Content |
Get legendary sound quality with the EON208P all-in-one portable PA system, complete with an 8-channel mixer and Bluetooth audio. With a convenient suitcase-style design, the EON208P makes it easy to get great sound for performances, meetings and events. The 8-channel detachable mixer provides professional connections for mics, instruments and line-level sources, while the 8? two-way stereo speakers deliver best-in-class audience coverage. Bluetooth connectivity also allows you to stream audio from your mobile device. With 300 watts, youʼll have more than enough volume to be heard. Plus, the compact and lightweight form factor means you can carry the entire system with one hand. |
Although we refer to it as a "column” loudspeaker, the INSPIRE iP2000 delivers the powerful, high-quality sound and optimised dispersion inspired by our award-winning line array products – in a surprisingly lightweight and easy to use, allin-one form factor. Thanks to an on-board 3-channel digital mixer and multichannel 1,000-Watt Class-D amplifi er driving a customengineered 12" subwoofer, 16 x 2.75" neodymium drivers, and a horn loaded super tweeter, the iP2000 is ideally-suited for small to mediumsized performance venues, houses of worship, boardroom presentations, nightclubs, and much more. The iP2000 is lightweight: only 30.7 kg (67.7 lbs) and features industryleading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifi er and Spatial Sound technologies – plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control.
Manufacturer |
TURBOSOUND |
Application |
Installation, Portable PA |
Speaker Type |
Active |
Speaker Category |
Satellite (full range) |
Color |
Μαύρο |
DSP |
Yes |
Speaker Material |
Wooden Cabin |
Speaker Power (Watt) |
1000 |
Weight (kg) |
30,9 |
Woofer (inches) |
12 |
Tweeter / Driver (inches) |
16 x 2,75 - 1 |
dB (max spl) |
123 |
Frequency Response (Hz) |
38-20000 |
Series |
iNSPIRE series |
Model |
iNSPIRE iP2000 |
Part Number |
000-BKX |
Warranty |
3 Years Warranty |
|
- All-in-one column speaker for PA and monitor applications
- 1,000 watts peak Class-D system power offer high performance with a low weight
- Powerful bass reproduction with 3 x 6.5" woofers
- Balanced mids thanks to the 8 x 3" full-range speakers
- Precise and silky highs with 2 x 1" high frequency drivers
- Increased range and wider coverage through the array arrangement
- Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
- Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
- Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
- Two-piece column for compact transport
- Secure plug-and-play connection thanks to the wireless multi-pin mechanism
- A wide range of application options through dismountable columns
- Easy operation with presets for mono or stereo configuration
- Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 11 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as a PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed after years of experience in the design of the column systems as a user-friendly solution for small to medium-sized gigs and fixed installations.
The MAUI 11 G2 is equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier boasting 1,000 watts of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way-crossover with run time correction.
