FBT PSR-212M 600W RMS PASSIVE FLOOR MONITOR

Discontinued

1,058.53 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Product Description The FBT PSR 212m floor monitor features 13 ply Baltic Birch plywood construction cabinetry in a low profile design, internally braced to prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the cabinetsʼ exterior. A heavy duty perforated steel grille provides protection for the coaxial speaker. An integrated […]

 

Read more

Product Description
The FBT PSR 212m floor monitor features 13 ply Baltic Birch plywood construction cabinetry in a low profile design, internally braced to
prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the cabinetsʼ exterior.
A heavy duty perforated steel grille provides protection for the coaxial speaker. An integrated carrying handle is built into the cabinet
providing easy transportability.
The FBT PSR 212 is of two-way bass reflex design incorporating a Italian manufactured 12” B&C Custom coaxial woofer with a 3” voice coil
with aluminum windings and a concentric 2.6” B&C titanium compression driver with a 1.4” exit. The PSR 212m floor monitors dispersion
factor is 80° x 80°. The internal crossover is constructed with a military grade dual flooded fiberglass circuit board utilizing military spec
components including metallized polyester condensers, and large diameter choke coils. All crossover components are embedded in a
special resin to ensure total imperviousness to vibrations in operation and shock transmitted by mechanical impacts when transporting. The
internal crossover allows either full range or bi amplified operation by means of a jumper located internally on the crossover unit on the
underside of the rear control panel input plate. This type of selectable crossover frequency design provides against accidental crossover
settings when either full range or bi amplified operation is desired. When used in full range operation, the internal crossover frequency is
preset at 1.6khz (24dB oct). Recommended amplifier power output when used in full range operation is 600w RMS total and 600 w RMS LF,
160 w RMS HF when operated in bi amp mode. A sensitivity factor of 99 dB applies in full range mode and 99 dB LF, 108 dB HF in bi amp
mode. Frequency response is an ample 60Hz – 18kHz.
The rear facing input panel provides 2 Neutrik® Speakon NL-4 female connectors. FBTʼs S.T.E.P.® (soft trip electronic protection) circuitry
ensures correct speaker operation even in overdriven conditions.


Specifications
System Type: 2 way Floor Monitor
Dispersion: 80° H x 80° V
Components: 12” B&C Coaxial woofer with concentric HF driver
Protection: FBT S.T.E.P.® Protection circuitry
Frequency Response: 60Hz – 18kHz
Inputs/Outputs: 2- Neutrik® Speakon
Nominal Impedance: 8 ohms
Cabinet Design: Asymmetrical
Power Handling: 600w RMS, 1200w Program (full range)
Enclosure Material: 13 ply Baltic Birch plywood
Sensitivity: 99 dB @ 1 watt, 1 meter (full range)
Dimensions: 21”w x 14.60” h x 20.80” d
Maximum SPL: 129dB (full range)
Net Weight: 55 lbs.
Internal Crossover Frequency: 1.6 kHz
Shipping Weight: 62 lbs.

Weight 25.00 kg

Reviews

There are no reviews yet.

Be the first to review “FBT PSR-212M 600W RMS PASSIVE FLOOR MONITOR”

