DBX 160A Compressor / Limiter ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ (Made in USA)

No longer available!

220.00

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: DBX 160A Category:
PRICE DOES NOT INCLUDE VAT Features OverEasy® or classic hard knee compression with dbx’s® ultra-musical program dependent attack and release times Compression ratio variable from 1:1 through infinity :1 to negative compression Precision dual RMS LED display monitors input or output and gain reduction over a wide range and calibrates for different operating levels Over […]

 

Read more

PRICE DOES NOT INCLUDE VAT
Features

  • OverEasy® or classic hard knee compression with dbx’s® ultra-musical program dependent attack and release times
  • Compression ratio variable from 1:1 through infinity :1 to negative compression
  • Precision dual RMS LED display monitors input or output and gain reduction over a wide range and calibrates for different operating levels
  • Over 60dB of gain reduction available
  • Exclusive Infinity+ compression allows negative compression
  • Independent balanced and unbalanced outputs can drive 600 loads to +24dBm simultaneously. New floating balanced output stage drives any load
  • Optional output transformer capable
  • Strappable with another 160A for true RMS stereo summing operation

 

Specifications

Input Connectors 1/4″ TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot
Input Impedance 40k
Max Input +24dBu, Balanced or Unabalanced (Absolute)
CMRR >45dB (any Frequency)
Detector Input Connector: 14″ TRS phone, Floating Balanced
Detector Input Impedance >200k
Detector Input Max Level +28dBu, Balanced or Unbalanced
Output Connectors 1/4″ TRS phone, Unbalanced; XLR, floating balanced; pin 2 hot
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output (Balanced): +24dBm;
Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “DBX 160A Compressor / Limiter ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ (Made in USA)”

Your email address will not be published. Required fields are marked *

Quick Comparison

DBX 160A Compressor / Limiter ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ (Made in USA) removeDOD 2x15 Equalizer-SECONH HAND- removeBSS FDS-334 MINIDRIVE LOUDSPEAKER MANAGEMENT SYSTEM 2IN/4OUT -USED- removeDOD SR830 Graphic equalizer stereo USED (Made in USA) removeTC ELECTRONIC M-2000 STUDIO EFFECTS PROCESSOR(USED) Made in Denmark removeOutline FSC1 Processor For Formula Stack System -SECOND HAND- remove
NameDBX 160A Compressor / Limiter ΜΕΤΑΧΕΙΡΙΣΜΕΝΟ (Made in USA) removeDOD 2x15 Equalizer-SECONH HAND- removeBSS FDS-334 MINIDRIVE LOUDSPEAKER MANAGEMENT SYSTEM 2IN/4OUT -USED- removeDOD SR830 Graphic equalizer stereo USED (Made in USA) removeTC ELECTRONIC M-2000 STUDIO EFFECTS PROCESSOR(USED) Made in Denmark removeOutline FSC1 Processor For Formula Stack System -SECOND HAND- remove
Image
SKUDBX 160ADOD 2x15FDS-334SR830M2000FSC1
Rating
Price220.00 99.20 incl. GR VAT 480.00 100.00 300.00 550.00
Stock

Out of stock

Only 1 left in stock

Only 1 left in stock

Only 1 left in stock

Only 1 left in stock

Only 2 left in stock

AvailabilityOut of stockOnly 1 left in stockOnly 1 left in stockOnly 1 left in stockOnly 1 left in stockOnly 2 left in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PRICE DOES NOT INCLUDE VAT
Features

  • OverEasy® or classic hard knee compression with dbx's® ultra-musical program dependent attack and release times
  • Compression ratio variable from 1:1 through infinity :1 to negative compression
  • Precision dual RMS LED display monitors input or output and gain reduction over a wide range and calibrates for different operating levels
  • Over 60dB of gain reduction available
  • Exclusive Infinity+ compression allows negative compression
  • Independent balanced and unbalanced outputs can drive 600 loads to +24dBm simultaneously. New floating balanced output stage drives any load
  • Optional output transformer capable
  • Strappable with another 160A for true RMS stereo summing operation
  Specifications
Input Connectors 1/4" TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot
Input Impedance 40k
Max Input +24dBu, Balanced or Unabalanced (Absolute)
CMRR >45dB (any Frequency)
Detector Input Connector: 14" TRS phone, Floating Balanced
Detector Input Impedance >200k
Detector Input Max Level +28dBu, Balanced or Unbalanced
Output Connectors 1/4" TRS phone, Unbalanced; XLR, floating balanced; pin 2 hot
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output (Balanced): +24dBm;

PRICE WITHOUT V.A.T. 23%

PRICE WITHOUT V.A.T.

