Content |
The MZU 2008 switching unit can be installed in 19” racks for selective voice/music switching in 8 audio zones, with the possibility to increase the number of zones as multiple of 8, adding other MZU 2008 in cascade. Selection of the zones in which the music is to be interrupted and an announcement transmitted is carried out from the MBT 8008 control console. Using the 8 "MUSIC” keys on the front panel, you can choose in which of the 8 audio zones to play the normal background music and in which zones no music is to be played. The system can be configured in one of the following ways: • a) the 2 inputs of the unit are driven by two amplifiers, one of which is dedicated to voice transmission and the other to music transmission. The 8 outputs of the unit drive the 8 speakers of the 8 audio zones. • b) the 2 inputs of the unit are driven by two signal preamplifiers, one of which is dedicated to voice transmission and the other to music transmission. The 8 outputs of the unit drive the 8 power amplifiers dedicated to sound diffusion in the 8 audio zones.
Code
|
12944
|
Characteristics
|
1 rack unit with frame with RAL 7035 light grey paint finish
|
Inputs
|
2 music inputs with two wires, speech with three wires, one of which is used for emergencies (for amplifiers)
|
Outputs for loudspeaker line (zones)
|
8 with three wires, one of which is used for Emergencies
|
Max. applicable power
|
1200 Watt/100 V, 840 Watt/70V, 600 Watt/50V, 300 Watt/25V
|
Controls
|
Speech key for each zone. Music key for each zone. General call key. Power ON-OFF key
|
Remote controls
|
Zone selection control. General call command. Activation of emergency and OPEN COLLECTOR output
|
Output power supply
|
Power supply +15/0/-15 VDC
|
Luminous indicators
|
Speech Led and Music Led per zone. General call indicator led. Emergency indicator led. Power ON-OFF indicator led
|
VAC Power supply
|
230 VAC with external power supply unit
120 VAC with external power supply unit
|
Optional accessories
|
MBT 8008 microphone base
|
|
The dbx 580 Microphone Preamp is the perfect partner to your microphones, providing sonically-transparent gain that will reveal the detail and audio signature of even the most esoteric microphones. It will transform their low level output signal to a high level, high current output for direct connection to the line level inputs of your mixer, sampler or any other recording medium that accepts line level, analog input. |
Product Features: 16-channel digital stereo mixer to create your personal monitor mix Ultra-intuitive \"analog\" operation with total recall and 16 presets for custom mixes State-of-the-art 24-bit D/A converters for premium audio quality 16 Channel Select buttons with dual LEDs for perfect overview Level and Pan/Spread control per channel with LED meter 3-band EQ per channel with mid-band frequency control Solo and Mute functions per channel Global Level and EQ controls plus Panic Mute function High power and \"drummer proof\" headphones output Fully adjustable limiter protects your ears and headphones Additional mono/stereo line output to connect your powered monitor MIDI IN port for real-time remote control of all channels by external MIDI device such as BEHRINGER BCF2000, BCR2000, etc. Standard CAT5e connection delivers power and 16 signals to each Personal Mixers ULTRANET connector to daisy-chain up to forty-eight P16-M mixers for large systems (in conjunction with P16-D) Ultra-low system latency of less than 1 millisecond Powered via external power supply (included) or P16-I / P16-D Mounts easily on a mic stand with the P16-MB mic stand mount (not included) Extremely rugged construction ensures long life even under the most demanding conditions Conceived and designed by BEHRINGER Germany
User\'s Manual | WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
Power Supply |
AC 9V-500 mA 50/60 Hz |
Frequency |
2404-2476MHz |
Channel |
25 |
Modulation/Demodulation |
GFSK |
Receive Sensitivity (WDR 24) |
-84dBm (min.) |
Transmitted Power (WDT 24) |
6 dBm |
Output Level (WDR 24) |
+13dBu (BAL max.) |
Input Level (WDT 24) |
+5dBu (max.) |
Bandwidth |
>=1.8 MHz |
Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
S/N |
>80 dB |
Dynamic Range @ 1 kHz |
>90 dB |
Crosstalk @ 1kHz |
>90 dB |
THD |
|
|
The Soundweb London BLU-102 offers a fixed configuration of 10 analog inputs and 8 analog outputs, an analog telephone interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.
The RJ-11 port enables the BLU-102 to interface with a standard POTS (aka PSTN or Analog PBX) telephone network.
The BLU-102 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.
The BLU-102 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.
Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.
This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
The BLU-102 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.
Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.
Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-102 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-102 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Key Features:
• 10 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• RJ-11 Telephone Input/Output Port
• Configurable Signal Processing
• 8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect |
INPUT: 4 balanced +4dBu/50kΩ on female XLR connectors; 4 unbalanced 1Vpp/50kΩ on RCA connectors.
OUTPUT: 4 unbalanced 1Vpp/49Ω on RCA connectors; 4 balanced +4dBu/49Ω on male XLR connectors.
MAX. OUTPUT: 18Vpp.
BANDWIDTH (-3dB): 30kHz.
S/N RATIO: Better than 89dB.
THD: Less than 0.02%.
POWER SOURCE: 115-230V AC, 50/60Hz, 3.7VA.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 2.4kg (5.3lbs) approx.
ACCESSORIES: Power cord. |
Reviews
There are no reviews yet.