More sound to your amps and speakers The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you’ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world’s finest processors. The 234xs uses precision filters to separate the […]
The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you’ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world’s finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality XLR inputs and outputs.
XLR balanced ins and outs
Mode switches for mono 4-way or stereo 2-way/3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant
Input Connectors
XLR
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced >50k ohm, unbalanced >25k ohm
Max Input
>+22dBu balanced or unbalanced
CMRR
>40dB, typically >55dB at 1kHz
Output Connectors
XLR
Output Type
Impedance-balanaced/unbalanced, RF filtered
Output Impedance
Balanced 200 ohm, unbalanced 100 ohm
Max Output
>+21dBu balanced/unbalanced into 2k ohms or greater
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting)
Crossover Frequencies (Mono Mode)
Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz
Crossover Filter Type
Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch
Inverts the phase at the output, one switch per output.
x1 / x10 Switch
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch
Selects stereo/mono and 2/3/4-way operation
LF Sum Switch
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode.
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.
XLR balanced ins and outs
Mode switches for mono 4-way or stereo 2-way/3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant
Input Connectors
XLR
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced >50k ohm, unbalanced >25k ohm
Max Input
>+22dBu balanced or unbalanced
CMRR
>40dB, typically >55dB at 1kHz
Output Connectors
XLR
Output Type
Impedance-balanaced/unbalanced, RF filtered
Output Impedance
Balanced 200 ohm, unbalanced 100 ohm
Max Output
>+21dBu balanced/unbalanced into 2k ohms or greater
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting)
Crossover Frequencies (Mono Mode)
Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz
Crossover Filter Type
Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch
Inverts the phase at the output, one switch per output.
x1 / x10 Switch
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch
Selects stereo/mono and 2/3/4-way operation
LF Sum Switch
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode.
1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Unit Weight
4.0 lbs. (1.8 kg)
Shipping Weight
5.8 lbs. (2.6 kg)
The ARX EC-2 is a flexible yet affordable 24 dB per octave Phase Correct active crossovers. It has 2 modes of operation; as either Stereo 2 way or a Mono 3 way units, with a switch on the back panel selecting either mode.
Features Ultra low noise circuitry Totally phase aligned at crossover point Switchable Dual Channel 2 way or Single Channel 3 way Unique 'semi-fixed' crossover point 24dB per octave (Fourth Order) Linkwitz-Riley filters Separate Summed Mono Output Balanced Inputs and Outputs Built in High Pass filters Intuitive, 'user friendly' layout Flawless performance in any audio environment
Tamper-Proof Crossover Points The crossover points are determined internally by the value of 4 resistors per channel; changing the resistor value changes the crossover point. This 'semi fixed' method avoids the pitfalls of externally adjusted crossover points, making the crossover points tamper-proof once they are set. Idle fingers can't fiddle with the crossover points and create havoc with the system! As a handy guide, a list of common crossover points and their corresponding resistor values are printed inside the unit's lid, and also set out in the Owner's Manual. On the front panel are level controls for Low and High in dual channel 2 way mode, and Low, Mid and High in single channel 3 way mode, with corresponding Outputs on the rear panel.
Balanced Inputs and Outputs EC-2 has Balanced Inputs and Outputs, on XLR connectors. The EC-2 also has an additional summed Mono Low output, for applications that need a Mono Low feed (e.g. Left and Right full-range plus a single Sub Bass speaker). High Pass Filter There is also a preset 30 Hz HighPass filter to remove unwanted subsonics which can damage speakers and waste amplifier power. In addition, each output has up to +6 dB of gain available, to compensate for amplifiers and speakers of differing sensitivities. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240VAC, and is connected to the unit via a standard IEC connector, with built-in fuse and voltage change switch. Uncompromising Audio Quality Innovative circuit design is pointless unless it delivers stunning sound quality, and here the EC-2 excels. It has been designed for uncompromising audio quality, and to achieve this, Linkwitz Riley 24dB (Fourth Order) state variable filters are used throughout, ensuring a smooth Phase Correct transition through the crossover region. From Stage Monitors to Studio Monitors, from Front of House to the Front room of your House, the ARX EC-2 is a crossover that is suited to any application that requires flawless, transparent sound. You'll never compromise on Quality when you choose ARX
T E C H N I C A L S P E C I F I C A T I O N S
Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 21 dB CMRR >45 dB, 20 Hz-20 KHz Output Impedance Balanced 300 ohms, Unbalanced 150 ohms Output Level (Max) + 21dB Frequency Response 30Hz-20KHz +or- 0.5dB Note: 30 Hz is a function of the High Pass filter Signal to Noise ratio (Controls at Unity) -90 dB Unweighted, -93 dB 'A' weighted Distortion 004% THD,0dB,1KHz Dynamic Range 111 dB Power Requirements 100/120 V AC, 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 13/4“H x 6“D, 482 x 44 x 155mm Input Connector type XLR Output Connector type XLR Crossover point frequencies are changed internally by varying the value of 4 resistors per channel.