The design of the MAUI 11 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer or DJ, you will be thrilled with the extraordinary sound and portability of the MAUI 11 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 11 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
124 dB
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2030 mm
Weight
24,9 kg
Woofer characteristics
Low/mid driver dimensions
3 x 6.5 "
Woofer size
3 x 165.1 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
1.5 "
Woofer voice coil (mm)
38.1 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
285 mm
Subwoofer height
650 mm
Subwoofer depth
373 mm
Subwoofer weight
16.9 kg
Mid/Hi System
Midrange size
8 x 3 "
Midrange size
8 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
620 / 730 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.4 / 2.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
1000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line inputs
2 x stereo
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
1 x direct out
Line output connectors
XLR
Mic inputs
1
Mic inputs
XLR/6.3 mm jack
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
| LD Systems STINGER G3 GALA SET 2 x double 8" passive PA Speaker + 2 x 18" passive Subwoofer + Amping Rack
Including a pair of slim, low-profile satellites and two subwoofers, this set is a great option for events that require excellent speech intelligibility and extended coverage. We recommend this set for the following type of application: gala events, corporate conferences. The STINGER G3 GALA SET is suitable for audiences of up to 350* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 28 G3 – 28” Passive loudspeaker
2 x STINGER SUB 18 G3 – 18” Passive subwoofer
1 x DSP 45K RACK – Power amplifier with DSP
2 x STINGER 28 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
General
Product type |
PA system |
Type |
Passiv |
System output (RMS): |
2.400 W |
Frequency response |
35 - 20,000 Hz |
Dispersion (H x V) |
90 x 50° |
Weight |
156 kg |
LD Systems DSP 45 K RACK 4-Channel DSP Power Amplifier and Patchbay in 19" Rack Case
Product type |
PA Complete Systems Accessories |
Material |
birch multiplex |
Type |
castor boards |
Material thickness |
15 mm |
Surface |
Polyurea |
Color |
Black |
Number of casters |
4 |
Wheel diameter |
100 mm |
Manufacturer of castors |
Adam Hall |
number of drag castors |
2 |
Length |
650 mm |
Width |
540 mm |
Weight |
7 kg |
LD Systems STINGER SUB 18 G3 PC Padded protective Cover for Stinger® G3 Subwoofer 18"
Product type |
PA loudspeaker |
Type |
Passive |
Low/mid driver dimensions |
2 x 8 " |
Woofer size |
2 x 203.2 mm |
Woofer magnet |
Ferrite |
Woofer brand |
Custom-made |
Woofer voice coil |
2 " |
Woofer voice coil (mm) |
50.8 mm |
Horn |
BEM optimized CD Horn |
HF driver dimensions |
1 " |
HF driver size |
25.4 mm |
HF driver magnet |
Ferrite |
HF driver brand |
BMS |
HF driver voice coil |
1 " |
HF driver voice coil |
25.4 mm |
Dispersion (H x V) |
90 x 50 ° |
Load rating (RMS) |
400 W |
Peak power |
800 W |
Frequency response |
58 - 20000 Hz |
SPL (1W/1m) |
99 dB |
Max. SPL |
125 dB |
Impedance |
8 Ohm(s) |
Protection circuits |
HF Driver |
Speakers per amplifier channel (DSP44/45K) |
3 |
Cabinet material |
12 mm Plywood |
Width |
270 mm |
Height |
756 mm |
Depth |
290 mm |
Weight |
19,3 kg |
LD Systems STINGER SUB 18 G3 CB Dolly Board for Stinger G3 Subwoofer 18" Models
Product type |
PA subwoofer |
Low/mid driver dimensions |
18 " |
Woofer size |
457.2 mm |
Woofer magnet |
Ferrite |
Woofer voice coil |
4 " |
Woofer voice coil (mm) |
101.6 mm |
Impedance |
8 Ohm(s) |
Loudspeaker inputs |
1 |
Load rating (RMS) |
800 W |
Speaker input connections |
Speakon compatible |
Loudspeaker outputs |
1 |
Speaker output connections |
Speakon compatible |
Peak power |
1600 W |
Frequency response |
35 - Crossover Hz |
Cabinet surface |
Polyurea |
Cabinet construction |
Bass Reflex |
SPL (1W/1m) |
100 dB |
Max. SPL |
129 dB |
Depth |
740 mm |
Speakers per amplifier channel (DSP44/45K) |
2 |
Cabinet material |
18 mm Plywood |
Width |
677 mm |
