Amplifier: The Titan™ 8 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and […]
Amplifier:
The Titan™ 8 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 8 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M6 threaded rigging points are provided for a variety of safe flying configurations with four of these inserts available, bottom-mounted, in an OmniMount® 30.0 bracket footprint.
The Titan™ 8 Active also features a switchable microhpone/line level input with adjustable gain, allowing a dynamic microphone to be used without a mixer for simple presentations.
SPECIFICATIONS
MODEL
TITAN 8 ACTIVE
GENERAL INFO
System type
Active 8″ 2-way Bi-Amplified
Frequency response +/- 3db
70Hz-20kHz
HF SECTION
Hf type
Titanium Compression Driver
Horn dispersion (H x V)
90° x 60°
Hf exit size mm / inches
30mm / 1.2“
PHYSICAL FEATURES
Enclosure Material
Injection Moulded Polypropylene
Enclosure Colour
Grey or White or Black
Size (mm/inches)
205mm / 8“
AMPLIFIER POWER
Power On Protection
Power switch on / off mute
Thermal Protection
Amplifier shutdown, auto reset
Low Line Voltage Shut Down
60% Nominal line voltage
Driver Protection
Independent LF and HF limiters
DC Protection
Yes
Short Protection
Yes
Dimensions (HxWxD)
mm
396mm x 266mm x 221mm
inches
15.59″ x 10.47″ x 8.7“
Impedance
4 Ω
Clip Limiter
Turns on approx 150W output
Limiter Indicator
Red LED
Power Indicator
Blue LED
AC Power details
Power Supply
High Efficiency Switching
Mode Power Supply
AC Power Options
AC100~120V / 220~240V, 50 / 60Hz
Power On Indicator
LED
Rigging / Bracket /
8 M6 threaded inserts including 4
Mounting Options
M6 threaded inserts on bottom in OmniMount 30.0-type footprint
Optional wall-mount bracket
Input A – type
Switchable balanced mic or line level input
Input Sensitivity
Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level
+22dBu
Input Connector
XLR – 1/ 4″ Combo jack
Input Impedance
Balanced: 20k ohms
Input B – type
Maximum Input Level
+22dBu
Input Connectors
Combo jack: 1/4″ – XLR
Bass Response Optimizer
Subsonic Filter
30Hz, Second-order filter
Amplifiers
Low-Frequency (Class D)
Rated 150W RMS, 300W Peak
High- Frequency (Class A/B)
Rated 30W RMS, 60W Peak
Electronic Crossover
24dB/octave Linkwitz-Riley
Crossover Frequency
2.4kHz
DIMENSIONS & WEIGHT
Net weight ( kg / lbs )
5.7kg / 12.54lbs
Gross weight ( kg / lbs )
7.70kg /16.94lbs
Weight
7.70 kg
Reviews
There are no reviews yet.
Be the first to review “WHARFEDALE TITAN 8W Active 8″ 2-way Bi-Amplified Speaker White” Cancel reply
Amplifier:
The Titan™ 8 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 8 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M6 threaded rigging points are provided for a variety of safe flying configurations with four of these inserts available, bottom-mounted, in an OmniMount® 30.0 bracket footprint.
The Titan™ 8 Active also features a switchable microhpone/line level input with adjustable gain, allowing a dynamic microphone to be used without a mixer for simple presentations.
SPECIFICATIONS
MODEL
TITAN 8 ACTIVE
GENERAL INFO
System type
Active 8" 2-way Bi-Amplified
Frequency response +/- 3db
70Hz-20kHz
HF SECTION
Hf type
Titanium Compression Driver
Horn dispersion (H x V)
90° x 60°
Hf exit size mm / inches
30mm / 1.2“
PHYSICAL FEATURES
Enclosure Material
Injection Moulded Polypropylene
Enclosure Colour
Grey or White or Black
Size (mm/inches)
205mm / 8“
AMPLIFIER POWER
Power On Protection
Power switch on / off mute
Thermal Protection
Amplifier shutdown, auto reset
Low Line Voltage Shut Down
60% Nominal line voltage
Driver Protection
Independent LF and HF limiters
DC Protection
Yes
Short Protection
Yes
Dimensions (HxWxD)
mm
396mm x 266mm x 221mm
inches
15.59" x 10.47" x 8.7“
Impedance
4 Ω
Clip Limiter
Turns on approx 150W output
Limiter Indicator
Red LED
Power Indicator
Blue LED
AC Power details
Power Supply
High Efficiency Switching
Mode Power Supply
AC Power Options
AC100~120V / 220~240V, 50 / 60Hz
Power On Indicator
LED
Rigging / Bracket /
8 M6 threaded inserts including 4
Mounting Options
M6 threaded inserts on bottom in OmniMount 30.0-type footprint
Optional wall-mount bracket
Input A - type
Switchable balanced mic or line level input
Input Sensitivity
Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level
+22dBu
Input Connector
XLR - 1/ 4" Combo jack
Input Impedance
Balanced: 20k ohms
Input B - type
Maximum Input Level
+22dBu
Input Connectors
Combo jack: 1/4" - XLR
Bass Response Optimizer
Subsonic Filter
30Hz, Second-order filter
Amplifiers
Low-Frequency (Class D)
Rated 150W RMS, 300W Peak
High- Frequency (Class A/B)
Rated 30W RMS, 60W Peak
Electronic Crossover
24dB/octave Linkwitz-Riley
Crossover Frequency
2.4kHz
DIMENSIONS & WEIGHT
Net weight ( kg / lbs )
5.7kg / 12.54lbs
Gross weight ( kg / lbs )
7.70kg /16.94lbs
The QSC K.2 Series™ represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.
