YAMAHA SW-10 Studio Monitor

899.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well […]

 

Read more

The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you’re simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.

GENERAL Type Powered Subwoofer
Crossover Frequency –
Overall Frequency Response 25Hz – 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10″ cone
HF –
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 😯
HF –
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE –
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch –
HIGH TRIM –
LOW TRIM –
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.

Weight 26.50 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA SW-10 Studio Monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA SW-10 Studio Monitor removeGENELEC 7071A ACTIVE SUBWOOFER removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -YELLOW- removeKALI AUDIO WS-12 SUBWOOFER ACTIVE 1000W removeYAMAHA HS-8-S Powered 8'' Studio Subwoofer removePRESONUS TEMBLOR T-10 Active subwoofer 250W remove
NameYAMAHA SW-10 Studio Monitor removeGENELEC 7071A ACTIVE SUBWOOFER removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -YELLOW- removeKALI AUDIO WS-12 SUBWOOFER ACTIVE 1000W removeYAMAHA HS-8-S Powered 8'' Studio Subwoofer removePRESONUS TEMBLOR T-10 Active subwoofer 250W remove
Image
SKUH000.000837071ATURBO 10S YELLOWWS12H000.00134Temblor T-10
Rating
Price 899.00 incl. GR VAT 3,475.03 incl. GR VAT711.75 incl. GR VAT 679.00 incl. GR VAT 555.00 incl. GR VAT 388.99 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.

GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.

Genelec 7071A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.

The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.

The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.

118 dB
Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
2 x 12“
500 W
H x W x D  755 x 803 x 490 mm
81 Kg (178 lb)
6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out

 

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

The WS-12 is a 1000W powered subwoofer for the studio and the stage. With frequency extension down to 23 Hz and 123 dB max SPL, it provides authoritative low end in any setting.

Power. Depth. Adaptability.

The WS-12 Subwoofer is the most powerful studio subwoofer available under $1000. It is made to be used with any near- or mid-field studio monitors, as well as with small portable PA systems in a live setting.

One of the key design specifications for the WS-12 is that it be capable of providing bass management in a 5.1 system where all of the full-range speakers are Kali IN-8s. As such, the WS-12 is powered by a 1000W power amplifier mated to a high-excursion 12-Inch driver.

This much power also makes the WS-12 a capable live subwoofer. Its enclosure is 18mm plywood and it has handles for easy carrying. Kali’s team made sure that it will fit in small passenger cars, so you can take it with you even when you’re calling a ride to get to your gig!

All this power is controlled by a robust, user-friendly DSP section that let you dial in the exact settings you need for your system. Whether you’re using it with a pair of LP-6s, as bass management in a 5.1 system, or on stage with a PA, it’s easy to configure the WS-12 to get exactly what you need.

The WS-12 was designed as a companion subwoofer for Kali’s LP- and IN-Series Studio monitors.

When used with a pair of Kali monitors, the subwoofer’s crossover and gain settings can be configured to precisely match those of the full-range monitors. With these settings dialed in, set the subwoofer between the speakers, and turn all speakers’ volume knob either to noon or all the way up. The subwoofer’s level will be exactly where it needs to in order to match the full- range speakers.

The WS-12 can be used for bass management in systems as large as 5.1 with any Kali monitors.

Convenient settings allow the use of an external crossover, and the WS-12 can even be configured as a dedicated Low Frequency Effects channel.
Powered: Yes
Amp Class: D
Continuous Power: 500W
Peak Power: 1000W
Driver Size: 12 Inches
Freq Response: (-10 dB): 23Hz - 160 Hz
Freq Response: (+/-3 dB): 30Hz - 160 Hz
Crossover: Selectable; See User\'s Manual
Max SPL: 123dB
Unbalanced Inputs: Stereo RCA
Balanced Inputs: Stereo TRS/XLR Combi Jack
Balanced Outputs: Stereo XLR
Other Inputs/Outputs: 1/4-Inch Footswitch Input
Enclosure: 18mm Plywood
Height: 19 Inches (48.3cm)
Depth: 17 Inches (43.2cm)
Width: 16 Inches (40.7cm)
Weight: 63 Lbs (29kg)
  • 8' bass-reflex powered subwoofer delivers low frequencies down to 22Hz
  • 22Hz - 150Hz frequency response
  • High-power 150W amplifier exclusively designed for low frequencies
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
  • XLR and TRS phone for outputs and XLR for L and R and EXT SUB
Type Studio monitor subwoofer
Woofer 8''
Midrange -
Tweeter -
Amplifiers Power 150W
Input/Output Plugs XLR3-31 type (balanced) x2, PHONE (balanced) x2 / Out: XLR3-32 type (balanced) x2 (L&R)
Frequency Response 22Hz - 160Hz
Εqualizer Yes (Low cut switch)
Dimensions (W x H x D) 300mmx350mmx389mm
Weight 12.5kg

To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components

  • 10-inch glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port

​Controls and filters
  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert and ground-lift switch

Power and safety
  • 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated, gravity-calibrated rubber feet for stable placement

Inputs and outputs
  • Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼" TRS outputs 
  • XLR subwoofer output for connecting a second T10
Inputs

2- Balanced XLR

2- Balanced ¼" TRS

2- Unbalanced RCA
   
Outputs

2- Balanced XLR (full range with 80 Hz HPF option)

2- Balanced ¼" TRS (full range with 80 Hz HPF option)

1- Balanced XLR (Sub Out)
Performance
Frequency Response 20 Hz - 200 Hz 
Low Pass Filter Frequency 50 - 130 Hz (variable)
Signal-to-Noise Ratio >98 dB
THD 0.019% @ power
Weight26.50 kg81.00 kg22.40 kg30.00 kg12.50 kg17.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 26.50 kg
Weight 81.00 kg
Weight 22.40 kg
Weight 30.00 kg
Weight 12.50 kg
Weight 17.90 kg