YAMAHA SPX-990 Professional Multi Effect Processor with 20-bit Sound USED (Made in Japan)

299.00

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
PRICE DOES NOT INCLUDE VAT Features Advanced Hardware for Superior Sound The latest 20-bit analog-to-digital and digital-to-analog conversion technology-sampling at 44.1kHz. Frequency response extends all the way from 20 Hz to 20 kHz; dynamic range is an extraordinary 106dB; noise and distortion are neglible. Stereo Configuration with Balanced Inputs and Outputs A true 2-in/2-out stereo […]

 

Read more

PRICE DOES NOT INCLUDE VAT

Features

Advanced Hardware for Superior Sound

The latest 20-bit analog-to-digital and digital-to-analog conversion technology-sampling at 44.1kHz. Frequency response extends all the way from 20 Hz to 20 kHz; dynamic range is an extraordinary 106dB; noise and distortion are neglible.

Stereo Configuration with Balanced Inputs and Outputs

A true 2-in/2-out stereo configuration that allows stereo sources to be processed without disrupting the original stereo image. Stereo inputs and outputs are all electronically balanced, with XLR and TRS phone jack connectors.

Preset, Internal, and Card Memory

180 memory locations “on board“. 80 of these are read-only memory. The remaining 100 are writable memory locations. Plug-in memory cards hold an extra 100 effect programs each.

Three-stage Effect Configuration

In addition to the main effects, the SPX990 provides programmable pre and post effects that can be used to refine and polish your sound.

In-depth Programming Power

The SPX990 has 4 programmable pre effects, 36 programmable main effects, and 3 programmable post effects.

Tempo-based Delay Time Programming

Delay time parameters can be programmed in terms of tempo or note length. Delay time can also be entered via a footswitch or MIDI clock data.

Superior Pitch Precision

The SPX990 achieves faultless pitch tracking through a new dynamic waveform analysis technique. In addition to the simple parallel pitch tracking the SPX990’s “intelligent” pitch change creates appropriate harmony based on a specified key and scale type.

External Parameter Control

The SPX990 allows two selected parameters from each program to be assigned to two external MIDI controllers.

MIDI Control

The SPX990 allows MIDI selection of all programs, and real-time control of up to two selected effect parameters at the same time.

4 Pre-Effects

1. 3-band PEQ *1, 2. Compressor *1, 3. Harmonic Driver *1, 4. Compressor, Dist. and EQ *3 *1= 2 IN – 2 OUT, *2 = 1 IN – 2 OUT, *3 = 1 IN, 1 OUT

36 Main Effects: Reverb, Early Reflections, Delay and Echo, Modulation

REVERB: Reverb *2, Filtered Reverb *2, Stereo Reverb *1, Echo Room *2; EARLY REFLECTIONS: Thin Early Reflection *2, Fat Early Reflection *2, Gate Reverb *2, Reverse Gate *2; DELAY and ECHO: Delay L, C, R *2, Echo *2, Multi Tap Delay *2, Stereo Echo *1, Tempo Mono Echo *2, Tempo Stereo Echo *1, Tempo Quad Echo *1; MODULATION: Flanger *1, Dual Flanger *1, FM Chorus *1, AM Chorus *1, Phaser *1, Symphonic *1 *1= 2 IN – 2 OUT, *2 = 1 IN – 2 OUT, *3 = 1 IN, 1 OUT

Main Effects continued: Pitch Change, Pan, Complex Effects, Freeze

PITCH CHANGE: Mono Pitch Change *3, Dual Pitch Chance *2, Triple Pitch Chance *2, Stereo Pitch Change *1; PAN: Auto Pan *2, Triggered Pan *2; COMPLEX EFFECTS: Chorus and Reverb *2, Symphonic and Reverb *2, Flanger and Reverb *2, Reverb (L) / Reverb (R) *1, ER (L)/ Reverb (R) *1, Echo (L) / Reverb (R) *1, Chorus (L) / Reverb (R) *1, Pan (L) / Pan (R) *1; FREEZE: Freeze *3 *1= 2 IN – 2 OUT, *2 = 1 IN – 2 OUT, *3 = 1 IN – 1 OUT

3 Post Effects

1. 3-band PEQ *1; 2. Compressor *1, Harmonic Driver *1 *1 = 2 IN – 2 OUT

Specifications

Frequency Response 20 Hz – 20kHz +/-0.5 dB

CD Player

Dynamic Range Above 100 dB (typical 106dB)

