DBX 166XL Compressor / Limiter / Gate USED (Made in USA)

Discontinued

99.00

Out of stock

CompareAdd to wishlist Submit Better Price
PRICE DOES NOT INCLUDE VAT Features Goof proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expander/gates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate […]

 

Read more

PRICE DOES NOT INCLUDE VAT
Features

  • Goof proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
  • New gate timing algorithms ensure the smoothest release characteristics
  • Program-adaptive expander/gates
  • Great sounding dynamics control for any type of program material
  • Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
  • Stereo or dual-mode operation
  • Balanced inputs and outputs on 1/4″ TRS and XLR
  • Side Chain insert
  • Classic dbx® “Auto” mode

 

Specifications

Input Connectors 1/4″ TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot HI
Input Impedance >50kΩ balanced, >25kΩ unbalanced
Max Input +24dBu, Balanced or Unbalanced
CMRR >40dB at 1kHz, typically >55dB
Sidechain 1/4″ TRS Phone, Normalled: Ring = Output (send); tip = Input (return)
Sidechain Impedance Tip = >10kΩ (Input), Ring = 2kΩ (Output)
Sidechain Max Input Level +24dBu
Output Connectors 1/4″ TRS phone and XLR floating balanced, XLR: Pin 2 and Tip Hi
Output Impedance 120Ω balanced, 60Ω unbalanced
Max Output +21dBu,>+20 dBm into 600Ω, balanced or unbalanced
Frequency Response 20Hz – 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain
Noise
Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “DBX 166XL Compressor / Limiter / Gate USED (Made in USA)”

Your email address will not be published. Required fields are marked *

Quick Comparison

DBX 166XL Compressor / Limiter / Gate USED (Made in USA) removeSAMSON S-COM 4 Four Channel Compressor-Gate Processor (USED) removeTC ELECTRONIC M-2000 STUDIO EFFECTS PROCESSOR(USED) Made in Denmark removeAKG N63E Phantom Power Supply USED removeGepco Passive D.I. Box USED removeBSS FDS-334 MINIDRIVE LOUDSPEAKER MANAGEMENT SYSTEM 2IN/4OUT -USED- remove
NameDBX 166XL Compressor / Limiter / Gate USED (Made in USA) removeSAMSON S-COM 4 Four Channel Compressor-Gate Processor (USED) removeTC ELECTRONIC M-2000 STUDIO EFFECTS PROCESSOR(USED) Made in Denmark removeAKG N63E Phantom Power Supply USED removeGepco Passive D.I. Box USED removeBSS FDS-334 MINIDRIVE LOUDSPEAKER MANAGEMENT SYSTEM 2IN/4OUT -USED- remove
Image
SKUDBX 166XLSCOM 4 USEDM2000N63EGEPCOFDS-334
Rating
Price99.00 80.00 300.0080.0019.00 480.00
Stock

Out of stock

Available on backorder

Only 1 left in stock

Only 1 left in stock

Only 1 left in stock

Only 1 left in stock

AvailabilityOut of stockAvailable on backorderOnly 1 left in stockOnly 1 left in stockOnly 1 left in stockOnly 1 left in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PRICE DOES NOT INCLUDE VAT
Features

  • Goof proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
  • New gate timing algorithms ensure the smoothest release characteristics
  • Program-adaptive expander/gates
  • Great sounding dynamics control for any type of program material
  • Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
  • Stereo or dual-mode operation
  • Balanced inputs and outputs on 1/4" TRS and XLR
  • Side Chain insert
  • Classic dbx® "Auto" mode
  Specifications
Input Connectors 1/4" TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot HI
Input Impedance >50kΩ balanced, >25kΩ unbalanced
Max Input +24dBu, Balanced or Unbalanced
CMRR >40dB at 1kHz, typically >55dB
Sidechain 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return)
Sidechain Impedance Tip = >10kΩ (Input), Ring = 2kΩ (Output)
Sidechain Max Input Level +24dBu
Output Connectors 1/4" TRS phone and XLR floating balanced, XLR: Pin 2 and Tip Hi
Output Impedance 120Ω balanced, 60Ω unbalanced
Max Output +21dBu,>+20 dBm into 600Ω, balanced or unbalanced
Frequency Response 20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain
Noise

USED IN GOOD CONDITION.