Height |
547 mm |
Weight |
40,6 kg |
LD Systems STINGER 28 G3 Passive 2 x 8" 2-way bass-reflex PA Loudspeaker
Product type |
PA Subwoofer Accessories |
Color |
Black |
Material |
Nylon 1680D |
Type |
Covers |
Thickness of the padding |
8 mm |
Depth |
625 mm |
Width |
567 mm |
Height |
470 mm |
Weight |
1,5 kg |
LD Systems STINGER SUB 18 G3 18” Passive Bass Reflex PA Subwoofer
Product type |
Power Amplifiers |
Type |
19" / 3 HE |
Weight |
17,9 kg |
LD Systems STINGER 28 G3 PC Padded protective Cover for Stinger® G3 PA Loudspeaker 2 x 8"
Product type |
Protective cover |
Material |
Nylon 1680D |
Height |
750 mm |
Width |
290 mm |
Depth |
310 mm |
Weight |
0,65 kg |
| Delivering a massive low-end with punch and clarity, this set is ideal for outdoor sound reinforcement. With a quartet of subwoofers and two 15” tops, it easily covers medium-sized gigs at town fairs, street festivals and in marquees. We recommend this set for the following type of application: DJ, outdoor sound reinforcement for bands. The STINGER G3 IMPACT SET A is suitable for audiences of up to 400* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 15 A G3 – 15” Powered loudspeaker
4 x STINGER SUB 18 A G3 – 18” Powered subwoofer
2 x STINGER 15 G3 PC – Padded protective cover for loudspeaker
4 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
4 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
Specifications
General
System output (RMS):
3,400 W
Frequency response
35 – 20,000 Hz
Dispersion (H x V)
90 x 50°
Items in this set
LD Systems STINGER SUB 18 G3 PC Padded protective Cover for Stinger® G3 Subwoofer 18"
Product type
PA Subwoofer Accessories
Thickness of the padding
8 mm
LD Systems STINGER SUB 18 G3 CB Dolly Board for Stinger G3 Subwoofer 18" Models
Product type
PA Complete Systems Accessories
Manufacturer of castors
Adam Hall
LD Systems STINGER 15 A G3 Active 15" 2-way bass-reflex PA Loudspeaker
Product type
PA loudspeaker
Low/mid driver dimensions
15 "
Woofer voice coil (mm)
76.2 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
50 - 20000 Hz
Protection circuits
Multiband limiter, over-current, thermal overload
Controls
2 x gain, 2 x Mic/Line
Line input connectors
6.3 mm jack, XLR
Operating voltage
Switching power supply
Cabinet material
15 mm Plywood
LD Systems STINGER 15 G3 PC Padded protective Cover for Stinger® G3 PA Loudspeaker 15"
Product type
PA Loudspeakers Accessories
LD Systems STINGER SUB 18 A G3 Active 18" bass-reflex PA subwoofer
Product type
PA subwoofer
Low/mid driver dimensions
18 "
Woofer voice coil (mm)
101.6 mm
Input impedance
30000 Ohm(s)
Frequency response
35 - Low-Pass Hz
Line input connectors
6.3 mm jack, XLR
Line output connectors
XLR
Protection circuits
DC, limiter, over voltage, short circuit
Power consumption (max.)
600 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet construction
Bass Reflex
Controls
Main level, Mode
Indicators
Limit, Mode, On, Protect (protection circuit engaged), Signal
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), SMPS
Cabinet material
18 mm Plywood
| 1000W, portable PA system with 5 channel digital mixer, 12" subwoofer, 10 x 1.5" driver line array speaker, Bluetooth input, SPX digital reverbs, 1knob EQ and multi-band compressor for master output.
- 1000W (HF:190W+LF:810W) Class-D power output
- Best in class 12" subwoofer
- 10x 1.5" drivers for slim line array speaker
- Digital mixer (3 mono mic/line + 1 stereo line)
- Multi-band compressor "mode" for master output
- 1-knob EQ for per channel
- High resolution SPX digital reverbs (4types, parameter control)
- 2x Hi-Z (high impedance) inputs
- Link out and monitor out
- Dedicated cover included
- Optional reverb foot switch
- Optional dolly for more portability
Power:1000W
Dimensions: |
System: 334 x 2,000 x 418 mm (maximum) |
(Console): |
1000W (Powered subwoofer: 810W, Line array speaker : 190W) |
Inputs/Outputs: |
3 mono mic/line + 1 stereo line/2 mono line / 1 Link out, 1 Monitior out |
Equalizer: |
multi band EQ |
Dimensions: |
System: 334 x 2,000 x 418 mm (maximum), |
|
Reviews
There are no reviews yet.