| Content |
The TXD-12M is a compact passive two-way wedge monitor enclosure designed for use in a wide variety of live sound, fixed installation and mobile DJ applications that require professional sound quality in an easily transportable format.
It consists of a 12" reflex-loaded low frequency driver and a 1" high frequency compression driver on a 40°H x 70°V dispersion HF horn in an optimally tuned enclosure. These high grade components are matched with an internal third order passive crossover network to ensure a seamless transition between the HF and LF drivers.
The crossover network incorporates a twostage thermal overload protection system which prevents damage to the high frequency driver, reacting instantly to large transient peaks while still allowing wide dynamic range to be maintained. Although the protection system is transparent at normal operating levels, as the level increases the signal is gradually and imperceptibly reduced once the critical threshold has been reached.
The cabinet is constructed from 15mm (5/8“) birch plywood, screwed and glued together for maximum rigidity. Its symmetrical shape allows the monitor to be inverted and used as left/right mirror image pairs.
In addition to its primary function as a floor monitor, the TXD-12M is also suitable for front-of-house applications and can be used with the integral pole mount socket on top of optional 35mm poles and loudspeaker stands. Two recessed flush handles are provided for easy lifting and carrying, and eight rubber feet are fitted. A grey powdercoated perforated steel mesh grille protects the drive units from damage.
A Neutrik Speakon NL4MP speaker connector is located at each end of the cabinet on recessed panels, providing input and parallel connections to additional TXD series monitors.
Full specifications
Net Weight 18kg (39.6lbs)
Dimensions 435mm x 553mm x 288mm (17.1" x 21.8" x 11.3“)
Components 1 x 12" (305mm) LF driver, 1 x 1" (25mm) HF compression driver
Frequency Response 65Hz - 20kHz ±4dB
Dispersion 40°H x 70°V @ -6dB points
Power Handling 300 watts r.m.s., 600 watts program
Recommended amplifier power 600 watts @ 8 ohms
Sensitivity 97dB, 1 watt @ 1 metre
Maximum SPL 122dB continuous, 128dB peak
Impedance 8 ohms
Crossover Internal passive network at 1.8kHz; 12dB/octave high-pass, 12dB/octave low-pass
Construction 15mm (5/8“) birch plywood enclosure. Finished in black semi-matt textured paint. Two recessed carrying handles. Integral pole mount socket
Grille Heavy duty powder coated perforated steel mesh
Connectors (2) Neutrik Speakon NL4MP, wired pin1+: positive, pin 1-: negative, pins 2+ and 2- N/C
Spares & Accessories LS-1219 12" (305mm) LF loudspeaker
RC-1219 Recone kit for LS-1219
CD-111 1" (25mm) HF compression driver
RD-111 Replacement diaphragm for CD-111
MG-121/X Metal grille
PX-121/X Passive crossover network
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
|
Frequency Range
|
:
|
60 Hz - 20 kHz
| |
Frequency Response
|
:
|
70 Hz - 20 kHz
| |
Coverage Pattern
|
:
|
50 x 90 nominal
| |
Crossover Modes
|
:
|
Passive / Bi-amp
| |
Crossover Frequency
|
:
|
1.1 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
| |
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
| |
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
| |
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
| |
Nominal Impedance
|
:
|
8 ohms
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
| |
Finish
|
:
|
Black DuraFlex finish
| |
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
| |
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
| |
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
| |
Net Weight
|
:
|
21 kg (46.0 lb)
|
|
Features : Specifications :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
Twelve M10 suspension points.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Frequency Range ( –10 dB) : 41 Hz-20 kHz
Frequency Response (± 3 dB) : 55 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 96 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 131 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)
Net Weight : 26 kg (58 lbs
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 126 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 10" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
118 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
126 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
72 - 18000 HZ
Frequency response (-10 dB)
58 - 20000 Hz
Crossover frequency
1700 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Features :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Specifications :
Frequency Range ( –10 dB) : 50 Hz-20 kHz
Frequency Response (± 3 dB) : 75 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 95 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 130 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm
(22.5" x 13.4" x 10.4“)
Net Weight : 19 kg ( 42 lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual
|
Reviews
There are no reviews yet.