| Content | The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback.
Features :
- Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
|
- JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
|
- The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
|
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
|
- Progressive TransitionTM high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
|
- The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
|
- SonicGuardTM protects the highfrequency driver from excess power without interrupting the performance.
|
- Non-resonant, all-steel handles are used.
|
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
|
Specifications :
| Power Rating |
: |
500 W / 2000 W |
|
| Frequency Range (-10 dB) |
: |
42 Hz - 18 kHz |
|
| Frequency Response (±3 dB) |
: |
62 Hz - 13 kHz |
|
| Sensitivity (1w/1m) |
: |
100 dB SPL |
|
| Nominal Impedance |
: |
4 ohms |
|
| Recommended Amplifier Power |
: |
500 W to 1000 W into 4 ohms |
|
|
|
| Nominal Dispersion |
: |
90º x 50º |
|
| Crossover Frequency |
: |
2.2 kHz |
|
| Dimensions
(H x W x D) |
: |
1092 mm x 464 mm x 432 mm
(43 in x 18.3 in x 17 in) |
|
|
|
| High Frequency Driver |
: |
JBL 2414H-C , 1" exit compression driver mounted on Progressive TransitionTM Waveguide |
|
| Low Frequency Driver |
: |
JBL M115-8A x 2 |
|
| Input Connectors |
: |
Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel |
|
| Grille |
: |
18-gauge, powder-coated steel |
|
|
Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.
Product Specifications - Enclosure: Sealed type
- Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
- Rated Impedance: 8 Ω
- Sensitivity: 98 dB (1 W, 1 m)
- Frequency Response: 70 - 20,000 Hz
- Crossover Frequency: 3 kHz
- Directivity Angle: Horizontal: 90゜, Vertical: 40゜
- Speaker Component: Low frequency: 38 cm (15) cone-type
- Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
- Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
- Finish: Enclosure: Polypropylene, White
- Punched net: Surface-treated steel plate, White
- Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
- Weight: 12 kg (26.46 lb)
|
Electro voice Zx5-60B
The Zx5 is a 15“, 2-way cabinet with a lightweight, high-impact composite enclosure, featuring the newest generation
of EV components: the DXV3150, 500W, 15" forced air cooled woofer with 3" voice coil, and the ND2, 2" neodymium
compression driver with a 2 mil titanium diaphragm. The Zx5 is rated for 600 watts long-term power handling (2400 W peak)
and can produce 132 dB SPL with very smooth 58Hz-15kHz frequency response. With two available coverage patterns
(60?°x60?° or 90?°x50?°), two adjustable monitor angles (45?° or 55?°) and ten built-in rigging and suspension points allowing
for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters
in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies.
EV Zx5 loudspeakers are available in black and white for indoors and dedicated PI versions for outdoor applications.
|
|
Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15" low frequency driver with 2" titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.
| |
SPECIFICATIONS
| | MODEL | TITAN 15 PASSIVE | | GENERAL INFO |
| | System type | 15" 2-way passive | | Frequency response +/- 3db | 50-18kHz | | Sensitivity (db 1w@1m) | 97dB | | System impedance | 8 ohms | | Maximum SPL Peak dB | 129dB | | POWER HANDLING (Watts) |
| | Continuous RMS | 400 | | Program | 800 | | Peak | 1600 | | LF DRIVER |
| | Lf driver size mm / inches | 1x15“ | | Lf voice coil size | 75mm/3“ | | HF SECTION |
| | Hf voice coil size | 51mm/2" | | Hf type | Compression Driver | | Hf diaphragm material | Titanium | | Horn dispersion (H x V) | 90 x 60 | | Hf exit size mm / inches | 25mm/1“ | | Hf horn shape | EWG™ - Elliptical Waveguide | | Hf peak indicator | Peak LED ring in horn throat | | CROSSOVER SECTION | 2-way | | Crossover Frequency / Filter | 1.8kHz / 12dB per oct. | | Hf driver protection | DTF™ - Dynamic Thermal Filament (2 x SK3 Bulb) | | PHYSICAL FEATURES |
| | Finish | Black or White | | Handle quantity | 2 carry handles (one on each side) | | Suspension points | (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint | | Stand adapter - BOTTOM | Pole-mount receptacle with lock screw, Optional wall-mount bracket | | Enclosure type | Molded Polypropylene | | Enclosure shape | Trapezoidal for vertical array and horizontal stage monitor applications | | IN / OUT PANEL (speaker Level) |
| | Input connector | 2 x 1/4" jacks and2 x Speakon™ | | DIMENSIONS & WEIGHT |
| | Height ( mm / ins ) | 708mm/27.9“ | | Width Front / Rear / mm / ins | 477.8mm/18.8“ | | Depth ( mm / ins ) | 401.77mm/15.8“ | | Net weight ( kg / lbs ) | 22kg/48.4 lbs | | Gross weight ( kg / lbs ) | 25kg/55 lbs | |
|
The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18“) |
Description:
The SX18 is a switchable 3 way active, 2 way passive, arrayable loudspeaker. Designed to be used as the main enclosure for small to mid-sized venues or as a supplemental cabinet for large scale sound reinforcement, this enclosure provides high sound pressure levels in a small, lightweight package. Adamson?s Proprietary Kevlar drivers and internal crossovers are employed throughout the SX18 enclosure and its integral fly hardware makes installation of the product fast and effective. Moving the SX18 is easy and efficient with the supplied dolly board. A flexible, high powered enclosure, the SX18 is suited for a wide variety of applications.
Applications:
Live Concert Reproduction
Side Fill Monitoring
Near Field Applications
Theatres
Houses of worship
Dance Clubs
Features:
Kevlar 18" bass and 10" midrange Drivers
1.5" High Frequency Compression Driver
2-Way Bi-Amp/3-Way Tri-amp Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points
Supplied Dolly Board
Durable, Dual Component Finish
Honeycomb Punched, Steel Grille
Roadworthy Construction
Weight: 67 kg
|
Reviews
There are no reviews yet.