| Content |
The TTL55-A is a high power, three way, active line array module engineered to deliver an incredible output for use in indoor or outdoor large spaces. The system is designed to be easily scalable from few modules for medium and small theatres to full size arrays for very large outdoor stadia and public spaces.
The three new designs for the six neodymium transducers that power the system represent the result of many years dedicated in pioneering new solutions using the best materials available on the market. The integration of the 3500 W four channel digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency.
Applications
- Touring sound reinforcement for large-sized venues
- High quality reinforcement of music and speech
- Stadiums, arenas, concert halls
Part Number
- 13000188 (230V)
- 13000189 (115V)
| Features |
|---|
| Tour grade cabinet and mechanics | | 3500 Watt, 4 way amplification | | 6 x high power neodymium transducers | | High quality analog input board | | 96 kHz, 32 bit DSP processing | | Remote monitoring and control | | Maximum output per size on the market |
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | | Max SPL: | 143 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | max 7° | | | Compression Driver: | 3x1.5" neo, 2.5" voice coil | | | Midrange: | 10" neo, 3.5" voice coil | | | Woofer: | 2x12" neo, 4" voice coil | |
| INPUT/OUTPUT SECTION |
|---|
| Input connectors: | XLR, Ethercon | | | Output connectors: | XLR, Ethercon | | | Input sensitivity: | 4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 320 Hz/1300 Hz | | | Protections: | thermal, excurs., rms | | | Limiter: | soft limiter | | | Controls: | DSP controlled | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 3500 Watts | | | High frequencies: | 500 Watts | | | Mid frequencies: | 1000 Watts | | | Low frequencies: | 2x1000 Watts | | | Cooling: | convection/forced | | | Connections: | powercon | |
| CABINET |
|---|
| Cabinet Material: | baltic birch plywood | | | Hardware: | array fly-ware | | | Handles: | 2 side | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 380/15 mm/inch | | | Width: | 1020/40 mm/inch | | | Depth: | 550/21.6 mm/inch | | | Net Weight: | 67/147.7 Kg/Lbs | |
|
The SR-S4SWP is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | | Operating Temperature | -10℃ to +50℃ | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | | Dimensions | 160 (W) × 892 (H) × 303 (D) mm (excluding connected cable) | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
| Features : | | Specifications : |
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
| - JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
| - VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
| - Constant Curvature waveguide for unprecedented array coherence.
| - Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
| - Array Configuration Selector permist "array shading“.
| | |
| Power Rating | : | 1750 Watts Peak
875 Watts Continuous |
| | Frequency Range | : | 57 Hz - 20 kHz
(-10 dB) |
| Dimensions
(H x W x D) | : | 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in) |
| | Frequency Response | : | 75 Hz - 20 Hz
(+/-3db) |
| | Maximum Peak Output | : | 136 dB SPL at 1m |
| | Coverage Pattern | : | 100 x 15 nominal |
| | DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) | : | LF: 750 Watts, HF: 125 Watts |
| | DPC-2 Output Sectoin | : | LF: Dual-Bridged Technology™, Class D |
| | Autio Input Connector | : | XLR with loop through |
| | LF Driver | : | 1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
| | HF Driver | : | 3 x JBL 2408J, 38 mm (1.5 in) |
| | User Controls | : | Input Attenuator (0-16 dB) |
| | Signal Processings | : | DSP based, resident in Input Module |
| | AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60 Hz |
| | AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
| | AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
| | AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
| | Enclosure | : | 25/15 mm, 11-ply birch plywood |
| | Suspension / Mounting | : | Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
| | Finish | : | Black DuraFlex™ finish |
| | Grille | : | Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
| | Net Weight | : | 24 kg (52 lb) |
| | Optional Accessories | : | VRX-AF: Suspension array frame | | |
|
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive? Woofer.
Specifications:
|
Frequency Range
|
:
|
57 Hz - 20 kHz(-10 dB)
| |
Frequency Response
|
:
|
75 Hz - 20 Hz (+/-3db)
| |
Coverage Pattern
|
:
|
100 x 15 nominal
| |
Crossover Modes
|
:
|
4 Ohms Bi-amp / passive,
externally switchable
| |
Crossover Frequency
|
:
|
132 dB SPL peak 1.2 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
| |
System Maximum SPL
|
:
|
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
| |
System Sensitivity (1w @ 1m
|
:
|
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps
| |
HF Driver
|
|
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
| |
Nominal Impedance
|
:
|
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
18 mm, 11-ply birch plywood
| |
Suspension / Mounting
|
:
|
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
| |
Finish
|
:
|
Black DuraFlex? finish
| |
Grille
|
:
|
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
| |
Input Connectors
|
:
|
Neutrik? Speakon? NL-4 (x2)
| |
Dimensions (H x W x D)
|
:
|
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
| |
Net Weight
|
:
|
21.8 kg (48 lb)
| |
Optional Accessories
|
:
|
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
|
|
TOA SR-A Series Mid-Size Line Arrays feature TOAʼs proprietary "Synch-Drive" horn technology (pat. pending) to provide a uniform, high frequency sound field offering excellent sound clarity and minimal interference. Mid-high modules include the SR-A12L (long-throw) and the SR-A12S (short-throw) each with dual compression drivers and 12" low frequency driver. The SR-A18 subwoofer module features a heavy duty 18" low frequency driver rated at 720 Watts continuous power handling. Along with weather resistant models and multiple mounting hardware options, the SR-A Series Line Arrays are backed with a five year product warranty. | FEATURES: | - Designed for wide bandwidth response - These compact and powerful 2-way modular speaker units can be used in multiple configurations as required to deliver greater output power with a more extended frequency response.
- High-performance driver units - Each Type A Series speaker module contains a 30cm (12“) low frequency unit and a high-frequency horn attached to two compression drivers for greater output.
- Wavefront control - The horn incorporates a proprietary phase wavefront control throat that functions to obtain the best possible performance from the high frequency drivers.
- Adjustable sound coverage - Type A Series provides two speaker configurations designed for specific coverage characteristics, each having a different taper. The 5-degree taper is for effectively transmitting sound over distance while the 15-degree taper is optimized for excellent short range coverage.
- Simple maintenance - Maintenance and servicing are made easier on the Type A Series to suit it for permanent installations. All driver replacement is possible from the speaker's rear, a simple and speedy procedure.
- SR-A12L Long-throw enclosure (15°V x 90°H)
- SR-A12S Short-throw enclosure (5°V x 90°H)
- Components: Dual compression drivers. 12” low frequency driver. Power handling: 450 W (LF), 180 W (HF)
- SR-A18 Subwoofer (Sold Seperately) 18” low frequency Power handling: 720 W
- Five year warranty
| | General Specs: | | | Enclosure: | ....... | Bass Reflex Type | | | Power Handling Capacity: | ....... | Continuous Program: Low 450W, High 180W | | | Rated Impedance: | ....... | Low: 8 Ohms, High: 16 Ohms | | | Sensitivity: | ....... | Low: 98dB, High: 109dB both at 1W/1M | | | Frequency Response: | ....... | 50 Hz - 20kHz (When using DP-0206 Option) | | | Crossover Frequency: | ....... | 1000Hz (When using DP-0206 Option) | | | Directivity Angle: | ....... | Horizontal: 90 degrees
Vertical: 15 degrees | | | Speaker Component: | ....... | Low frequency: 30cm cone-type
High frequency: Wave front control horn 90° (horizontal) × 15° (vertical) + compression driver × 2 | | Input Connector: | ....... | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x 2 (usable connector: Neutrik NL4FC) | | | Finish: | Enclosure: | ....... | Plywood black, paint | | | Front Grill: | ....... | Punched steel plate, black, acrylic paint | | Dimensions: | ....... | 740 (W) x 433 (H) x 467 (D) mm | | | Weight: | ....... | 47kg including accessories | | | Accessories: | ....... | Joint Plate x 2, Joint plate mounting bolt (M10) x 16 | | | Option: | ....... | Rigging Frame: SR-RF12, Digital Processor: DP-0206 | |
|
The SR-C8S is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48)“
and Neutrik NL4MP × 2 | | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“) | | Weight | 16 kg (35.27 lb) | | Accessory | M8 connection bolt …4 | | Option | Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.