Features
Best in class audio performance
2000 Watt Class-D amplifier module
Intrinsic Correction™ tuning and loudspeaker management
DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
Refined, professional appearance looks great in any application
Rugged ABS enclosure for long life and lasting durability
Deployment in either main PA or floor monitor position
Factory Presets and savable/recallable Scenes for commonly-used application
Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
Dual pole cup mounts (standard and 7.5 degree down-tilt)
M10 fittings for flown applications
Optional security panel prevents unauthorized tampering of controls
Complete EASE and CAD information available online
Power 3 x Level Rotary encoder (push) 2 x selection buttons
Indicators
Monochrome LCD Display 1.75-inch x 1-inch (45 mm x 25.4 mm) 2 x Power LED (front and rear) 3 x Input Signal LED Input A Mic selected LED Input B Hi-Z selected LED Limiter active LED
Connectors
2 x locking XLR/F ¼⁻ᶦⁿᶜʰ combo (Mic/Line Input and Hi-Z/Line Input 1 x 3.5 mm TRS (Stereo Input) 2 x XLR/M (Loop-thru Output) 1 x XLR/M (Mix Output) 1 x locking IEC power connector
LD Systems STINGER 8 A G3
Active 8" 2-way bass-reflex PA speaker
2-way active 8” bass reflex PA speaker
High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
Multi-purpose design for fullrange, satellite and monitor applications
Application presets for quick frequency response contouring
BEM optimized HF waveguide for uniform coverage
8” custom woofer and BMS compression driver
DynX® DSP technology for distortion-free performance
2 line/mic input channels with individual gain controls plus mono mix out
12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Shock-resistant front grill provides maximum speaker protection
36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
Large selection of smart installation and transport accessories
STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
8 "
Woofer Size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
300 W
Peak power
600 W
Frequency response
70 - 20000 Hz
Max. SPL (peak)
125 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-9 dBu
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching Power Supply
Operating Temperature
0 - 40 °C
Relative Humidity:
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
457 mm
Depth
290 mm
Weight
10,8 kg
Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc.
2000W power via ultra-efficient Class-D amplification
Powerful, one-touch digital mixer with bright OLED screen
Two highly-versatile input channels with FX
Independent channel level, 3-band EQ and effects control
16 great-sounding channel effects include reverb, chorus and delay
XLR/TRS combo and dual RCA connectors
Handles mic, line, stereo and instrument signals
Unmatched system control for professional applications
Multi-band feedback destroyer
Six speaker modes deliver the perfect voicing for your application
Alignment delay up to 300ms for delay stack, balcony, etc.
Three memory locations for instant venue setting recall
Smart Protect DSP dynamically protects amp/driver
Innovative ultra-compact design
1/3 smaller than a traditional 2-way
Fit an entire DLM system in nearly any car
Stack them up for storage
Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
Flyable via standard M10 rigging hardware
Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
Roadworthy PC-ABS cabinet with pro black finish and ergonomic top carry handle
Rugged, powder-coated 20 gauge steel grille
Integrated kickstand delivers perfect angle for personal monitor use
Ridiculously lightweight (22 lbs. / 10kg)
Features
400 Watt digital bi-amplification
126 dB max spl
Wide dispersion 90 x 70 constant directivity horn
8" High power neodymium woofer, 2.5" voice coil
1" Mylar dome, neodymium high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.