TOA F-1522SC Ceiling Speaker 6W

64.45 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA’s new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an […]

 

Read more

  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA’s new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker’s response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal “back can” enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C’s speaker response.
Specifications
Enclosure n/a
Rated Input 6W (high impedance)
Power Handling Capacity Continuous pink noise: 9W(8), 6W (16)
Continuous program: 18W (8), 12W(16)
Impedance (100V Line) 1.7kΩ (6W), 3.3kΩ (3W)
Impedance (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W)
Impedance (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W)
Low (Adjustable) 16Ω, 8Ω
Sound Pressure Level 88dB (1W, 1m)
Frequency Response 65 – 18,000Hz (-10dB), 45 – 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: 10cm cone- type
Speaker Component Low frequency: 10cm cone- type
Mounting Hole ø135mm(maximum ceiling thickness: 37mm)
Input Terminal Push-in connector (Bridging terminal-2 branch type)
Usable Cable 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 – ø1.6mm (equivalent to AWG No.20 – 15)
7-core twisted copper wire:0.75 – 1.25mm² (equivalent to AWG No.18 – 17)
Finish Enclosure n/a
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag Artificial fiber, black
Dimensions ø155 x 117 (D)mm
Weight 1kg (including panel)
Accessories Panel 1
Ceiling reinforcement ring n/a
Safety wire n/a
Paper pattern 1
Option Anchor hanging bracket n/a
Back can HY- BC1
Tile bar bridge n/a
Trim ring n/a
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “TOA F-1522SC Ceiling Speaker 6W”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA F-1522SC Ceiling Speaker 6W removeJBL CONTROL 321CT 12" Coax Speaker, 250 Watts, 34Hz-18kHz removeTOA PC-2869 Ceiling Mount Speaker 6W,8' removeJBL CONTROL-227CT-PL Ceiling Speaker, Coaxial 250W removeTOA PC-5CL 5W Clean Room Ceiling Speaker, 150-20,000 Hz Frequency Response, 87dB Sensitivity, 2 kOhms at 5W Rated Impedance, Single removeTOA PC-3WR Ceiling Speaker 3W remove
NameTOA F-1522SC Ceiling Speaker 6W removeJBL CONTROL 321CT 12" Coax Speaker, 250 Watts, 34Hz-18kHz removeTOA PC-2869 Ceiling Mount Speaker 6W,8' removeJBL CONTROL-227CT-PL Ceiling Speaker, Coaxial 250W removeTOA PC-5CL 5W Clean Room Ceiling Speaker, 150-20,000 Hz Frequency Response, 87dB Sensitivity, 2 kOhms at 5W Rated Impedance, Single removeTOA PC-3WR Ceiling Speaker 3W remove
Image
SKUF-1522SCCONTROL 321CTPC-2869CONTROL 227CT-PLPC-5CLPC-3WR
Rating
Price 64.45 incl. GR VAT 634.24 incl. GR VAT 57.22 incl. GR VAT 443.99 incl. GR VAT 133.99 incl. GR VAT 116.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications
Enclosure n/a
Rated Input 6W (high impedance)
Power Handling Capacity Continuous pink noise: 9W(8), 6W (16)
Continuous program: 18W (8), 12W(16)
Impedance (100V Line) 1.7kΩ (6W), 3.3kΩ (3W)
Impedance (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W)
Impedance (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W)
Low (Adjustable) 16Ω, 8Ω
Sound Pressure Level 88dB (1W, 1m)
Frequency Response 65 - 18,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: 10cm cone- type
Speaker Component Low frequency: 10cm cone- type
Mounting Hole ø135mm(maximum ceiling thickness: 37mm)
Input Terminal Push-in connector (Bridging terminal-2 branch type)
Usable Cable 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17)
Finish Enclosure n/a
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag Artificial fiber, black
Dimensions ø155 x 117 (D)mm
Weight 1kg (including panel)
Accessories Panel 1
Ceiling reinforcement ring n/a
Safety wire n/a
Paper pattern 1
Option Anchor hanging bracket n/a
Back can HY- BC1
Tile bar bridge n/a
Trim ring n/a

Features:

  • Consistent 90° broadband pattern control.
  • Components:
    300 mm (12 in) woofer with Kevlar-reinforced cone with 50 mm (2 in) voice-coil.
    25 mm (1 exit) compression driver.
  • Extraordinary clarity for speech and vocals with extended frequency response for music.
  • 250 Watt power handling with high sensitivity provides high SPL capability.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • Clean, contemporary grille and optional backbox available.

