Content |
The TTL55-A is a high power, three way, active line array module engineered to deliver an incredible output for use in indoor or outdoor large spaces. The system is designed to be easily scalable from few modules for medium and small theatres to full size arrays for very large outdoor stadia and public spaces.
The three new designs for the six neodymium transducers that power the system represent the result of many years dedicated in pioneering new solutions using the best materials available on the market. The integration of the 3500 W four channel digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency.
Applications
- Touring sound reinforcement for large-sized venues
- High quality reinforcement of music and speech
- Stadiums, arenas, concert halls
Part Number
- 13000188 (230V)
- 13000189 (115V)
Features |
---|
Tour grade cabinet and mechanics | 3500 Watt, 4 way amplification | 6 x high power neodymium transducers | High quality analog input board | 96 kHz, 32 bit DSP processing | Remote monitoring and control | Maximum output per size on the market |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | Max SPL: | 143 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | max 7° | | Compression Driver: | 3x1.5" neo, 2.5" voice coil | | Midrange: | 10" neo, 3.5" voice coil | | Woofer: | 2x12" neo, 4" voice coil | |
INPUT/OUTPUT SECTION |
---|
Input connectors: | XLR, Ethercon | | Output connectors: | XLR, Ethercon | | Input sensitivity: | 4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 320 Hz/1300 Hz | | Protections: | thermal, excurs., rms | | Limiter: | soft limiter | | Controls: | DSP controlled | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 3500 Watts | | High frequencies: | 500 Watts | | Mid frequencies: | 1000 Watts | | Low frequencies: | 2x1000 Watts | | Cooling: | convection/forced | | Connections: | powercon | |
CABINET |
---|
Cabinet Material: | baltic birch plywood | | Hardware: | array fly-ware | | Handles: | 2 side | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 380/15 mm/inch | | Width: | 1020/40 mm/inch | | Depth: | 550/21.6 mm/inch | | Net Weight: | 67/147.7 Kg/Lbs | |
|
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive? Woofer.
Specifications:
Frequency Range
|
:
|
57 Hz - 20 kHz(-10 dB)
|
Frequency Response
|
:
|
75 Hz - 20 Hz (+/-3db)
|
Coverage Pattern
|
:
|
100 x 15 nominal
|
Crossover Modes
|
:
|
4 Ohms Bi-amp / passive,
externally switchable
|
Crossover Frequency
|
:
|
132 dB SPL peak 1.2 kHz
|
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
|
System Maximum SPL
|
:
|
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
|
System Sensitivity (1w @ 1m
|
:
|
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
|
LF Driver
|
:
|
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps
|
HF Driver
|
|
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
|
Nominal Impedance
|
:
|
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
|
Active Tunings
|
:
|
Tunings available at www.jblpro.com
|
Enclosure
|
:
|
18 mm, 11-ply birch plywood
|
Suspension / Mounting
|
:
|
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
|
Finish
|
:
|
Black DuraFlex? finish
|
Grille
|
:
|
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
|
Input Connectors
|
:
|
Neutrik? Speakon? NL-4 (x2)
|
Dimensions (H x W x D)
|
:
|
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
|
Net Weight
|
:
|
21.8 kg (48 lb)
|
Optional Accessories
|
:
|
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
|
|
TOA SR-A Series Mid-Size Line Arrays feature TOAʼs proprietary "Synch-Drive" horn technology (pat. pending) to provide a uniform, high frequency sound field offering excellent sound clarity and minimal interference. Mid-high modules include the SR-A12L (long-throw) and the SR-A12S (short-throw) each with dual compression drivers and 12" low frequency driver. The SR-A18 subwoofer module features a heavy duty 18" low frequency driver rated at 720 Watts continuous power handling. Along with weather resistant models and multiple mounting hardware options, the SR-A Series Line Arrays are backed with a five year product warranty. FEATURES: | - Designed for wide bandwidth response - These compact and powerful 2-way modular speaker units can be used in multiple configurations as required to deliver greater output power with a more extended frequency response.
- High-performance driver units - Each Type A Series speaker module contains a 30cm (12“) low frequency unit and a high-frequency horn attached to two compression drivers for greater output.
- Wavefront control - The horn incorporates a proprietary phase wavefront control throat that functions to obtain the best possible performance from the high frequency drivers.
