WHARFEDALE EVP-X12 2-WAY 12ʼʼ SPEAKER 250W

The new generation of the highly successful EVP-S series, withimproved power handling and more features.

250W 8ohm 12" + 1" Full Range

• 1.7" Titanium diaphragm compression driver
• PRO-TECH HF Protection
• 2 way network in bass cabinets
• carpet finish with speakon / jack inputs
• LED Indicators for signal present and HF protection circuit

The Wharfedale Professional EVP-X series loudspeaker systems are the latest evolution of our highly successful EVP-S family. Built around the development of an exceptional new Elliptical Waveguide Horn coupled with a ferrofluid cooled 44mm titanium compression driver, the high frequency performance and system reliability of this series is unprecedented in this product class. High output capability and low distortion with excellent high frequency extension characterize these new drivers. When comparing sound quality and specifications to the competition, the advantages of Wharfedale Pro built and designed components, the real compression driver and our sophisticated crossover can immediately be heard and appreciated.

The New Elliptical Waveguide Horn:  In comparison to a conventional rectangular horn, the Elliptical Wave Guide offers superior control over HF coverage, with reduced distortion, greater output and smoother frequency response.  The elliptical shape means that there are no corners or parallel surfaces to distort, diffract or reflect the sound – therefore the output is smoother, cleaner and more consistent. Again, due to the elliptical shape, mid to high frequencies are diffused more efficiently. When coupled with a true compression driver, the result is brilliant, natural HF reproduction.

The Wharfedale Professional EVP-X series loudspeakers combine exceptional design and features with outstanding sound quality to provide a choice of sound systems to suit almost any application. 

System Protection:  The ProTech protection system in the EVP-X progressively converts excess power into heat and triggers a reduction in the power to the HF Driver. When the overload condition is removed, the system returns seamlessly to normal operation. 

Sophisticated Crossover Design:  Enhancing smooth frequency and power response, the EVP-X features a sophisticated crossover design that uses high voltage capacitors and inductors with massive cores and heavy gauge wire, enabling the crossover network to handle high power without saturating.

Built to last:  The EVP-X cabinets are constructed using high grade, low resonance composite wood and covered with a road tough industrial carpet.  A heavy duty full length steel grille protects the internal components from damage.

Versatility:  Full range cabinets in the EVP-X Series are trapezoidal in shape and therefore easily arrayable.  They also feature an alloy stand adaptor in the base of the unit for mounting on tripods or for use in combination with one of the complimentary sub bass systems. 

Ease of use:  The EVP-X have the added benefit of signal present and HF protect LED indicators on the front of the loudspeaker - green to show signal present and orange to show the HF bulb is active, making it easy to monitor the system levels.

Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black

This item is BLACK.

The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.

• 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications
• High output, 131dB SPL capacity
• Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
• 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
• Rugged, high-tech polypropylene enclosure
• 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B

Dual 12-inch two-way with 700 watts continuous, 2100 watts peak power handling. BIampable with 600 watts/4ohm LF and 75 watts 8ohm HF. DH7 3-inch voice coil titanium compression driver coupled with 75°x50° asymmetric CD horn aimed downward 10° . Weight: 35kg Measurements: 99x39x37,5cm

Active or Passive     Passive
Frequency Response     -10dB:48-20,000Hz
Power Capacity     600W
Maximum Sound Pressure Level (SPL)     131dB
Nominal Sensitivity     97dB
Impedance     8 ohms
Crossover     2KHz
Low Frequency Driver     DVX3121, 12" (305mm) Driver
High Frequency Driver     ND2, 1" (25.4mm) exit Neodymium
Enclosure Material     Polypropylene Structural Foam
Input Connections     Glandnut SJO cable
Mounting Options     Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure
Dimensions     24.14 x 15.64 x 14.26" (613 x 397 x 362mm)
Weight     43.7 lbs (19.8 kg)

Features

    * DVX3121 12" LF Transducer with forced air cooling
    * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
    * 90° x 50° Coverage Pattern
    * 600W Continuous (2400W peak) power handling
    * High sensitivity, 131 dB maximum SPL
    * Adjustable monitor angle (45° or 55°)
    * 2 Anchor plates for single stud fittings and 7integral suspension points
    * Available in black or white
    * Passive/biamp selectable
    * Full line of accessories

Specifications

    * Frequency Response (-3dB): 58Hz-15kHz
    * Frequency Range (-10dB): 48Hz-20kHz
    * Rec. Hipass Frequency: 50Hz
    * Axial Sensitivity: 97dB (1W/1m)
    * Max. Calculated SPL: 131 dB
    * Horizontal Coverage: 90°
    * Vertical Coverage: 50°
    * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
    * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
    * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
    * LF Transducer: DVX3121, 12" driver
    * HF Transducer: ND2, 1" exit Neodymium compressiondriver
    * Crossover Frequency: 2kHz
    * Nominal Impedance: 8 ohms
    * Minimum Impedance: 6.2 ohms
    * Connectors: (2) Neutrik Speakon NL4\'s
    * Enclosure Material: Polypropylene structural foam
    * Suspension: Enclosure has locations for 4 single-studattachment plates and 10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear of enclosure
    * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
    * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
    * Net Weight: 43.7 lbs
    * Shipping Weight: 48.6 lbs