Specifications

Hum and Noise Below -82 dBm (Typical -88dBm)
Distortion Below 0.005% at max. level 1 kHz
Input/ Number of Channel 2 (Phone Jack)
Input/ Nominal Level +4/-20dBm (Switchable)
Input/ Highest Input +24dBm (Switchable at +4dB)
Input/ Impedance 20 k ohm
Output/ Number of Channel 2 (Phone Jack)
Output/ Nominal Level +4/-20dBm (Switchable)
Output/ Highest Output +18dBm (Switchable at +4dB)
Output/ Impedance 150 ohm
A/D Conversion 20 bits
D/A Conversion 20 bits
Sampling Freq. 44.1kHz
Preset Program 1 – 80
User Memory Program 1 – 99,00
Optional Memory Card 1 – 99,00
Front Panel/ Control Input Level (L,R), Data Entry
Front Panel/ Keys Function Key x 6, Page Select Key x 2, Memory, Store, Edit, Bypass
Front Panel/ Display 2 ch. 8 segment LED (Level Meter) 6 segment LED (Mode Indicator) 7 segment LED (Memory No.) Memory, Edit, Bypass indicators 24 chara x 2 Line LCD
Front Panel/ Slot Memory Card
Rear Panel/ Connectors Input L/R (XLR x 2, Phone jack x 2 Output L/R (XLR x 2, Phone jack x 2) MIDI In, Thru/Out (DIN 5P x 2) Trigger (Phone Jack x 1) Bypass or INC/DEC (Phone Jack x 1)
Rear Panel/ Switch In/Out Level Switch (+4dB/ -20dB x 2) MIDI Thru/ Out Switch
Power Requirements US and Canadian Models: 120V, 60Hz British Model:240V, 50Hz General Model:230V, 50Hz
Power Consumption 25W
Dimensions 480 x 46 x 324.4 mm
(W x H x D) (18-7/8″ x 1-13/16″ x 12-3/4“) (including attachments)
Weight 4.6 kg (10lbs. 2oz)
Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA SPX-990 Professional Multi Effect Processor with 20-bit Sound USED (Made in Japan)”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA SPX-990 Professional Multi Effect Processor with 20-bit Sound USED (Made in Japan) removeBSS AUDIO FCS-966 Opal Constant Q Graphic Equalizer-Used- removeGepco Passive D.I. Box USED removeBSS DPR-504 QUAD NOISE GATE -SECOND HAND- removeOutline FSC1 Processor For Formula Stack System -SECOND HAND- removeSAMSON S-COM 4 Four Channel Compressor-Gate Processor (USED) remove
NameYAMAHA SPX-990 Professional Multi Effect Processor with 20-bit Sound USED (Made in Japan) removeBSS AUDIO FCS-966 Opal Constant Q Graphic Equalizer-Used- removeGepco Passive D.I. Box USED removeBSS DPR-504 QUAD NOISE GATE -SECOND HAND- removeOutline FSC1 Processor For Formula Stack System -SECOND HAND- removeSAMSON S-COM 4 Four Channel Compressor-Gate Processor (USED) remove
Image
SKUSPX990FCS966SHGEPCODPR 504FSC1SCOM 4 USED
Rating
Price299.00 285.0019.00 285.00 550.00 80.00
Stock

