The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W […]
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \’from the ground up\’ in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS – 124dB SPL
200mm (8’’) custom woofer with improved efficiency and linearity
200Wrms class D amplifier for LF and 50Wrms for HF.
Low noise toroidal transformer power supply
On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
2 DSP preset for maximum acoustical flexibility
Available in white colour 8AW
Code:
37689 / 37906 White
Configuration:
2 way
Built-in amplifier LF/HF:
200/50 W RMS
Built-in amplifier peak LF/HF:
400/100 W
Frequency response:
60Hz – 20KHz -6dB
Low Frequency woofer:
8 – 1.7 coil inch
High Frequency driver:
1 -1 coil inch
Maximum SPL cont/peak:
120/124 dB
Dispersion:
90° x 60° HxV
Input impedance:
22 Kohm
Crossover Frequency:
2.5 KHz
AC Power requirements:
160 VA
Input connector:
XLR – jack with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
255x415x245 – 10.03×16.33×9.64 mm/inch
Net Weight:
8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD):
330x480x320 – 12.99×18.89×12.59 mm/inch
Transport Weight:
9.7 / 21.38 Kg/lb
Weight
9.00 kg
Reviews
There are no reviews yet.
Be the first to review “FBT J8A Active speaker 8″ 250W” Cancel reply
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
200mm (8’’) custom woofer with improved efficiency and linearity
200Wrms class D amplifier for LF and 50Wrms for HF.
Low noise toroidal transformer power supply
On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
2 DSP preset for maximum acoustical flexibility
Available in white colour 8AW
Code:
37689 / 37906 White
Configuration:
2 way
Built-in amplifier LF/HF:
200/50 W RMS
Built-in amplifier peak LF/HF:
400/100 W
Frequency response:
60Hz - 20KHz -6dB
Low Frequency woofer:
8 - 1.7 coil inch
High Frequency driver:
1 -1 coil inch
Maximum SPL cont/peak:
120/124 dB
Dispersion:
90° x 60° HxV
Input impedance:
22 Kohm
Crossover Frequency:
2.5 KHz
AC Power requirements:
160 VA
Input connector:
XLR - jack with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
255x415x245 - 10.03x16.33x9.64 mm/inch
Net Weight:
8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD):
330x480x320 - 12.99x18.89x12.59 mm/inch
Transport Weight:
9.7 / 21.38 Kg/lb
Features
Compact and powerful performance
1000 Watt peak power Class-D amplifier module
Easily selected contours for commonly-used applications
Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
Light weight and highly portable
Professional appearance looks great in any application
Use for main PA, stage monitor, or instrument amplifier
35 mm pole socket
Optional yoke, tote, and outdoor cover accessories
Complete EASE and CAD information available online
Model
CP8
Configuration
Two-way active loudspeaker
LF Transducer:
8 in (203 mm), cone
HF Transducer:
1.4 in (35.6 mm) compression driver
Frequency Response (-6 dB)
56 - 20 kHz
Frequency Range (-10 dB)
53 - 20 kHz
Nominal Coverage Angle:
90° Axisymetric
Maximum Rated SPL1:
124 dB
Amplifier:
Class D
Peak: 800 W (LF), 200 W (HF)
Controls:
Power
2 x Gain
Mic Boost Push Switch
6-way Contour Selection Switch
Indicators:
Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED
Connectors:
2 x locking XLR/F ¼” combo (Line Input and Mic/Line input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector
AC Power Input:
Universal power supply 100 – 240 VAC, 50 – 60 Hz
AC Power Consumption (1/8th Power):
100 VAC, 0.75A - 240VAC 0.31A
Enclosure Material:
Polypropylene
Attachment Points:
M8 threaded insert
Color:
Black (RAL 9011)
Grille:
18 Gauge powder-coated steel
Dimensions (HxWxD):
16.2 x 10.7 x 10.1 in
411 x 273 x 256 mm
Net Weight:
21.0 lbs (9.5 kg)
Shipping Weight:
25.5 lbs (11.4 kg)
Regulatory:
EMC, UL, CB
Optional Accessories:
CP8 Tote, CP8 Outdoor Cover, CP8 Yoke
- PS 08 but active
- Amplifier: 120Wrms (240 Music)
- Balanced MIC + LINE input with level control
- Balanced LINE outputs
- Treble + Bass Master volume control +
Technical Data
- Amplifier power: 120Wrms / 240Wmusic
- Signal / noise rate: 85dB
- Micro input: 1.5mV @ 20kΩ
- Line input: 1V @ 20kΩ
- Tone controls: +/- 12dB @ 100Hz and 10kHz
- Frequency response: 70 - 20,000Hz
- Woofer: 8 "woofer (20cm)
- Compression Driver / Horn: 1 "voice coil
- Nominal dispersion: 90 ° x 60 ° (HxV)
- Mains Input: 115Vac / 60Hz - 230V AC / 50Hz
- Fuse: 250V 3.15A slow blow (20mm glass)
- Dimensions: 402 x 294 x 220 mm
- Weight: 8kg
The QSC K.2 Series™ represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.
Features
Best in class audio performance
2000 Watt Class-D amplifier module
Intrinsic Correction™ tuning and loudspeaker management
DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
Refined, professional appearance looks great in any application
Rugged ABS enclosure for long life and lasting durability
Deployment in either main PA or floor monitor position
Factory Presets and savable/recallable Scenes for commonly-used application
Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
Dual pole cup mounts (standard and 7.5 degree down-tilt)
M10 fittings for flown applications
Optional security panel prevents unauthorized tampering of controls
Complete EASE and CAD information available online
Power 3 x Level Rotary encoder (push) 2 x selection buttons
Indicators
Monochrome LCD Display 1.75-inch x 1-inch (45 mm x 25.4 mm) 2 x Power LED (front and rear) 3 x Input Signal LED Input A Mic selected LED Input B Hi-Z selected LED Limiter active LED
Connectors
2 x locking XLR/F ¼⁻ᶦⁿᶜʰ combo (Mic/Line Input and Hi-Z/Line Input 1 x 3.5 mm TRS (Stereo Input) 2 x XLR/M (Loop-thru Output) 1 x XLR/M (Mix Output) 1 x locking IEC power connector
LD Systems STINGER 8 A G3
Active 8" 2-way bass-reflex PA speaker
2-way active 8” bass reflex PA speaker
High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
Multi-purpose design for fullrange, satellite and monitor applications
Application presets for quick frequency response contouring
BEM optimized HF waveguide for uniform coverage
8” custom woofer and BMS compression driver
DynX® DSP technology for distortion-free performance
2 line/mic input channels with individual gain controls plus mono mix out
12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Shock-resistant front grill provides maximum speaker protection
36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
Large selection of smart installation and transport accessories
STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
8 "
Woofer Size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
300 W
Peak power
600 W
Frequency response
70 - 20000 Hz
Max. SPL (peak)
125 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-9 dBu
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching Power Supply
Operating Temperature
0 - 40 °C
Relative Humidity:
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
457 mm
Depth
290 mm
Weight
10,8 kg
High-power 300-Watt 2-way PA sound reinforcement speaker system for live and playback applications. "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included). Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection. Additional Line output allows linking of additional speaker systems.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual
Reviews
There are no reviews yet.