The BSS FDS-334T is a 2 input / 4 output loudspeaker management system with
Features such as : Fast-access edit input and output, Each output is assignable
to either input or to sum of inputs, Navipad menu navigation, Bright blue text display,
Crossover, assignable PEQ mid-filter limiters, polarity and delay on each output,
Assignable parametric EQ and delay on each input, LED bargraphs on every input
and output, 6, 12, 18, 24 or 48dB per octave Butterworth, Bessel or Linkwitz crossover
alignments, 60 user programs, Lockable front panel mutes and level trims and MIDI control.

 

Features
• Dual 15-band equalizer
 
• Constant Q
 
• Low cut filter at 50Hz with a 12dB/Octave slope
 
• Balanced XLR inputs and outputs
• Bal 1/4" inputs and impedance balanced 1/4" outputs
-
• ISO 2/3 octave frequency centers
PRICE DOES NOT INCLUDE VAT

Longer throw faders provide more precise adjustments when equalizing a room. The SR830QXLR offers 2 channels of equalization each with 15 bands of 45mm faders. The all steel chassis construction can handle the abuse of the road, or the solace of a permanent installation.

PRICE DOES NOT INCLUDE VAT

 

Art + Science = Magic

The Engineering Group at TC Electronic were given carte blanche to create the optimal studio
signal processor. Being musicians and studio engineers themselves, they know what is important
and have a feel for what you are looking for. Working on the borderline between art and science,
they created the M2000.
Designed for the artist within you, you will create magic when using the M2000.

Main features  

Magic
The M2000 provides you with a broad palette of high quality effects enabling you to
create magical effects. The true dual engine configuration allows you to run two full-
blown effects simultaneously, i.e. on two individual effects sends. The effects have
been developed for optimal sonic quality with no compromises made. This has only
been possible because our engineers succeeded in combining the latest technology
with TC's powerful DARC? chip.

Ultimate User-Interface
The user-friendly TC feature, the Recall Wizard, instantly finds the preset that suits
your need in any situation. You simply enter your preferences, such as gentle reverb
for vocal, or extra pitch for guitar and the Wizard serves you a short list of presets ready
to compare and use.

Uncompromising Effects
The M2000 gives you access to a stunning array of Reverb, Pitch-shifting, Delays, Chorus,
Dynamics etc. Among the included reverbs you?ll find the unique Co-efficient Optimized
Room Emulator or C.O.R.E. Reverb? based upon TC?s famous reverberation Technology.
Another unique feature in the M2000 is the Dynamic Morphing. This function enables you to
apply e.g. Chorus to a vocal at low volume levels, while the same effect is being morphed into
flanging at high levels giving the signal a totally new dynamic dimension.

The Sensation
The M2000 is fully prepared for the digital age with Digital I/O connectors, S/PDIF and the
professional format AES/EBU. However, specifications never tell the whole story. What really
matters is how your final mix sounds. This is where TC?s long experience and know-how in high-end
studio signal processing becomes important.

More Features

250 factory presets, including Delay, Reverb, Ambience, Pitch, Dynamics, EQ + more.
True stereo Twin Engine processing with six different routings available.
Dynamic Morphing? and Patch Glide with adjustable glide times.
20bit Analog Conversion (105dB Dynamic Range A to D): 10Hz-20Khz bandwidth
AES/EBU (24bit) and SPDIF (24bit) digital I/O. + 16bit dithering tool for DAT output.
Wizard Help menus assist user in preset choices on an easy to read scrolling bit-mapped display.
Tap tempo and MIDI tempo Delay presets. Tap tempo button and footswitch jack.
Both 128 user and 128 Combi-user presets + 4 snapshot memories.
Universal auto-switching power supply (100-240V.)

