| Content |
The MZU 2008 switching unit can be installed in 19” racks for selective voice/music switching in 8 audio zones, with the
possibility to increase the number of zones as multiple of 8, adding other MZU 2008 in cascade. Selection of the zones in which the music is to be interrupted and an announcement transmitted is carried out from the MBT 8008 control console.
Using the 8 "MUSIC” keys on the front panel, you can choose in which of the 8 audio zones to play the normal background
music and in which zones no music is to be played. The system can be configured in one of the following ways:
• a) the 2 inputs of the unit are driven by two amplifiers, one of which is dedicated to voice transmission and the other to music transmission.
The 8 outputs of the unit drive the 8 speakers of the 8 audio zones.
• b) the 2 inputs of the unit are driven by two signal preamplifiers, one of which is dedicated to voice transmission and the other to music transmission. The 8 outputs of the unit drive the 8 power amplifiers dedicated to sound diffusion in the 8 audio zones.
|
Code
|
12944
|
|
Characteristics
|
1 rack unit with frame with RAL 7035 light grey paint finish
|
|
Inputs
|
2 music inputs with two wires, speech with three wires, one of which is used for emergencies (for amplifiers)
|
|
Outputs for loudspeaker line (zones)
|
8 with three wires, one of which is used for Emergencies
|
|
Max. applicable power
|
1200 Watt/100 V, 840 Watt/70V, 600 Watt/50V, 300 Watt/25V
|
|
Controls
|
Speech key for each zone. Music key for each zone. General call key. Power ON-OFF key
|
|
Remote controls
|
Zone selection control. General call command. Activation of emergency and OPEN COLLECTOR output
|
|
Output power supply
|
Power supply +15/0/-15 VDC
|
|
Luminous indicators
|
Speech Led and Music Led per zone. General call indicator led. Emergency indicator led. Power ON-OFF indicator led
|
|
VAC Power supply
|
230 VAC with external power supply unit
120 VAC with external power supply unit
|
|
Optional accessories
|
MBT 8008 microphone base
|
|
Wireless 5.8 GHz Stereo Receiver
- For wireless transmission of a stereo audio signal together with the
- Maximum range: 30 m
- One transmitter can be paired with up to 8 receivers
- Outputs: 2x XLR male or 2x 6.3 mm jack (unbalanced)
- Volume control
- Dimensions without antenna (L x W x H ): 110 x 105 x 45 mm
- Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
|
Κάρτα 4άρων εισόδων για BLU-800, BLU-320, BLU-160 & BLU-120 με δυνατότητα Echo cancellation. | WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
| Power Supply |
AC 9V-500 mA 50/60 Hz |
| Frequency |
2404-2476MHz |
| Channel |
25 |
| Modulation/Demodulation |
GFSK |
| Receive Sensitivity (WDR 24) |
-84dBm (min.) |
| Transmitted Power (WDT 24) |
6 dBm |
| Output Level (WDR 24) |
+13dBu (BAL max.) |
| Input Level (WDT 24) |
+5dBu (max.) |
| Bandwidth |
>=1.8 MHz |
| Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
| S/N |
>80 dB |
| Dynamic Range @ 1 kHz |
>90 dB |
| Crosstalk @ 1kHz |
>90 dB |
| THD |
|
|
For decades, dbx’s patented Subharmonic Synthesis has rattled foundations enhancing the bass in a variety of professional applications including nightclub and DJ mixing, theatre and film sound, music recording, live music performance and broadcasting. dbx’s Subharmonic Synthesis process actually produces a new, Waveform Modeled bass note, exactly an octave below the bass in the original audio.
The dbx 510 answers the call of audio professionals everywhere delivering Subharmonic Synthesis in the convenient design of a 500 Series module. The 510’s two separate bands of subharmonic synthesis provide the best combination of smoothness and control, while the independent Low Frequency Boost circuit is designed to get the most out of high-performance, low frequency speaker systems. Unlike other attempts at bass synthesis, the dbx process produces musical low frequencies that don’t interfere with mid and high-band information, even when the maximum synthesis and boost are applied. The result is a low-end punch that people really feel!
Put some boom in your room with the dbx 510! |
Product Features:
16-channel digital stereo mixer to create your personal monitor mix
Ultra-intuitive \"analog\" operation with total recall and 16 presets for custom mixes
State-of-the-art 24-bit D/A converters for premium audio quality
16 Channel Select buttons with dual LEDs for perfect overview
Level and Pan/Spread control per channel with LED meter
3-band EQ per channel with mid-band frequency control
Solo and Mute functions per channel
Global Level and EQ controls plus Panic Mute function
High power and \"drummer proof\" headphones output
Fully adjustable limiter protects your ears and headphones
Additional mono/stereo line output to connect your powered monitor
MIDI IN port for real-time remote control of all channels by external MIDI device such as BEHRINGER BCF2000, BCR2000, etc.
Standard CAT5e connection delivers power and 16 signals to each Personal Mixers
ULTRANET connector to daisy-chain up to forty-eight P16-M mixers for large systems (in conjunction with P16-D)
Ultra-low system latency of less than 1 millisecond
Powered via external power supply (included) or P16-I / P16-D
Mounts easily on a mic stand with the P16-MB mic stand mount (not included)
Extremely rugged construction ensures long life even under the most demanding conditions
Conceived and designed by BEHRINGER Germany
User\'s Manual |
Reviews
There are no reviews yet.