| Content |
The JRX212 is a portable, twelve-inch, two-way speaker system designed specifically for live performance stage monitoring applications.
| Features : |
|
Specifications : |
- JBL 12 in low frequency driver with a 64 mm (2.5 in)
diameter edgewound ribbon voice coil which provides
more cross-sectional wire area in the voice coil gap than
round wire designs, for greater efficiency and power handling.
|
- JBL 2414H-C 25 mm (1 in) polymer diaphragm
compression driver improves high frequency
performance as well as system reliability.
|
- The advanced network topology crossover design shapes
frequency response and delivers "coherent summation"
in the crossover region.
|
- High-voltage capacitors and inductors with massive cores
and heavy gauge wire enable the crossover network to
handle high power without saturating.
|
- Progressive TransitionTM high frequency waveguide provides
superior coverage control, reduced distortion, and smoother
frequency response.
|
- The rugged, acoustically superior enclosure is constructed
from 19 mm (.75 in) MDF (Medium Density Fiberboard) using
advanced adhesives and mechanical fastener technology for
extreme durability and improved low-frequency performance.
|
- SonicGuardTM protects the high frequency driver from excess
power without interrupting the performance.
|
- Non-resonant, all-steel handles are used.
|
- Attractive 18-gauge hexagon perforated, steel grille protects
components from damage.
|
- Dual-angle pole-mount socket allows the speaker to tilt
10°for more uniform audience coverage.
|
|
|
| Power Rating |
: |
250 W / 1000 W |
|
| Frequency Range (-10 dB) |
: |
60 Hz - 20 kHz |
|
| Frequency Response (±3 dB) |
: |
80 Hz - 18 kHz |
|
| Sensitivity (@1m) |
: |
98 dB SPL
(1w/1m) |
|
| Nominal Impedance |
: |
8 ohms |
|
| Recommended Amplifier Power |
: |
250 W to 500 W into 8 ohms |
|
|
|
| Nominal Dispersion |
: |
90º x 50º |
|
| Crossover Frequency |
: |
2.1 kHz |
|
Dimensions
(H x W x D) |
: |
584 mm x 399 mm x 325 mm
(23 in x 15.7 in x 12.8 in) |
|
|
|
| High Frequency Driver |
: |
JBL 2414H-C 1" exit compression driver mounted on Progressive TransitionTM Waveguide |
|
| Low Frequency Driver |
: |
JBL M112-8 |
|
| Input Connectors |
: |
Neutrik® Speakon® NL-4 (x1); .25 in
TS phone jack (x1); parallel |
|
| Grille |
: |
18-gauge, powder-coated steel |
|
| Mounting & Suspension |
: |
36 mm, dual-angle pole-mount socket |
|
|
|
The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
| Features |
|---|
| 60° x 40° CMD (Constant Matching Design) constant directivity horn | | 1.4" neodymium compression driver with 2.5" diaphragm assembly | | 12" woofer with 3" voice coil | | Dual-function design: built in passive crossover or external bi-amp | | Rotatable Horn System for horizontal cabinet mounting applications | | HF driver AMCDP (Active Mosfet Compression Driver Protection) | |
LICC (Low Impedance Compensated Crossover) network
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 132 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 10 | | | System Sensitivity: | 99 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 500 Watt | | | Peak Power Handling: | 200 Watt | | | Recommended Amplifier: | 1000 | | | Protections: | Dynamic | | | Crossover frequencies: | 1200 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 2“HF driver, 2.5" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 100 Watt AES | | | Sensitivity: | 111 dB | | | Woofer: | 12" woofer, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 400 Watts AES | | | Sensitivity: | 98 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 - Full range or Bi-Amp | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 9 x M10 inserts | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, white, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 600 / 23.62 mm/inch | | | Width: | 364 / 14.33 mm/inch | | | Depth: | 385 / 15.16 mm/inch | | | Net Weight: | 23 / 50.7 Kg/Lbs |
|
|
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, λευκού χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
Features
* DVX3121 12" LF Transducer with forced air cooling
* ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
* 90° x 50° Coverage Pattern
* 600W Continuous (2400W peak) power handling
* High sensitivity, 131 dB maximum SPL
* Adjustable monitor angle (45° or 55°)
* 2 Anchor plates for single stud fittings and 7integral suspension points
* Available in black or white
* Passive/biamp selectable
* Full line of accessories
Specifications
* Frequency Response (-3dB): 58Hz-15kHz
* Frequency Range (-10dB): 48Hz-20kHz
* Rec. Hipass Frequency: 50Hz
* Axial Sensitivity: 97dB (1W/1m)
* Max. Calculated SPL: 131 dB
* Horizontal Coverage: 90°
* Vertical Coverage: 50°
* Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
* LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
* HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
* LF Transducer: DVX3121, 12" driver
* HF Transducer: ND2, 1" exit Neodymium compressiondriver
* Crossover Frequency: 2kHz
* Nominal Impedance: 8 ohms
* Minimum Impedance: 6.2 ohms
* Connectors: (2) Neutrik Speakon NL4\'s
* Enclosure Material: Polypropylene structural foam
* Suspension: Enclosure has locations for 4 single-studattachment plates and 10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear of enclosure
* Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
* Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
* Net Weight: 43.7 lbs
* Shipping Weight: 48.6 lbs |
The MI-112 is a 2-way passive full range loudspeaker that utilizes a 12? cone
low frequency transducer and a 1? throat compression driver with titanium
diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board
and finished with a hard-wearing black carpet. Two bar handles and a steel grille
sealed against corrosion using a polyamide powder coat finish are provided. A 35
mm tripod socket allows for stand mounting.
APPLICATIONS:
Intended for use in portable sound reinforcement and P.A.
FEATURES:
2-way vented loudspeaker system
1 x 12" speaker
1" compression driver with constant directivity horn
225 W power handling
Highly resistant CAB enclosure
SPECIFICATIONS:
RMS (Average) Power HandlingR: 225 W
Program Power HandlingP: 450 W
Peak Power HandlingK: 900 W
On-axis Frequency RangeF: 60 Hz - 16 kHz
Nominal Impedance: 8 Ω
On-axis Sensitivity 1W / 1 mS: 98 dB SPL
Rated Peak SPL at Full Power:128 dB
Nominal -6 dB BeamwidthsB: 90° Horizontal
(average, 500 Hz to 8 kHz) 75° Vertical
Speech Coverage AnglesC: 90° Horizontal x 80° Vertical
Enclosure Material:Complex Aggregate Board
Finish:Blue Gray carpet
Connector: 2 paralleled NL4 Speakon, wired
Dimensions (H x W x D): 59 x 43 x 35 cm / 26.5 x 19 x 15.4 in
Weight: 20.3 kg/ 45 lbs
Shipping Weight: 23.5 kg/ 52 lbs |
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, μαύρο χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
Reviews
There are no reviews yet.