Outline FSC1 Processor-2nd Hand- FEATURING Customized functions FOC1 dedicated controller for Flyone loudspeaker system SC1 dedicated controller for Spectra loudspeaker system NC1 dedicated controller for Integra loudspeaker system MEC1 dedicated controller for Media loudspeaker system FSC1 dedicated controller for Formula Stack louds. System TFC1 dedicated controller tor Topfly loudspeaker system MRC1 dedicated controller for Road loudspeaker system TLC1 : dedicated controller for Tripla loudspeaker system Dynamically invariant filter transfer function RMS limiters on each output Subwoofer dedicated output Adjustable band gain Polarity inversion switches Muting switches   DESCRIPTION Designed with the most advanced audio technologies the Outline Controller Series are true professional active dedicated control units for some Outline loudspeaker system models. Developed to meet the most demanding requirements of the sound reinforcement applications, the Outline Controller Series provides nonstop operation with absolute stability and reliability. Only IEC approved components and parts are used in these active controllers and they are manufactured to satisfy and to be in according with safety objects stated for “electrical device” working within the limits of pertinent CE, European Community directive. Based on a plugin filter card design, the Outline Controller Series allows the operation to those Outline loudspeaker systems that needs this kind of external assistance to perform of its best. The Outline FOC1, SC1, MEC1, NC1 two ways with subbass output controllers, are designed for the Outline Flyone, Spectra, Media, Integra loudspeaker system. The Outline FSC1, TFC1, MRC1, TLC1, three ways with subbass output are designed for the Outline FormulaStack, TopFly, RoadSystem, Tripla loudspeaker system. All models have customized band splitting, filter transfer function and signal time alignment tailored to the loudspeaker system for which are designed. All models have dynamic control with loudspeaker protection purposes, obtained with RMS limiters with adjustable threshold that are available on each output. All models have a very low frequency output that can be used to drive the Outline Bass Series or Sub Series low frequency units. All models have level control on each output, polarity inverters, muting switches, subsonic filters, RMS limiters and active balanced input and outputs with XLR connectors. Perspex security cover are included. Dimensions of all models are 483mm width, 44mm height, 210mm depth. SPECIFICATIONS Product name: Outline FOCI, SC1, NCI, MEC1, FSC1, TFC1, MRC1, TLC1 Product type: Dedicated active controller Channels: 1 Ways: FOCI: 2 ways + subwoofer SC1: 2 ways + subwoofer NCI: 2 ways + subwoofer MEC1 : 2 ways + subwoofer FSC1: 3 ways + subwoofer TFC1: 3 ways + subwoofer MRC1: 3 ways + subwoofer TLC1: 3 ways + subwoofer Crossover frequencies: fixed customized Filter slope: fixed customized Filter transfer function: fixed customized Input impedance: 20 kΩ balanced Frequency response: 20-20000 Hz ± 0.3 dB Output impedance: 600Ω balanced Total harmonic distortion (THD): <0.01% Total intermodulation distortion (SMPTE): <0.01% Signal to noise ratio: > 100dBA Subsonic filter: Butterworth 18 Hz, 18 dB octave Controls: Front panel: Power on, output level, polarity, output mute, limiting threshold, input gain adjust Rear panel switches: Balanced/unbalanced input and outputs, limiters on Display: Front panel: Power on, signal present, limiting action, input overloading Connectors: XLR, Pin 1 ground, Pin 2 hot, Pin 3 cold Power supply: AC from 100 -to 240V/50-60 Hz Power consumption: 20W Dimensions and net weight: Front panel Standard EIA 19" 1 U 483mm width, 44mm height, 210 mm depth, all models 3.3 net weight. Dimensions volume and gross weight: all models, 55cm width, 8cm height, 30cm depth, volume 0.01 m3, 4.3 gross weight.  
Weight2.00 kg8.00 kg3.00 kg3.00 kg3.00 kg7.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 8.00 kg
Weight 3.00 kg
Weight 3.00 kg
Weight 3.00 kg
Weight 7.00 kg