Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
Code: |
37689 / 37906 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
200/50 W RMS |
Built-in amplifier peak LF/HF: |
400/100 W |
Frequency response: |
60Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
120/124 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2.5 KHz |
AC Power requirements: |
160 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
8.2 / 18.7 Kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
9.7 / 21.38 Kg/lb |
|
Features
- Powered 2-way, full-range system
- 8″ bass loudspeaker
- Compression driver with titanium diaphragm
- Multiple mounting options
- Stand mountable
The DR-508A is powered full-range system that uses a new 8” low frequency transducer. The M-34 compression driver handles high frequency reproduction.
The 1000 W peak power Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the DR-508A one of the smallest and most powerful portable cabinets on the market.
Technical Data
Nominal Amplifier Power | 1000 W peak, 500 W continuous
Class D, Biamplified | Frequency Range (-10 dB) | 60 Hz-20 kHz | Rated Peak SPL at 1 m | 122 dB | Dispersion | 90º x 45º | Enclosure Material | Polypropylene | Color/Finish | Black | Connectors | IN: Female XLR
LOOP THRU: Male XLR
AC IN: powerCON | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | Current Draw (1/3 power @ 230 V) | 1.2 A | Dimensions (H x W x D) | 45 x 30 x 30 cm
18 x 12 x 12 in | Weight | 11.4 kg (25.1 lb) |
|
Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc. |
Features
400 Watt digital bi-amplification
126 dB max spl
Wide dispersion 90 x 70 constant directivity horn
8" High power neodymium woofer, 2.5" voice coil
1" Mylar dome, neodymium high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 65 Hz ÷ 20 kHz
Max SPL: 126 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 70°
Compression Driver: 1" neo, 1.4" voice coil
Woofer: 8" neo, 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr - Jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Connections: VDE
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top
Pole Mount/Cap: Yes
Grille: Steel
Colour: Anthracite grey
Physical Specifications
Height: 480/18.9 mm/inch
Width: 291/11.45 mm/inch
Depth: 274/10.7 mm/inch
Net Weight: 9.2/20.28 kg/lbs
|
The QSC K.2 Series™ represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.
Features
- Best in class audio performance
- 2000 Watt Class-D amplifier module
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Factory Presets and savable/recallable Scenes for commonly-used application
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
Model |
K8.2 |
Configuration |
Multi-purpose, 2-way active loudspeaker |
LF Transducer |
8-inch (203 mm), cone |
HF Transducer |
1.4-inch (35.6 mm) titanium diaphragm compression driver |
Frequency Response (-6 dB) |
59 Hz - 20 kHz |
Frequency Range (-10 dB) |
55 Hz - 20 kHz |
Nominal Coverage Angle |
105° Axisymetric |
Maximum Rated SPL1 Amplifier Cooling |
128 dB @1 M, peak 122 dB @ 1 M, continuous Class D Peak: 1800 W (LF), 225 W (HF) Low-noise, variable speed fan |
Controls |
Power 3 x Level Rotary encoder (push) 2 x selection buttons |
Indicators |
Monochrome LCD Display 1.75-inch x 1-inch (45 mm x 25.4 mm) 2 x Power LED (front and rear) 3 x Input Signal LED Input A Mic selected LED Input B Hi-Z selected LED Limiter active LED |
Connectors |
2 x locking XLR/F ¼⁻ᶦⁿᶜʰ combo (Mic/Line Input and Hi-Z/Line Input 1 x 3.5 mm TRS (Stereo Input) 2 x XLR/M (Loop-thru Output) 1 x XLR/M (Mix Output) 1 x locking IEC power connector |
AC Power Input |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
AC Power Consumption 1/8th Power2 |
100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 A |
AC Power Consumption - Standby |
.2A at any voltage |
Enclosure Details |
|
Enclosure |
Impact Resistant ABS |
Attachment Points |
2 x M10 threaded inserts plus Pull-Back |
Color |
Black (RAL 9011) |
Grille |
18 Gauge powered coated steel, internal cloth lining |
Dimensions (HxWxD) |
17.7 x 11 x 10.6 in 449 x 280 x 269 mm |
Net Weight |
12.2 kg (27 lbs) |
Shipping Weight |
14.4 kg (31.8 lbs) |
Regulatory |
CE, WEEE, UL, China RoHS, RoHS II, FCC Class B |
Optional Accessories |
K8 Tote, K8 Outdoor Cover M10 Kit-C, K.2-LOC Lock Out Cover K8.2 Yoke |
|
- 2-way bi-amplified, bass-reflex design
- 200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
- 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
- Frequency response from 65Hz to 20 kHz
- 80°H x 50°V Constant Directivity Rotatable Horn
- optional wall bracket mount thread, 35mm (1 3/8”) top-hat
- one integrated pocket handle
Code: |
41212 |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
700/200 W RMS |
Built-in amplifier peak LF/HF: |
1400/400 W |
Frequency response: |
65Hz-20kHz -6dB |
Low Frequency woofer: |
8 - 2 coil inch |
High Frequency driver: |
1 - 1.4 coil inch |
Maximum SPL cont/peak: |
123/131 dB |
Dispersion: |
80°x50° rotatable HxV |
Input impedance: |
22 Kohm |
AC Power requirements: |
640 VA |
Input connector: |
XLR with loop, RCA ST |
Power cord: |
5/16.4 m/ft |
Net Dimension (WxHxD): |
274x500x300 / 10.8x19.7x11.8 mm/inch |
Net Weight: |
15.6/34.39 Kg/lb |
Transport Dimension (WxHxD): |
395x620x375 / 15.5x24.4x14.7 mm/inch |
Transport Weight: |
15.3/33.7 Kg/lb |
|
Reviews
There are no reviews yet.