Only 1 left in stock

Only 2 left in stock

Only 1 left in stock

Only 1 left in stock

Only 2 left in stock

Available on backorder

AvailabilityOnly 1 left in stockOnly 2 left in stockOnly 1 left in stockOnly 1 left in stockOnly 2 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPRICE DOES NOT INCLUDE VAT Features Advanced Hardware for Superior Sound The latest 20-bit analog-to-digital and digital-to-analog conversion technology-sampling at 44.1kHz. Frequency response extends all the way from 20 Hz to 20 kHz; dynamic range is an extraordinary 106dB; noise and distortion are neglible. Stereo Configuration with Balanced Inputs and Outputs A true 2-in/2-out stereo configuration that allows stereo sources to be processed without disrupting the original stereo image. Stereo inputs and outputs are all electronically balanced, with XLR and TRS phone jack connectors. Preset, Internal, and Card Memory 180 memory locations "on board“. 80 of these are read-only memory. The remaining 100 are writable memory locations. Plug-in memory cards hold an extra 100 effect programs each. Three-stage Effect Configuration In addition to the main effects, the SPX990 provides programmable pre and post effects that can be used to refine and polish your sound. In-depth Programming Power The SPX990 has 4 programmable pre effects, 36 programmable main effects, and 3 programmable post effects. Tempo-based Delay Time Programming Delay time parameters can be programmed in terms of tempo or note length. Delay time can also be entered via a footswitch or MIDI clock data. Superior Pitch Precision The SPX990 achieves faultless pitch tracking through a new dynamic waveform analysis technique. In addition to the simple parallel pitch tracking the SPX990's "intelligent" pitch change creates appropriate harmony based on a specified key and scale type. External Parameter Control The SPX990 allows two selected parameters from each program to be assigned to two external MIDI controllers. MIDI Control The SPX990 allows MIDI selection of all programs, and real-time control of up to two selected effect parameters at the same time. 4 Pre-Effects 1. 3-band PEQ *1, 2. Compressor *1, 3. Harmonic Driver *1, 4. Compressor, Dist. and EQ *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT 36 Main Effects: Reverb, Early Reflections, Delay and Echo, Modulation REVERB: Reverb *2, Filtered Reverb *2, Stereo Reverb *1, Echo Room *2; EARLY REFLECTIONS: Thin Early Reflection *2, Fat Early Reflection *2, Gate Reverb *2, Reverse Gate *2; DELAY and ECHO: Delay L, C, R *2, Echo *2, Multi Tap Delay *2, Stereo Echo *1, Tempo Mono Echo *2, Tempo Stereo Echo *1, Tempo Quad Echo *1; MODULATION: Flanger *1, Dual Flanger *1, FM Chorus *1, AM Chorus *1, Phaser *1, Symphonic *1 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT Main Effects continued: Pitch Change, Pan, Complex Effects, Freeze PITCH CHANGE: Mono Pitch Change *3, Dual Pitch Chance *2, Triple Pitch Chance *2, Stereo Pitch Change *1; PAN: Auto Pan *2, Triggered Pan *2; COMPLEX EFFECTS: Chorus and Reverb *2, Symphonic and Reverb *2, Flanger and Reverb *2, Reverb (L) / Reverb (R) *1, ER (L)/ Reverb (R) *1, Echo (L) / Reverb (R) *1, Chorus (L) / Reverb (R) *1, Pan (L) / Pan (R) *1; FREEZE: Freeze *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN - 1 OUT 3 Post Effects 1. 3-band PEQ *1; 2. Compressor *1, Harmonic Driver *1 *1 = 2 IN - 2 OUT Specifications
Frequency Response 20 Hz - 20kHz +/-0.5 dB
CD Player
Dynamic Range Above 100 dB (typical 106dB)
Specifications
Hum and Noise Below -82 dBm (Typical -88dBm)
Distortion Below 0.005% at max. level 1 kHz
Input/ Number of Channel 2 (Phone Jack)
Input/ Nominal Level +4/-20dBm (Switchable)
Input/ Highest Input +24dBm (Switchable at +4dB)
Input/ Impedance 20 k ohm
Output/ Number of Channel 2 (Phone Jack)
Output/ Nominal Level +4/-20dBm (Switchable)
Output/ Highest Output +18dBm (Switchable at +4dB)
Output/ Impedance 150 ohm
A/D Conversion 20 bits
D/A Conversion 20 bits
Sampling Freq. 44.1kHz
Preset Program 1 - 80
User Memory Program 1 - 99,00
Optional Memory Card 1 - 99,00
Front Panel/ Control Input Level (L,R), Data Entry
