| Content | EVP-X18PB: powered version for EVP-X18B; 400W(RWS)/600W
(PEAK); 0-180 degree phase switch, stereo line input and speaker level
input; high pass balanced line output for mid/high satellite speaker connection
SYSTEM TYPE: 18” compact sub - FREQ RESP +/ - 3 DB: 40 - 200Hz -
FINISH MATERIAL: Black carpet - TRIPOD STAND BOTTOM: No -
TRIPOD STAND TOP: Yes - INPUTS: INPUT A: Line level input / INPUT
B: Line level input - SPEAKER LEVEL INPUT: 1/4” TS Phone Jack - INPUT
CONNECTORS: INPUT A: Combined Jack and XLR / INPUT B: Combined
Jack XLR - INPUT SENSITIVITY: MIC: NA / RCA: NA / LINE:
0.775V - INPUT IMPEDANCE: MIC: NA / LINE INPUT A: 10K / LINE
INPUT B: 10K / LINE OUTPUT TYPE: Balanced Male XLR connector -
LINE OUTPUT HIGH PASS FILTER: MAIN EQ: NA - ACTIVE
CROSSOVER: LPF: 150HZ, 24dB - PHASE SWITCH: 0 or 180º - POWER
SECTION-AMPLIFIER POWER, CONTINUOUS: 400W - PEAK: 600W
- EXTENSION SPEAKER OUTPUT: NA - PROTECTION TYPE: Dynamic/
AGC - POWER ON INDICATOR: Green LED - SYSTEM DYNAMIC
AGC: Orange LED - ENCLOSURE - DIMENSION MM
(HXWXD): 610X522X610 - WEIGHT (NET) KG: 49.2 - WEIGHT
(GROSS) KG: 52.3 |
The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.
The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.
The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.
Full specifications
Net Weight 45kg (99lbs)
Dimensions 500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components 1 x 18" (457mm) LF driver
Frequency Response 36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction 18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module
|
Info
18" Dual Self-Powered Subwoofer System. Features Amplifier D Class 2000W (peak) of the Crown with DriveCore technology, built-in DSP, V5 tuning compatible with Vertec systems and VTX, HiQnet Network for remote control via IOS and Android devices. Sturdy construction features carrying handles, fixings M10. The built-in DSP contains 20 PEQ's, delay up to 2 sec, tone generator, input mixing, amplifier monitoring and 50 user preset. Additional features Display LCD for quick and easy configuration and setup. Max SPL 141 dB, frequency response 35Hz- 120Hz (-3dB). dimensions 575 x 1205 x 681 (H x W x D), weight 65,9 kg, color black. Ideal for rental companies, sound, DJ sets, permanent installations.
|
Features
- Powered horn-bass subwoofer system
– High output 18″ loudspeaker
– Polarity switch
– Filtered output defeat switch
– Variable 100 -160 Hz high-pass filter
– Gain control
The Avant 118A is a powered rear-loaded horn-bass subwoofer system designed to provide extended bass response for the Avant full-range cabinets.
A 1250 W Class D amplifier drives a D.A.S. 18LX log excursion bass loudspeaker. The 18LX loudspeaker incoporates a 4″ voice coil for high power handling and output.
The Avant 118A incorporates a 1250 W Class D amplifier with switch mode power supply (SMPS) and digital signal processing (DSP).The amplifier has a unique EQ switch which allows the user to select a Deep subbass response or a Loud bass response. The system includes two balanced inputs with stereo filtered output connections for satellite systems. The variable crossover ranges from 100 Hz-160 Hz and can be defeated to offer stereo "loop thru” connections. A gain control and polarity reverse feature increase user control over the system.