Your email address will not be published. Required fields are marked *

Quick Comparison

FBT PSR-212M 600W RMS PASSIVE FLOOR MONITOR removeELECTRO VOICE XW12A 12'' 2 WAY STAGE MONITOR 675W removeJBL VRX915M 15'' 2-way 800W RMS Stage Monitor removeELECTRO VOICE TX1152FM 1 x 15" Floor Monitor, 100 dB, 500 W cont. Black removeAdamson 12 MX Professional monitor speaker 510W removeLD Systems MON 15 A G3 15" powered coaxial stage monitor remove
NameFBT PSR-212M 600W RMS PASSIVE FLOOR MONITOR removeELECTRO VOICE XW12A 12'' 2 WAY STAGE MONITOR 675W removeJBL VRX915M 15'' 2-way 800W RMS Stage Monitor removeELECTRO VOICE TX1152FM 1 x 15" Floor Monitor, 100 dB, 500 W cont. Black removeAdamson 12 MX Professional monitor speaker 510W removeLD Systems MON 15 A G3 15" powered coaxial stage monitor remove
ImageLDMON15AG3 Active Stage Monitor
SKUPSR-212M001964VRX 915M00440312 MXLDMON15AG3
Rating
Price1,058.53 incl. GR VAT2,082.00 incl. GR VAT 2,237.00 incl. GR VAT 1,018.00 incl. GR VAT 2,825.90 incl. GR VAT 699.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Product Description
The FBT PSR 212m floor monitor features 13 ply Baltic Birch plywood construction cabinetry in a low profile design, internally braced to
prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the cabinetsʼ exterior.
A heavy duty perforated steel grille provides protection for the coaxial speaker. An integrated carrying handle is built into the cabinet
providing easy transportability.
The FBT PSR 212 is of two-way bass reflex design incorporating a Italian manufactured 12” B&C Custom coaxial woofer with a 3” voice coil
with aluminum windings and a concentric 2.6” B&C titanium compression driver with a 1.4” exit. The PSR 212m floor monitors dispersion
factor is 80° x 80°. The internal crossover is constructed with a military grade dual flooded fiberglass circuit board utilizing military spec
components including metallized polyester condensers, and large diameter choke coils. All crossover components are embedded in a
special resin to ensure total imperviousness to vibrations in operation and shock transmitted by mechanical impacts when transporting. The
internal crossover allows either full range or bi amplified operation by means of a jumper located internally on the crossover unit on the
underside of the rear control panel input plate. This type of selectable crossover frequency design provides against accidental crossover
settings when either full range or bi amplified operation is desired. When used in full range operation, the internal crossover frequency is
preset at 1.6khz (24dB oct). Recommended amplifier power output when used in full range operation is 600w RMS total and 600 w RMS LF,
160 w RMS HF when operated in bi amp mode. A sensitivity factor of 99 dB applies in full range mode and 99 dB LF, 108 dB HF in bi amp
mode. Frequency response is an ample 60Hz – 18kHz.
The rear facing input panel provides 2 Neutrik® Speakon NL-4 female connectors. FBTʼs S.T.E.P.® (soft trip electronic protection) circuitry
ensures correct speaker operation even in overdriven conditions.


Specifications
System Type: 2 way Floor Monitor
Dispersion: 80° H x 80° V
Components: 12” B&C Coaxial woofer with concentric HF driver
Protection: FBT S.T.E.P.® Protection circuitry
Frequency Response: 60Hz - 18kHz
Inputs/Outputs: 2- Neutrik® Speakon
Nominal Impedance: 8 ohms
Cabinet Design: Asymmetrical
Power Handling: 600w RMS, 1200w Program (full range)
Enclosure Material: 13 ply Baltic Birch plywood
Sensitivity: 99 dB @ 1 watt, 1 meter (full range)
Dimensions: 21”w x 14.60” h x 20.80” d
Maximum SPL: 129dB (full range)
Net Weight: 55 lbs.
Internal Crossover Frequency: 1.6 kHz
Shipping Weight: 62 lbs.

Chassis Size    304.8 mm (12“)
Color    Black
Directivity Index    11.6 dB
Input Connections    2 four-pin Speakon
Speaker Type    Two-Way
Speaker Type    Wedges
Frequency Response (-3 dB)    65 - 16000 Hz
Frequency Response (-10 dB)    50 - 20000 Hz
Internal Crossover    No
Sensitivity 1 W/1 m    98 dB
Max. SPL/1m (calc)    129 dB
Coverage
(Nominal -6 dB) H°    55 °
Coverage
(Nominal -6 dB) V°    80 °
Rotatable Horn    No
LF Transducer    DL12ST
Low Frequency Power Handling (Continuous/Program/Peak)    300 Watts
High Frequency Power Handling (Continuous/Program/Peak)    75 Watts
LF Nominal Impedance    8 Ω
HF Transducer    ND6-16
HF Nominal Impedance    16 Ω
Minimum Impedance    8.2/10.5 Ω
Enclosure Material    13-ply birch plywood with Futura
Flying    No
Outdoor    No
Height    584 mm (22.99“)
Width    449 mm (17.68“)
Depth    313 mm (12.32“)
Weight Net    21.9 kg (48.28 lbs)

JBL VRX915M 15'' 2-way 800W RMS Stage Monitor

Key Features :
 
Compact and low-profile for minimal obstruction of audience sightlines

50 x 90 nominal coverage

Bi-amplified or full-range passive operation

Differential Drive woofer with neodymium magnet for high power capacity and very light weight

4" (voice coil) diameter compression driver with neodymium magnet

Specifications:

Frequency Range

:

60 Hz - 20 kHz

Frequency Response

:

