Content |
2-way, 15ʼʼ, speaker system, 300watts continuours, 600watts program, 1200watts peak, 8ohm, 98dB, 45Hz-20KHz. System Type: 15” 2-way - Frequency Response: 45Hz-20kHz - Sensitivity 1w@1m/dB: 98 - Nominal Dispersion (H x V): 90º x 60º - Peak SPL (dB): 129 - System Impedance: 8 - Power Handling (watts): Continuous: 300, Music: 600, Peak: 1200 - LF Driver size (mm/ins): 380/15 - Coil size (mm/ins): 64.26/2.5” - Impedance (ohms): 8 - HF SECTION: Coil Size (mm/ins): 44/1.75”, Exit size (mm/ins): 25/1”, Diaphragm matl: Titanium, Impedance (): 8 - HF Horn shape/size: elliptical/1” - X-OVER SECTION: Type: 2- way full range, Low pass (Hz): 2.2kHz, HF driver protect type: Bulb, HF EQ (boost/flat): 3dB - IN/OUT PANEL: Connectors input: 2 x 1/4” / +2 speakon™” - Weight net (kg): 25.9kg
|
Ηχείο 3-Way Full-Range υψηλής ισχύος 1450W
κατασκευασμένο από πολύφυλλo ξύλο συμήδας
και επένδυση Duraflex. Απόκριση συχνοτήτων:
38 Hz - 20 kHz. Ευαισθησία: LF: 127dB-SPL cont
avg (133 dB peak) Tri-amp mode: MF: 133dBSPL
cont avg (139dB peak) HF: 135dB-SPL cont
avg (141dB peak) Bi-amp mode: MF/HF: 133dBSPL
cont avg (139dB peak) με woofer 15" 2265H
LF: 1000W (4000W peak), 2 hrs, 750 W (3000
W peak), 100 hrs JBL Differential Drive® διπλού
πηνίου 75mm (3-in). Driver μεσέων συχνοτή των
CMCD-82H 8" MF: 350 W (1400W peak), 2 hrs
με ενσωματωμένο περιστρεφόμενο κυματοδηγό
και 2432H driver υψηλών συχνοτήτων HF: 100
W (400 W peak), 2 hrs με στόμιο χοάνης 38mm
(1.5 in), πηνίο φωνής 75mm(3 in) και διασπορά
χοάνης. 60° x 40°. Δυνατοτητα διενίσχυσης/
τριενίσχυσης με διακόπτη. Διατίθεται και σε
λευκό χρώμα (-WH). Διαθέτει υποδοχές (13 x
M10) για eyebolts σε χρήση μόνιμων
εγκαταστάσεων (διατίθονται σαν option). Eπίσης
μπορεί να δεχτεί το Planar Array Frame kits PAF-
2K and PAF-3K για κρέμαση πολλαπλών ηχείων
(option). Χρήσεις: PA, θέατρα, Disco/Club,
Aμφιθέατρα, Αθλητικές Εγκαταστάσεις, θεματικά πάρκα κλπ.
Διαστάσεις ΥΠΒ 967 x 561 x 657 mm. Βάρος
45,8 κιλά.
|
Club Series V
Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon® and ¼" connectors. Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.
Yamaha has a long history of both making and reproducing music. The Club series V loudspeakers represent the latest in our continuing effort to provide the professional features and sound quality you've come to expect and deserve.
Built in the United States, these loudspeakers are designed to provide years of service. high power handling and excellent response have made Club Series loudspeakers the perfect choice for more than 16 years. Whether playing in a band, DJing, orupgrading the sound system at your church or school, with an expanded lineup of over twenty models to choose from, you're sure to find the right loudspeaker. Have a look at what goes into their construction -- Cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Another great benefit of this material is its environmental friendliness. Made from southern yellow pine, this material is both abundant and quickly renewable. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of one ten thousandth of an inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. Whether covered in durable carpet or the elastomeric spray coating, heavy steel handles and sturdy pole sockets make moving and positioning easy.
The drivers, or speakers in these cabinets, are custom made my Eminence Speaker Corporation® to Yamaha's exacting tolerances. Woofers share design features like high strength curvilinear cones and Dupont KaptonTM voice coil formers. Oxygen-free copper voice coils and oversize strontium ferrite magnets are also used to provide high power handling and long life. The 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex and help dissipate heat. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90° x 40° custom designed CD (constant directivity) horn with excellent dispersion and response.
Crossover networks that divide the signal going to the woofer and compression driver are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.
Connections on these loudspeakers are dual Neutrik Speakon® ¼ jacks for the highest possible strength and current capacity. Two of each connector makes it easy to "daisy chain," or add speakers.
Club V loudspeakers with the C prefix are coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to the carpeted S versions, they can easily fit any decor. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance.
C215V
Two 15" cast frame woofers
2000-watt peak power handling
90 x 45 degree CD horn
Perfect where high sound pressure levels are required
Features:
- Tough, paintable exterior coating
- Dual cast-frame 15" drivers
- Frequency response: (-10dB) 42Hz - 16kHz
- 1,000W program handling, 2,000W peak
- Sensitivity: 99dB
- 20“W x 46“H x 24“D
- 101 lbs.
| Woofer | Tweeter
(diaphragm) | Freq
Resp
(-10dB) | Power
Handling
(noise 1 /
program/peak) | Sen-
sitivity | Max.
SPL 3 | Dims.
(WxHxD) 2 | Wt. 2
(lbs) |
15" (2) | 2" titanium | 42Hz-
16kHz | 500/1000/2000 | 99dB | 132dB | 20x46x24 | 101.0 |
|
|
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver™ provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* PT™ Progressive Transition™ Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Tri-Amp Switchable
* Optional planar array frame kit PAF-2K for 3-wide array with ASB6128V subwoofer center. (See AE Series Array Guide).
* For fixed installation applications such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live nightclubs, dance-clubs/discotheques, sports facilities and themed entertainment venues.
Frequency Range : 38 Hz - 19 kHz (-10 dB)
Frequency Response : 45 Hz - 17 kHz ( ± 3 dB)
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 10
Directivity Index (DI) : 10 dB
Crossover Modes : Tri-amp / Bi-amp switchable
Passive Crossover Slopes : MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
Transducer Power Rating (AES) : LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs
Long-Term System Power Rating (IEC) : LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs
Maximum SPL : LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)
System Sensitivity of Passive Sections 6 : MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
|
The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18“) |
The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.
The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
Reviews
There are no reviews yet.