Technical Data
| Nominal LF Amplifier Power | 1250 W (Class D) | | Frequency Range (-10 dB) | Loud: 50 Hz – 142 Hz
Deep: 45 Hz -138 Hz | | Rated Peak SPL at 1 m | 136 dB | | Internal Crossover | Variable 100-160 Hz | | Connectors | INPUT: 2 x Female XLR
LOOP THRU: 2 x Male XLR
AC INPUT: PowerCon NAC 3
AC OUTPUT: Powercon NAC 3 | | AC Requirements | 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz | | Current Draw (1/3 power @ 230 V) | 2.7 A | | Enclosure Material | Birch Plywood | | Color/Finish | Black/Iso-Flex Paint | | Dimensions (H x W x D) | 84 x 60 x 65.5 cm
33 x 23.6 x 25.8 in | | Weight | 55 kg (121 lb) |
| Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 600-watt RMS or 2400-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you\'re a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
- 18-inch subwoofer for powerful low-end up to 29 Hz
- 133 dB max. SPL and 2400 Watt peak power through highly efficient digital Class D power amplifier
- Optimized bass reflex ports
- DynX DSP with four application presets (three crossover frequencies, cardioid mode)
- Switchable signal polarity and adjustable delay line for up to 10 meters
- 2 x XLR/TRS "combo jack" inputs and 2 XLR Output
- 18 mm rugged plywood housing and heavy-duty grill
- 4 Aluminum handles with ergonomic rubber surface
- Securely stackable with four stacking-grooves
- M20 thread for distance pole
Product type
PA subwoofer
Type
Powered
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
100 mm
Amplifier
Class D
RMS
600 W
Peak power
2400 W
Frequency response (-10dB)
29Hz Preset depending
Max. SPL (peak)
133 dB
Protection circuits
Excursion Limiter , over voltage , over-current , Peak Limiter , thermal overload
Controls
Push encoder
Indicators
LC display
Line inputs
2
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 240 V
Power Consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
Width
626 mm
Height
672 mm
Depth
637 mm
Weight
44,3 kg
|
1,600 Watts of Gut-thumping Bass in a Compact Unit!
When you want thumping bass, the powerful Mackie SRM1850 powered subwoofer gives you much more than you'd expect from its compact size. The SRM1850 delivers 1,600 watts of huge-sounding bass through a custom-designed 18" woofer. It's easy to dial in great sound on the fly because the SRM1850 has presets specifically for use with Mackie SRM series loudspeakers. But with a variable digital crossover, it's easy to match with virtually any system too. For a powerful and portable bass reinforcement solution, the Mackie SRM1850 powered subwoofer will exceed your expectations.
Mackie SRM1850 Powered Subwoofer at a Glance:
- A flexible but easy-to-use subwoofer
- Smart DSP enhances your sound and saves you time
A flexible but easy-to-use subwoofer
If you play different rooms of different sizes, you'll love the flexibility of the Mackie SRM1850. And no matter what your system looks like on any given night, the SRM1850 is easy to set up. If you're using it to reinforce Mackie SRM loudspeakers, you'll find presets to match the SRM1850 to the specific speakers you're using (no tweaking required). With other speakers, the variable crossover makes it easy to fit the SRM1850 into the mix. And because it has dual full-range outputs in addition to dual highpassed outputs, you can integrate the SRM1850 into virtually any PA system.
Smart DSP enhances your sound and saves you time
The Mackie SRM1850 powered subwoofer is smart. It has built-in Smart Protect DSP to protect the amp/drivers from signal clipping and crossover presets for use with Mackie's SRM series speakers. These built-in options make setting up the SRM1850 a breeze at any venue. The SRM1850's rugged all-wood, internally braced cabinet uses a tough 18-gauge steel grille to protect its speaker from damage.
Mackie SRM1850 Powered Subwoofer Features:- 1,600W, 18" powered subwoofer with amazingly high size/output ratio
- 18" LF woofer for rich, solid low-frequency reinforcement
- Smart Protect DSP protects amp/driver from signal overloads
- 2 full-range outputs allow you to easily connect side-fill speakers
- 2 highpassed outputs for connecting to DLM Series loudspeakers
- Built-in crossover presets specifically for Mackie SRM series loudspeakers
- Pole mount allows you to attach a speaker pole for main speaker
- Stackable for easy storage/transport
- Compact design is highly portable
The Mackie SRM1850 delivers 1,600 watts of earth-shattering bass in a compact package!
Tech Specs | Powered/Unpowered | Powered | | LF Driver Size | 18“ | | Enclosure Material | All-wood design | | Mounting Options | Floor Only | | Inputs | 2 x XLR | | Outputs | 2 x XLR (high range), 2 x XLR (full range) | | Height | 24.8“ | | Width | 28“ | | Depth | 29.6“ | | Weight | 74 lbs. |
|
Reviews
There are no reviews yet.