70 Hz - 20 kHz

Coverage Pattern

:

50 x 90 nominal

Crossover Modes

:

Passive / Bi-amp

  Crossover Frequency

:

1.1 kHz

Power Rating2 (Continuous / Program / Peak)

:

Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs

System Maximum SPL

:

127 dB SPL continuous (133 dB SPL peak)

System Sensitivity (1w @ 1m

:

98 dB SPL

LF Driver

:

1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms

HF Driver


1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms


Nominal Impedance

:

8 ohms

Active Tunings

:

Tunings available at www.jblpro.com

Enclosure

:

Symmetrical stage monitor, 15/18 mm, plywood

Finish

:

Black DuraFlex finish

Grille

:

Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing

Input Connectors

:

Neutrik Speakon NL-4 (x2), one on each end

Dimensions (H x W x D)

:

629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)

Net Weight

:

21 kg (46.0 lb)

Color    Black
Input Connections    Parallel Neutrik® NL4
Speaker Type    Fullrange
Frequency Response (-3 dB)    65 - 20000 Hz
Frequency Response (-10 dB)    45 - 20000 Hz
Internal Crossover    Yes
Recommended High-Pass Frequency    45 Hz
Sensitivity 1 W/1 m    100 dB
Max. SPL/1m (calc)    133 dB
Coverage
(Nominal -6 dB) H°    90 °
Coverage
(Nominal -6 dB) V°    50 °
Rotatable Horn    No
System Power Handling (Continuous/Program/Peak)    500 Watts
LF Transducer    SMX2151
HF Transducer    DH3
Crossover Frequency    1750 Hz
Nominal Impedance (Passive)    8 Ω
Minimum Impedance    6.2 Ω
Enclosure Material    Plywood and MDF with EVCOAT
Flying    No
Height    475 mm (18.7“)
Width    439 mm (17.28“)
Depth    655 mm (25.79“)
Weight Net    23.5 kg (51.81 lbs)

Descriptions:

The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.

Applications:

Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate

FEATURES:

Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction

Weight: 35

Description

The MON 15 A G3 is part of an entirely newly developed family of powered stage monitors for high performance. The MON G3 Series incorporates the advanced technology and premium materials found in high-end monitors typically rented by professionals, making this quality available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. Besides this, the series offers a high-level of robustness, a comprehensive set of features and the elegant LD Systems design. A maximum sound pressure level of 129 dB and superior bass reproduction make the MON 15 A G3 the best choice for loud band stages, as a drum fill or for stand-alone use as a compact front PA without an additional subwoofer. For a 15" stage monitor, it is unusually compact and elegant, so despite its impressive performance data, it blends harmoniously into the stage set. Both the signal (XLR/jack combo) and the power connection (PowerCON compatible) can be looped through. This allows for elegant, tidy cabling in multi-monitor set-ups or for distributed sound reinforcement.
  • Compact high-performance stage monitor with top-of-the-range technologies
  • Class-D power amplifier with 300 W RMS/1200 W peak and 129 dB max. SPL
  • Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
  • 15" woofer with 3" voice coil
  • Optimised, practical radiation pattern due to 50° x 90° CD horn
  • DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
  • 3-band EQ, Notch filter, 4 application presets and delay function
  • PowerCON compatible loop-through professional power connection
  • 35 mm speaker stand flange for FOH applications
  • Durable Polyurea coating and heavy-duty front griller
General
Product type
Stage monitors
Type
Powered
Color
Black
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
122 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
129 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
58 - 18000 HZ
Frequency response (-10 dB)
48 - 20000 Hz
Crossover frequency
1300 Hz
Monitor angle
33°
Dispersion (H x V)
50° x 90°
Width
505 mm
Depth
517 mm
Height
340 mm
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Weight
23,15 kg
Low/mid woofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer type
Coaxial loudspeaker
Woofer voice coil
3 "
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Horn
CD Horn
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Amplifier
Class D
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Fuse
T4AL 250 V
Controls
On / off switch, Rotary/push encoder
Indicators
LC display
Operating voltage
SMPS
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
150 W
Power in / out
PowerCON compatible
Line inputs
2
Line input connectors
6.3 mm jack, XLR - combo
Line thru
2
Line through connector
XLR
Weight25.00 kg21.90 kg21.00 kg23.50 kg35.00 kg24 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 25.00 kg
Weight 21.90 kg
Weight 21.00 kg
Weight 23.50 kg
Weight 35.00 kg
Weight 24 kg