 

  • System:
  • Frequency Range (-10 dB): 34 Hz – 18 kHz
  • Frequency Response (±3 dB): 47 Hz – 16 kHz
  • Coverage Pattern: 90° conical, broadband (Avg 1k - 16kHz)
  • Directivity Factor (Q): 8.7 (1k - 16kHz)
  • Directivity Index (DI): 9.4 dB (1k - 16kHz)
  • Long-Term System 250 W (1000 W peak), 2 hrs
  • Power Rating, IEC: 150 W (600 W peak), 100 hrs
  • Sensitivity (2.83V@ 1m):
    94 dB measured half-space
    99 dB computed for competitive comparison
  • Maximum SPL: 118 dB cont ave (124 dB peak)
  • Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
  • Nominal Impedance (321C): 8 ohms
  • Transformer Taps(321CT): 70V: 60W, 30W, 15W, & 7.5W 100V: 60W, 30W & 15W
  • Transducers:
  • Low Frequency Driver: Kevlar reinforced cone, 50 mm (2 in) voice coil.
  • High Frequency Driver: JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
  • Physical:
  • Input Connector (321C): Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • 321C:
    1) + in
    2) + loop out
    3) – loop out
    4) – in
  • Tap Connection (321CT): 321CT:
    A) Common
    B) 7.5W@70V, 15W@100V
    C) 15W@70V, 30W@100V
    D) 30W@70V, 60W@100V
    E) 60W@70V, n/c@100V
  • Safety Agency Rating: In accordance with IEC60849 / EN60849, Transformer in CT model
    UL Listed per UL1876
  • Baffle: Metal, 366 x 366 mm (14.4 x 14.4 in), driver pre-mounted to baffle, ported, EZRail™ for easier installation to backbox.
  • Baffle Attachment to MTC-300BB12 Backbox: Attach via either 4 corner holes M4 x 14 mm machine screws, or 6 side/end holes #10 x 0.5 in (12 mm) sheet metal screws.
  • Grille Attachment to Baffl e: 4 pcs 4 mm machine screws in corners.
  • Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffl e x depth from back of baffl e of 223 mm (8.8 in) on 321C & 240 mm (9.5 in) on 321CT.
  • Net Weight: 321C: 7.3 kg (16.0 lbs) 321CT: 8.2 kg (18.0 lbs)
  • Shipping Weight: 321C: 8.8 kg (19.4 lbs) 321CT: 9.8 kg (21.6 lbs)
  • Included Accessories: Ported baffl e pre-attached, transformer on 321CT.
  • Optional Accessories:
    MTC-300SG12 Grille, square contoured, white.
    MTC-300BB12 Backbox, 80 liters (3 cubic feet)
    MTC-300T150 Transformer, 150 W for use with 321C.
  • Integrated with a speaker unit and panel, the PC-2869 Ceiling Mount Speaker is of all metallic construction and ideal for use in a voice alarm system. It feature spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. The push-in type input terminal block makes cable connections easy and allows bridge wiring.

