
20Hz-20kHz     65 V/µs 
Damping Factor    
20Hz-1kHz     >800 
Voltage Gain    33.1 dB 
Sensitivity    1.6 V 
Rated Power @ 4Ω    
Signal-to-Noise Ratio    105 dB 
No weighting     
Required AC Mains    
230 V - 50 Hz  (idle)     0.5A 
@ 4Ω (1/8 rated power)     7 A 
Dimensions    
W x H x D  (mm)     483x89x460 
W x H x D  (inches)     19x3.5x18.1 
Weight    
Shipping    14Kg-30.4Lbs 
Net    13Kg-28.3Lbs 

 

PRICE DOES NOT INCLUDE VAT

 

150W RMS into 8Ω (ohms)
1U slim fit rack mount design
High performance with incredibly low noise

Weight8.00 kg15.00 kg3.50 kg
DimensionsN/AN/AN/A
Additional information
Weight 8.00 kg
Weight 15.00 kg
Weight 3.50 kg