Front Panel/ Keys Function Key x 6, Page Select Key x 2, Memory, Store, Edit, Bypass
Front Panel/ Display 2 ch. 8 segment LED (Level Meter) 6 segment LED (Mode Indicator) 7 segment LED (Memory No.) Memory, Edit, Bypass indicators 24 chara x 2 Line LCD
Front Panel/ Slot Memory Card
Rear Panel/ Connectors Input L/R (XLR x 2, Phone jack x 2 Output L/R (XLR x 2, Phone jack x 2) MIDI In, Thru/Out (DIN 5P x 2) Trigger (Phone Jack x 1) Bypass or INC/DEC (Phone Jack x 1)
Rear Panel/ Switch In/Out Level Switch (+4dB/ -20dB x 2) MIDI Thru/ Out Switch
Power Requirements US and Canadian Models: 120V, 60Hz British Model:240V, 50Hz General Model:230V, 50Hz
Power Consumption 25W
Dimensions 480 x 46 x 324.4 mm
(W x H x D) (18-7/8" x 1-13/16" x 12-3/4“) (including attachments)
Weight 4.6 kg (10lbs. 2oz)
PRICE WITHOUT V.A.T. BSS Opal FCS-966 Constant Q Graphic Eq Graphic equalisers are found in just about every sound application, from room contouring to feedback control and general audio sweetening. Traditionally, much general eq'ing takes place on the faders alone, but this restricts the use of the faders at each end of the scale for further precision eq work. So we provided the Opal FCS-966 with separate LF and HF contour filters which can change an overall sound balance without disturbing a detailed room or loudspeaker response. These filters are very musical gentle boost and cut shelving filters which can be used to add (or remove) room effects that change with temperature, audience numbers or humidity. All these effects can be easily made without disturbing the critical fader settings already made. Constant Q Filters The modern generation of graphic eq's uses the Constant Q topology, pioneered by BSS Audio, which means that the filter width is constant whatever the fader gain setting. Compared to the earlier 'gyrator' style of filters, Constant Q filters provide a smoother and more predictable interaction between adjacent faders and the resulting eq curve more closely resembles the actual fader positions. More Gain Control Per Filter Each eq fader has +/-15dB of adjustable gain, more than many competitive graphic eq's. The faders are long-throw 45mm types for precision control. High Pass Filter Also provided on the FCS-966 is a sweepable high-pass filter which can be used very effectively to restrict the low-energy output for better amplifier and loudspeaker performance. Stage monitors also benefit from the application of a high-pass filter to remove bass signals e.g. from vocal-only wedges. Metering BSS Audio believes in providing engineers with information, and the FCS-966's 8-segment led meter shows output level and warns of signal clipping within the eq. When the unit is switched to bypass, the meter will read the input level, allowing accurate matching of the 'dry' and equalised signals using the gain control. Centre Bypass When any eq fader is in its centre detent position, the filter is automatically bypassed, for optimum performance. Input/Outputs All the inputs and outputs of the FCS-966 are electronically balanced, with optional transformer balancing. To make installation of the FCS-966 easier, we've provided three differerent interface connectors: XLR-type, 1/4" TRS jack and Phoenix/Combicon screw terminals. Relay Bypass The EQ IN buttons switch the EQ path into circuit. When switched out, or power fails, a high-quality relay switches the input signal directly to the output connectors. Control Descriptions Faders 30 EQ filter faders on ISO centres, each with nominal +/-15dB of gain. Positive centre-detent on 45mm long-throw precision faders. HP Filter Sweepable high pass filter, frequency adjustable from OUT (flat) up to 250Hz. LF Contour Smooth shelving filter, +/-6dB of gain at 50Hz HF Contour Smooth shelving filter, +/-6dB of gain at 14kHz. GAIN Used for overall unity gain adjustment. Adjustable from - infinity to +10dB. CLIP Triple-point clip detector that indicates red when the internal signal is clipping at any one of three critical points. LED Meter Shows output signal level (input signal when eq is bypassed) from -24dBu to +18dBu in 8 steps.