    Specification
    Rated Input 6 W (100 V line), 3 W (70 V line)
    Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
    70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
    Sensitivity 94 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise)
    Frequency Response 40 - 20,000 Hz (peak -20 dB)
    Speaker Component 20 cm (8“) double cone-type
    Dimensions for Fixing Hole Mounting hole: φ250±3 mm (φ9.84“±0.12“)
    Ceiling thickness: 5 - 25 mm (0.2" - 0.98“)
    Speaker Mounting Method Spring clamp
    Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
    Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
    7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
    Connection Push-in connector (bridging terminal-2 branch type
    Finish Baffle: Steel plate, off-white (RAL 9010 or equivalent color), paint
    Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color),
    paint
    Dimensions φ280 × 92 (D) mm (φ11.02" × 3.62“)
    Weight 1.4 kg (3.09 lb)
    Accessory Paper pattern …1

     

    The JBL Professional Control 227CT is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227CT incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

    The Control 227CT features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 227CT enabling the system to be used on 70V or 100V distributed speaker lines.

    The Control 227C and CT are easy to install and feature a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.

    The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C and CT is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

    To ensure long life and reliability, Control 227C and CT pass JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.

    Features

    • Consistent 120° broadband pattern control for exceptional coverage
    • Coaxial design featuring: Kevlar-reinforced 6.5" woofer; 1" compression driver
    • Extraordinary clarity for speech and vocals with extended frequency response for music
    • 150 Watts Power Handling
    • Advanced high-slope crossover network for constant coverage and smooth, natural midrange
    • Integrated back can with clean, contemporary grille (sold separately)

    Specifications

    • Frequency Range (-10dB): 43Hz - 19kHz
    • Frequency Response (-3dB): 75Hz - 17kHz
    • Nominal Sensitivity: 90dB measured half-space; 95dB computed for competitive comparison
    • Nominal Coverage Angle: 120 degrees conical, broadband
    • Nominal Impedance: 8 ohms
    • Low Frequency: 6.5" Kevlar reinforced cone
    • High Frequency: 1" exit compression driver
    • Dimensions (H x Dia.): 12" round baffle x depth from back of baffle of 5.8“

    The TOA Electronics 5W Clean Room Ceiling Speaker is ideal applications include clean rooms, hospitals and laboratory

    Rated Input5WRated Impedance100V Line: 2 kOhms (5W)
    70V Line: 2 kOhms (2.5W)Sensitivity87 dB (1 W, 1 m)Frequency Response150Hz - 20kHzEnclosureCompletely sealed typeSpeaker Component8cm cone-type (vibration section: high molecular substance)Operating Temperature Range-20 deg. C to +60 deg. C / -4 deg .F to +140 deg. FChemical ResistanceResistive to formalin solvent and iodine liquid (disinfectant)FinishPanel: Allory-coated ABS resin
    Enclosure: ABS resin, off-white
    Punching net: Stainless steel
    Exposed fixing screw: Stainless steelDimensionsDia. x D: 4.57 x 4.33" / 116 x 110mm
    Fixing Holes: dia. 3.86" / 98mmWeight21.87oz / 620g

    Μεγάφωνο οροφής 5W με μετ/στή 100V, κλειστού θαλάμου σχεδιασμένο για εργαστήρια ερευνών (χημικά, βιολογικά κ.λ.π.) & δωμάτια υπολογιστών.

    • Compact, high power handling.
    • Completely sealed flush mounted high humidity area speaker.
    • Plastic film diaphragm rated at 3W at 3.3k Ω and 1W at 10k Ω.
    • Stainless steel punching net.
    • ABS resin enclosure / Alloy coated ABS resin panel.
    Specification
    Rated Input 3W, 1W
    Rated Impedance 3.3k Ω (3W), 10k Ω (1W)
    Sound Pressure Level 88dB (1W, 1m)
    Frequency Response 120 ~ 20,000Hz
    Ambient Temperature -10 ~ +60°C
    Dimensions for Fixing Hol ø150mm / Ceiling thickness; up to 50mm
    Dimensions ø180 x 10 (exposed section) + 110mm
    Weight 700g
    Finish Frame and case; ABS resin, Off-white / Punching net; Stainless steel.
    Weight1.00 kg9.80 kg1.40 kg6.50 kg1.00 kg0.70 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 1.00 kg
    Weight 9.80 kg
    Weight 1.40 kg
    Weight 6.50 kg
    Weight 1.00 kg
    Weight 0.70 kg