- Adjustable sound coverage - Type A Series provides two speaker configurations designed for specific coverage characteristics, each having a different taper. The 5-degree taper is for effectively transmitting sound over distance while the 15-degree taper is optimized for excellent short range coverage.
- Simple maintenance - Maintenance and servicing are made easier on the Type A Series to suit it for permanent installations. All driver replacement is possible from the speaker's rear, a simple and speedy procedure.
- SR-A12L Long-throw enclosure (15°V x 90°H)
- SR-A12S Short-throw enclosure (5°V x 90°H)
- Components: Dual compression drivers. 12” low frequency driver. Power handling: 450 W (LF), 180 W (HF)
- SR-A18 Subwoofer (Sold Seperately) 18” low frequency Power handling: 720 W
- Five year warranty
| General Specs: | | Enclosure: | ....... | Bass Reflex Type | | Power Handling Capacity: | ....... | Continuous Program: Low 450W, High 180W | | Rated Impedance: | ....... | Low: 8 Ohms, High: 16 Ohms | | Sensitivity: | ....... | Low: 98dB, High: 110dB both at 1W/1M | | Frequency Response: | ....... | 50 Hz - 20kHz (When using DP-0206 Option) | | Crossover Frequency: | ....... | 1000Hz (When using DP-0206 Option) | | Directivity Angle: | ....... | Horizontal: 90 degrees Vertical: 5 degrees | | Speaker Component: | ....... | Low frequency: 30cm cone-type High frequency: Wave front control horn 90° (horizontal) × 5° (vertical) + compression driver × 2 | Input Connector: | ....... | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x 2 (usable connector: Neutrik NL4FC) | | Finish: | Enclosure: | ....... | Plywood black, paint | | Front Grill: | ....... | Punched steel plate, black, acrylic paint | Dimensions: | ....... | 740 (W) x 433 (H) x 467 (D) mm | | Weight: | ....... | 49kg including accessories | | Accessories: | ....... | Joint Plate x 2, Joint plate mounting bolt (M10) x 16 | | Option: | ....... | Rigging Frame: SR-RF12, Digital Processor: DP-0206 |
|
TOA HX-5 Array system
Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1
|
Ηχεiο 3 δρόμων, διενiσχυσης, line array μικρού μεγέθους με 2x8" 2168J LF, 1000W/8Ω, 97dB SPL/1W/1Μ, 4x4" 2104H MF, 2x1" 2407H ring radiators HF, MF/HF 225W/8Ω, 107dB SPL/1W/1M, 80Hz-18kHz ±3dB, 90° horizontal. Έτοιμο να δεχθεi το drive pack (μονάδα ενισχυτών με εσωτερικό processor). (279H x 787W x 406D mm). Βάρος 28 kg. |
A very compact, active, two-way line array loudspeaker module that delivers extraordinary power handling, clarity, flexibility and great sound in a compact, easy to handle and affordable package.
The 750 Watt Class-D Digipro amplifier module accurately matches the high quality analogue signal input board with precise, complex filter response that result in the natural, detailed reproduction of the best radiating designs.
The NX L23-A is the ideal choice when line array performance is needed and a fast and easy set up is a must.
Features |
---|
750 Watt Digipro digital amplifier | 133 dB max spl | 100 x 15, Wide dispersion constant directivity angle | 12" woofer, high power neodymium 3.5" voice coil | 3 x 1" HF driver, titanium dome, neodymium 1.75" voice coil | PFC power factor correction |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 60 Hz | ÷ 20 kHz | Max SPL: | 133 dB | | Horizontal coverage angle: | 100° | | Vertical coverage angle: | Max 15° | | Compression Driver: | 3 x 1" neo, 1.75" v.c. | | Woofer: | 12" neo, 3.5" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | bal / unbal | | Input connectors: | Combo xlr-jack | | Output connectors: | xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1300 Hz | | Protections: | Thermal, rms | | Limiter: | Soft peak limiter | | Controls: | Volume, hf correction cluster size | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 750 Watts | | High frequencies: | 250 Watts | | Low frequencies: | 500 Watts | | Cooling: | Convection / foced | | Connections: | Powercon in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Hardware: | Arry side fittings | | Handles: | 2 side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 346 / 13.62 mm/inch | | Width: | 659 / 25.94 mm/inch | | Depth: | 415 / 16.33 mm/inch | | Net Weight: | 28.5 / 62.83 Kg/Lbs |
|
Reviews
There are no reviews yet.