WHARFEDALE LX-12 2-WAY SPEAKER 300W

(4 or 8 ohm)
Two way, 12ʼʼ woofer and wave guide with 2ʼʼ(50mm)
titanium diaphragm driver, Trapezoid enclosure, (Cont.300W/Music
600W)
APPLICATIONS: 2 way - FREQUENCY RESPONSE @ +/- 3 Db: 50-
20kHz - SENSITIVITY 1w@1m (Db): 97 - COVERAGE Horiz: 90 - COVERAGE
vert.: 45° - POWER HANDLING (watts): continuous: 400, music:
800, peak: 1600 - MAX SPL(dB): 129 - SYSTEM IMPEDANCE: 4 or 8 -
LF DRIVER: driver size: 12° - H F SECTION: impedance(W): 8, coil size
(mm/ins): 50/2ʼʼ, exit size (mm/ins): 35/1.4ʼʼ, diaphragm mati: Titanium, protect
type: bulb - HF HORN: type: Elliptical - CROSSOVER SECTION:
crossover Frequency: 1.8k, system Fb: 50Hz - ENCLOSURE TYPE: finish
colour (LX): carpet black, construction material (LX): MDF/particle - RIGGING
HARDWARE: 12xM10 flying inserts (LX-12Eonly) STAND ADAPTOR: yes - HANDLE: type: square, quality: 2 - GRILLE:
thikness (mm): 1.5, type: full steel - INPUT CONNECTOR: speakon™ NL4
type: 2, paralle with input connector: yes, hi pass out connector: no - CASTOR:
no - PRODUCT DIMS. (mm): H: 630, W (front/rear): 396/269, D: 396
- WEIGHT (KG): net: 26.5, gross: 28.1

Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black

This item is BLACK.

The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.

• 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications
• High output, 131dB SPL capacity
• Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
• 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
• Rugged, high-tech polypropylene enclosure
• 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B

Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, μαύρο χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg.

With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.

Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1

Features

    * DVX3121 12" LF Transducer with forced air cooling
    * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
    * 90° x 50° Coverage Pattern
    * 600W Continuous (2400W peak) power handling
    * High sensitivity, 131 dB maximum SPL
    * Adjustable monitor angle (45° or 55°)
    * 2 Anchor plates for single stud fittings and 7integral suspension points
    * Available in black or white
    * Passive/biamp selectable
    * Full line of accessories

Specifications

    * Frequency Response (-3dB): 58Hz-15kHz
    * Frequency Range (-10dB): 48Hz-20kHz
    * Rec. Hipass Frequency: 50Hz
    * Axial Sensitivity: 97dB (1W/1m)
    * Max. Calculated SPL: 131 dB
    * Horizontal Coverage: 90°
    * Vertical Coverage: 50°
    * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
    * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
    * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
    * LF Transducer: DVX3121, 12" driver
    * HF Transducer: ND2, 1" exit Neodymium compressiondriver
    * Crossover Frequency: 2kHz
    * Nominal Impedance: 8 ohms
    * Minimum Impedance: 6.2 ohms
    * Connectors: (2) Neutrik Speakon NL4\'s
    * Enclosure Material: Polypropylene structural foam
    * Suspension: Enclosure has locations for 4 single-studattachment plates and 10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear of enclosure
    * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
    * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
    * Net Weight: 43.7 lbs
    * Shipping Weight: 48.6 lbs

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Order-# D113103 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 400 watts Program Power 800 watts Peak Power 1600 watts SPL 2,83 V/1m 99 dB max. SPL 1m (calc. with Peak) 131 dB Freq. Range (-10 dB) 60Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 12350 Order-# D366559 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 385x 715x 374 Net Weight 24 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam