QSC GX-3 POWER AMPLIFIER 2x425W RMS @ 4Ω, 2x300W RMS @ 8Ω

489.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
overview specs docs Specifications – Signal to Noise (20 Hz – 20 kHz): 100 dB – Input Sensitivity: 1.2 Vrms – Voltage Gain (8 Ohms): 32.2 dB – Output Circuitry: Class B – Power Requirements: 6.3A – Frequency Response: 20 Hz – 20 kHz, +0, 1 dB – Dynamic Headroom (4 Ohms): 2 dB – […]

 

Read more

overview specs docs
Specifications
– Signal to Noise (20 Hz – 20 kHz): 100 dB
– Input Sensitivity: 1.2 Vrms
– Voltage Gain (8 Ohms): 32.2 dB
– Output Circuitry: Class B
– Power Requirements: 6.3A
– Frequency Response: 20 Hz – 20 kHz, +0, 1 dB
– Dynamic Headroom (4 Ohms): 2 dB
– Damping Factor: 100
– Input Impedance: Greater than 20k (balanced)
– Maximum Input Level: +24 dB (16 Vrms)
– Input Connectors (each channel): 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced
– Output Connectors (each channel): Speakon, 1/4-inch, Binding Posts
– Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults
– Rear Panel Controls: Full Range / Crossover switch
– Dimensions (H x W x D): 3.5 x 19 x 10.1 inches (89 mm x 483 mm x 257 mm)
– Weight: 25 lbs (11.5 kg)

Stereo Mode:
– 8 Ohms / both channels driven: 300 Watts
– 8 Ohms / single channel driven: 350 Watts
– 4 Ohms / both channels driven: 425 Watts
– 4 Ohms / single channel driven: 500 Watts
– 2 Ohms / both channels driven: 200 Watts

Distortion:
– 8 Ohms: less than 0.05%
– 4 Ohms: less than 0.1%

Front Panel Controls and Indicators:
– Gain controls, 21 detents
– Red Clip LEDs, proportional, 0.1% THD threshold
– Green Signal LEDs, threshold -35 dB
– Blue Power LED, AC on

Dimensions and Weight in Packaging
    Shipping Weight: 28 lbs
    Shipping Dimensions: 24 x 15 x 6 in

Weight 12.10 kg

Reviews

There are no reviews yet.

Be the first to review “QSC GX-3 POWER AMPLIFIER 2x425W RMS @ 4Ω, 2x300W RMS @ 8Ω”

Your email address will not be published. Required fields are marked *

Quick Comparison

QSC GX-3 POWER AMPLIFIER 2x425W RMS @ 4Ω, 2x300W RMS @ 8Ω removeInterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm removeINTERM R-150 PLUS AMPLIFIER 2X75W removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeINTERM R-500 PLUS AMPLIFIER 2X250W remove
NameQSC GX-3 POWER AMPLIFIER 2x425W RMS @ 4Ω, 2x300W RMS @ 8Ω removeInterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm removeINTERM R-150 PLUS AMPLIFIER 2X75W removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeINTERM R-500 PLUS AMPLIFIER 2X250W remove
Image
SKU010004V-1000R-150 PLUSE009302L500R-500 PLUS
Rating
Price 489.00 incl. GR VAT 330.26 incl. GR VAT 459.00 incl. GR VAT 754.00 incl. GR VAT 1,070.11 incl. GR VAT 761.00 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

AvailabilityIn stockIn stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

overview specs docs
Specifications
- Signal to Noise (20 Hz - 20 kHz): 100 dB
- Input Sensitivity: 1.2 Vrms
- Voltage Gain (8 Ohms): 32.2 dB
- Output Circuitry: Class B
- Power Requirements: 6.3A
- Frequency Response: 20 Hz - 20 kHz, +0, 1 dB
- Dynamic Headroom (4 Ohms): 2 dB
- Damping Factor: 100
- Input Impedance: Greater than 20k (balanced)
- Maximum Input Level: +24 dB (16 Vrms)
- Input Connectors (each channel): 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced
- Output Connectors (each channel): Speakon, 1/4-inch, Binding Posts
- Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults
- Rear Panel Controls: Full Range / Crossover switch
- Dimensions (H x W x D): 3.5 x 19 x 10.1 inches (89 mm x 483 mm x 257 mm)
- Weight: 25 lbs (11.5 kg)

Stereo Mode:
- 8 Ohms / both channels driven: 300 Watts
- 8 Ohms / single channel driven: 350 Watts
- 4 Ohms / both channels driven: 425 Watts
- 4 Ohms / single channel driven: 500 Watts
- 2 Ohms / both channels driven: 200 Watts

Distortion:
- 8 Ohms: less than 0.05%
- 4 Ohms: less than 0.1%

Front Panel Controls and Indicators:
- Gain controls, 21 detents
- Red Clip LEDs, proportional, 0.1% THD threshold
- Green Signal LEDs, threshold -35 dB
- Blue Power LED, AC on

Dimensions and Weight in Packaging
    Shipping Weight: 28 lbs
    Shipping Dimensions: 24 x 15 x 6 in

InterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm bridge 1200W/4ohm 10-83kHz

high pass filter 30Ηz & 50Ηz

Power Output Level R-150 PLUS

STEREO
8ohm(T.H.D 0.05%)  50W+50W
4ohm(T.H.D 0.05%)  75W+75W

BRIDGED MONO
8ohm(T.H.D 0.05%)  50W
8ohm(T.H.D 0.5%)  170W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

Weight12.10 kg10.30 kg7.20 kg12.60 kg16.00 kg10.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 12.10 kg
Weight 10.30 kg
Weight 7.20 kg
Weight 12.60 kg
Weight 16.00 kg
Weight 10.40 kg