Front Panel Controls Low and High Output controls for 2 way mode Low, Mid and High Output controls for 3 way mode Marker panels for labelling crossover assigns 2 way/ 3 way status LEDs Rear Panel Balanced XLR Inputs and Outputs Additional summed mono Low output 2 way / 3 way mode switch
Crossover Xover 352921-003 / 364246-001 for the JBL JRX-112M, JRX112M, and JRX 112M cabinet
JBL JRX-112M Specifications:
2-Way
1.8kHz Crossover Frequency
250W RMS / 1000W Peak
8 ohm Nominal Impedance
(1) 1/4" Jack
(1) Neutrik Speakon Jack NL4MP (both jacks can be used for input & output)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
%20br%20%20%20%20?%20Autowarmth?%20br%20%20%20%20?%20Auto%20Gain%20Control%20br%20%20%20%20?%20Compression%20br%20%20%20%20?%20Limiting%20br%20%20%20%20?%20Noise%20Gating%20br%20%20%20%20?%20Notch%20Filtering%20br%20%20%20%20?%20Bandpass%20and%20Crossover%20Filters%20br%20%20%20%20?%20Parametric%20EQ%20br%20%20%20%20?%20Security%20Lockout%20br%20%20%20%20?%20Wall%20Panel%20Control%20br%20%20%20%20?%20RS-232%20Control%20br%20%20%20%20?%20Windows?%202000%20and%20XP%20GUI%20br%20%20%20%20?%20IEC,%20UL%20and%20CSA%20Approvals%20%20%20%20%20/p/tdtdpWith%206%20inputs%20and%204%20outputs%20the%20dbx%20ZonePro?%20640%20and%20641%20provide%20flexible%20signal%20routing,%20brpowerful%20DSP%20processing%20and%20multiple%20control%20interfaces%20for%20Commercial%20Audio%20applications.%20brDesigned%20to%20offer%20superior%20system%20sonic%20performance%20and%20flexibility,%20the%20640/641%20deliver%20the%20brhighest%20quality%20tools%20available.%20Even%20the%20input%20and%20outputs%20connectors%20were%20chosen%20for%20their%20brstandard%20usage%20and%20reliability.%20The%20ZonePro%20products%20offer%20Euroblock%20connectors%20for%20balanced%20brsignals%20and%20RCA%20connectors%20for%20interfacing%20with%20consumer%20equipment%20often%20used%20in%20commercial%20brapplications;%20there%20is%20also%20a%20simple%20analog%20input%20buss%20that%20allows%20inputs%20to%20be%20sent%20from%20one%20brunit%20to%20the%20next%20for%20unit%20and%20job%20scalability.%20The%20640%20and%20641%20provide%20every%20necessary%20processing%20brtool,%20from%20the%20input%20processing%20like%20gain%20control%20and%20EQ%20available%20on%20all%20inputs%20to%20highly%20sophisticated%20brand%20specific%20functions%20such%20as%20selectable%20paging%20microphone%20processing%20including%20Gating,%20brDe-Essing,%20Auto%20Gain%20Control,%20Compression%20and%20Feedback%20Suppression.%20The%20heart%20of%20the%20brZonePro%20products%20is%20the%20Routing%20module%20that%20provides%20of%20course%20Primary%20Source%20Selection%20brbut%20also%20Source%20Ducking%20for%20Paging%20and%20Priority%20Override.%20The%20outputs%20also%20offer%20a%20wealth%20of%20brprocessing%20designed%20for%20commercial%20applications%20like%20our%20patent-pending%20AutoWarmth?%20function%20brthat%20was%20co-developed%20with%20JBL%20to%20provide%20natural%20low%20frequency%20extension%20at%20any%20signal%20level.%20brEach%20output%20also%20offers%20EQ,%20Bandpass%20and%20Crossover%20filters,%20Limiting%20and%20Delay%20for%20system%20broptimization.%20With%20the%20ZonePro?%20every%20tool%20is%20at%20your%20disposal%20to%20maximize%20the%20response%20of%20bryour%20system.brBeyond%20processing,%20the%20ZonePro?%20products%20offer%20multiple%20forms%20of%20control%20to%20further%20extend%20the%20brversatility%20of%20your%20system.%20From%20easy-to-use%20wall%20panel%20Zone%20Controllers%20for%20standard%20end-user%20brfunctions%20like%20source%20select%20and%20volume%20control%20to%20advanced%20system%20control%20including%20a%20built-in%20brReal%20Time%20Clock%20that%20can%20provide%20programmable%20system%20changes%20throughout%20the%20day%20or%20week.%20brFor%20system%20setup%20and%20monitoring%20the%20ZonePro%20Designer%20software%20provides%20an%20intuitive%20interface%20brand%20a%20speedy%20setup%20Wizard%20for%20configuring%20and%20editing%20all%20system%20parameters.%20/p%20pThe%20ZonePro?%20640%20and%20641%20will%20take%20your%20Commercial%20Audio%20system%20to%20the%20next%20level%20with%20advanced%20brprocessing,%20versatility%20and%20control./p%20p?%20Advanced%20Feedback%20Suppression%20(AFS?)%20br?%20Autowarmth?%20br?%20Auto%20Gain%20Control%20br?%20Compression%20br?%20Limiting%20br?%20Noise%20Gating%20br?%20Notch%20Filtering%20br?%20Bandpass%20and%20Crossover%20Filters%20br?%20Parametric%20EQ%20br?%20Security%20Lockout%20br?%20Wall%20Panel%20Control%20br?%20RS-232%20Control%20br?%20Windows?%202000%20and%20XP%20GUI%20br?%20IEC,%20UL%20and%20CSA%20Approvals%20/p/tdtd/td/trtr%20class= "crossover_jrx112")
Reviews
There are no reviews yet.