PRICE DOES NOT INCLUDE VAT

Gepco Passive D.I. Box-2nd Hand-

Outline FSC1 Processor-2nd Hand- FEATURING Customized functions FOC1 dedicated controller for Flyone loudspeaker system SC1 dedicated controller for Spectra loudspeaker system NC1 dedicated controller for Integra loudspeaker system MEC1 dedicated controller for Media loudspeaker system FSC1 dedicated controller for Formula Stack louds. System TFC1 dedicated controller tor Topfly loudspeaker system MRC1 dedicated controller for Road loudspeaker system TLC1 : dedicated controller for Tripla loudspeaker system Dynamically invariant filter transfer function RMS limiters on each output Subwoofer dedicated output Adjustable band gain Polarity inversion switches Muting switches   DESCRIPTION Designed with the most advanced audio technologies the Outline Controller Series are true professional active dedicated control units for some Outline loudspeaker system models. Developed to meet the most demanding requirements of the sound reinforcement applications, the Outline Controller Series provides nonstop operation with absolute stability and reliability. Only IEC approved components and parts are used in these active controllers and they are manufactured to satisfy and to be in according with safety objects stated for “electrical device” working within the limits of pertinent CE, European Community directive. Based on a plugin filter card design, the Outline Controller Series allows the operation to those Outline loudspeaker systems that needs this kind of external assistance to perform of its best. The Outline FOC1, SC1, MEC1, NC1 two ways with subbass output controllers, are designed for the Outline Flyone, Spectra, Media, Integra loudspeaker system. The Outline FSC1, TFC1, MRC1, TLC1, three ways with subbass output are designed for the Outline FormulaStack, TopFly, RoadSystem, Tripla loudspeaker system. All models have customized band splitting, filter transfer function and signal time alignment tailored to the loudspeaker system for which are designed. All models have dynamic control with loudspeaker protection purposes, obtained with RMS limiters with adjustable threshold that are available on each output. All models have a very low frequency output that can be used to drive the Outline Bass Series or Sub Series low frequency units. All models have level control on each output, polarity inverters, muting switches, subsonic filters, RMS limiters and active balanced input and outputs with XLR connectors. Perspex security cover are included. Dimensions of all models are 483mm width, 44mm height, 210mm depth. SPECIFICATIONS Product name: Outline FOCI, SC1, NCI, MEC1, FSC1, TFC1, MRC1, TLC1 Product type: Dedicated active controller Channels: 1 Ways: FOCI: 2 ways + subwoofer SC1: 2 ways + subwoofer NCI: 2 ways + subwoofer MEC1 : 2 ways + subwoofer FSC1: 3 ways + subwoofer TFC1: 3 ways + subwoofer MRC1: 3 ways + subwoofer TLC1: 3 ways + subwoofer Crossover frequencies: fixed customized Filter slope: fixed customized Filter transfer function: fixed customized Input impedance: 20 kΩ balanced Frequency response: 20-20000 Hz ± 0.3 dB Output impedance: 600Ω balanced Total harmonic distortion (THD): <0.01% Total intermodulation distortion (SMPTE): <0.01% Signal to noise ratio: > 100dBA Subsonic filter: Butterworth 18 Hz, 18 dB octave Controls: Front panel: Power on, output level, polarity, output mute, limiting threshold, input gain adjust Rear panel switches: Balanced/unbalanced input and outputs, limiters on Display: Front panel: Power on, signal present, limiting action, input overloading Connectors: XLR, Pin 1 ground, Pin 2 hot, Pin 3 cold Power supply: AC from 100 -to 240V/50-60 Hz Power consumption: 20W Dimensions and net weight: Front panel Standard EIA 19" 1 U 483mm width, 44mm height, 210 mm depth, all models 3.3 net weight. Dimensions volume and gross weight: all models, 55cm width, 8cm height, 30cm depth, volume 0.01 m3, 4.3 gross weight.  

USED IN GOOD CONDITION.

Price does not include vat

The S com 4 is a compact and versatile single-rack space device that provides
four channels of high quality dynamics processing with an Expander/Gate and
Compressor/Limiter on each channel.
The four channels operate independently or in stereo pairs. Its multi-segment LED
metering displays input/output level as well as gain reduction. The Expander/Gate
section features a continuously variable Threshold control as well as a switch for
fast or slow release times.
The Compressor/Limiter section includes variable Threshold, Ratio and Output levels.
S com 4\'s Enhancer switch restores high frequencies that are sometimes diminished
by heavy compression. This wide-ranging combination of features makes the S com
4 an efficient and versatile audio tool for a wide variety of applications. Its clean and
quiet audio characteristics make it ideal where high sonic integrity is imperative. 
 
FEATURES:

4 Channel Compressor/Limiter, Expander/Gate with Enhancer
Linkable in two Stereo pairs
Expander/Gate with variable Trigger control and switchable Fast/Slow Release
5 Segment LED meters for Input/Output levels and Gain Reduction on each channel
Advanced circuit design utilizing Low Noise Operational
Amplifiers and High Quality VCA\'s
Servo Balanced Inputs and Outputs on XLR and 1/4" connectors
SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee
based on the level of Input signal applied
Individual Threshold and Ratio controls on each channel
Three-year extended warranty 

Weight2.50 kg3.00 kg0.50 kg2.00 kg7.00 kg3.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 3.00 kg
Weight 0.50 kg
Weight 2.00 kg
Weight 7.00 kg
Weight 3.40 kg