XANTECH VDA51 DIGITAL TO ANALOG CONVERTER

SPECIFICATIONS
Input: Coaxial RCA digital audio, PCM stereo or Dolby Digital
Output: Left and Right RCA analog
Frequency Response: 20Hz to 20kHz, (+/- 0.5 dB)
THD: 0.025%
Power Requirement: Input: 100V~240V AC, Output: 5V DC (use Xantech supplied power supply only)
Dimensions (W x H x D):
Unit: 4-3/4” x 1” x 1-15/16” (119 x 25 x 48 mm)
Single pack carton: 7-1/4” x 3-1/2” x 6-1/2” (185 x 85 x 165 mm)
Weight:
Unit: 0.25 lbs (0.12 kg)
Single pack carton: 0.85 lbs (0.40 kg)

The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to our 900 Series and the 560A continues that tradition.

Featuring the same switch-selectable OverEasy? and Hard Knee compression curves as our industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! It’s also versatile enough to go from subtle compression to "brick wall" peak limiting.

Κάρτα τεσσάρων εξόδων line για τα BLU-80, BLU-32, BLU-16. 

                    AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
                    Optional X-Video expansion card to provide master video sync generator
                    Realtime format conversion between all digital formats
                    Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
                    Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
                    Three stage Termination Sensing for each word clock output

                
                INPUTS
                    2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
                    S/PDIF optical on TOS-LINK 44.1-48k
                    S/PDIF coaxial on RCA 44.1-192k
                    ADAT 44.1-48k
                    ADAT/SMUX II for 88.2-96k
                    ADAT/SMUX IV for 176.4-192k
                    Word Clock BNC 44.1 –192k
                    Video
                    Optional video sync (X-Video card)
                
                OUTPUTS
                    2 x AES-EBU on XLR single or double wide 44.1-192k
                    S/PDIF coaxial 44.1-192k
                    S/PDIF optical on TOS-LINK 44.1-48k
                    6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
                    ADAT
                    SMUX II
                    SMUX IV
                    Optional video sync (X-Video card)
                
                SPECS
                    Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
                    Video: PAL/NTSC/60Hz
                    "SuperClock" (256fs)
                    Pull up/down 0.1% and 4% from any sample rate
                    Apogee´s new Ultra Low Jitter C777 clock
                    Three stage termination indicator (under/correct/over) on each
                    Word Clock output:
                    "SureLock" technology for drop out prevention
                    4 digit numeric true sample rate indication
                    Universal power: 15 W 90-250 VAC 50-60 HZ

Connection:

Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
         
Operating System:

Mac and Windows    

The Symphony I/O Chassis from Apogee provides two I/O Module slots for a variety of digital audio conversion options that form the interface side of the Symphony I/O. Elegant and easy to use, the front panel of Symphony I/O Chassis presents the visual feedback needed to monitor levels, sample rate and clock status, along with the controls required to adjust gain, output levels ,and select the Audio Interface Mode (AIM).

The rear panel provides access to the two I/O Module slots that are capable of a combined thirty-two channels of input and output. PCI, USB and Ethernet connectivity ensures complete compatibility with popular workstations, while the panel also includes Wordclock I/O connectors and termination, LoopSynch I/O connectors, and a quiet digitally-controlled fan to keep everything running cool.

The Audio Interface Mode (AIM) allows the system to be optimized for the most popular audio workstation environments, including Symphony PCI, Pro Tools HD PCI, USB audio, or to function as a standalone converter. With a two-step adjustment using a single front panel encoder knob, the interface can be easily switched back and forth between the preferred modes.

The optional five I/O Modules allow the user to choose from standard configurations, or customize the following - channel count, analog to digital input, digital to analog output, microphone preamps (requires an analog card) and digital I/O.