Price does not include vat

The S com 4 is a compact and versatile single-rack space device that provides
four channels of high quality dynamics processing with an Expander/Gate and
Compressor/Limiter on each channel.
The four channels operate independently or in stereo pairs. Its multi-segment LED
metering displays input/output level as well as gain reduction. The Expander/Gate
section features a continuously variable Threshold control as well as a switch for
fast or slow release times.
The Compressor/Limiter section includes variable Threshold, Ratio and Output levels.
S com 4\'s Enhancer switch restores high frequencies that are sometimes diminished
by heavy compression. This wide-ranging combination of features makes the S com
4 an efficient and versatile audio tool for a wide variety of applications. Its clean and
quiet audio characteristics make it ideal where high sonic integrity is imperative. 
 
FEATURES:

4 Channel Compressor/Limiter, Expander/Gate with Enhancer
Linkable in two Stereo pairs
Expander/Gate with variable Trigger control and switchable Fast/Slow Release
5 Segment LED meters for Input/Output levels and Gain Reduction on each channel
Advanced circuit design utilizing Low Noise Operational
Amplifiers and High Quality VCA\'s
Servo Balanced Inputs and Outputs on XLR and 1/4" connectors
SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee
based on the level of Input signal applied
Individual Threshold and Ratio controls on each channel
Three-year extended warranty 

PRICE DOES NOT INCLUDE VAT

 

Art + Science = Magic

The Engineering Group at TC Electronic were given carte blanche to create the optimal studio
signal processor. Being musicians and studio engineers themselves, they know what is important
and have a feel for what you are looking for. Working on the borderline between art and science,
they created the M2000.
Designed for the artist within you, you will create magic when using the M2000.

Main features  

Magic
The M2000 provides you with a broad palette of high quality effects enabling you to
create magical effects. The true dual engine configuration allows you to run two full-
blown effects simultaneously, i.e. on two individual effects sends. The effects have
been developed for optimal sonic quality with no compromises made. This has only
been possible because our engineers succeeded in combining the latest technology
with TC's powerful DARC? chip.

Ultimate User-Interface
The user-friendly TC feature, the Recall Wizard, instantly finds the preset that suits
your need in any situation. You simply enter your preferences, such as gentle reverb
for vocal, or extra pitch for guitar and the Wizard serves you a short list of presets ready
to compare and use.

Uncompromising Effects
The M2000 gives you access to a stunning array of Reverb, Pitch-shifting, Delays, Chorus,
Dynamics etc. Among the included reverbs you?ll find the unique Co-efficient Optimized
Room Emulator or C.O.R.E. Reverb? based upon TC?s famous reverberation Technology.
Another unique feature in the M2000 is the Dynamic Morphing. This function enables you to
apply e.g. Chorus to a vocal at low volume levels, while the same effect is being morphed into
flanging at high levels giving the signal a totally new dynamic dimension.

The Sensation
The M2000 is fully prepared for the digital age with Digital I/O connectors, S/PDIF and the
professional format AES/EBU. However, specifications never tell the whole story. What really
matters is how your final mix sounds. This is where TC?s long experience and know-how in high-end
studio signal processing becomes important.

More Features

250 factory presets, including Delay, Reverb, Ambience, Pitch, Dynamics, EQ + more.
True stereo Twin Engine processing with six different routings available.
Dynamic Morphing? and Patch Glide with adjustable glide times.
20bit Analog Conversion (105dB Dynamic Range A to D): 10Hz-20Khz bandwidth
AES/EBU (24bit) and SPDIF (24bit) digital I/O. + 16bit dithering tool for DAT output.
Wizard Help menus assist user in preset choices on an easy to read scrolling bit-mapped display.
Tap tempo and MIDI tempo Delay presets. Tap tempo button and footswitch jack.
Both 128 user and 128 Combi-user presets + 4 snapshot memories.
Universal auto-switching power supply (100-240V.)

PRICE DOES NOT INCLUDE VAT

AKG N63E Phantom Power Supply

PRICE DOES NOT INCLUDE VAT

Gepco Passive D.I. Box-2nd Hand-

PRICE WITHOUT V.A.T.

The BSS FDS-334T is a 2 input / 4 output loudspeaker management system with
Features such as : Fast-access edit input and output, Each output is assignable
to either input or to sum of inputs, Navipad menu navigation, Bright blue text display,
Crossover, assignable PEQ mid-filter limiters, polarity and delay on each output,
Assignable parametric EQ and delay on each input, LED bargraphs on every input
and output, 6, 12, 18, 24 or 48dB per octave Butterworth, Bessel or Linkwitz crossover
alignments, 60 user programs, Lockable front panel mutes and level trims and MIDI control.

 

Weight2.50 kg3.40 kg3.00 kg2.00 kg0.50 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 3.40 kg
Weight 3.00 kg
Weight 2.00 kg
Weight 0.50 kg
Weight 3.00 kg