AKG C 3000B Condenser cardioid microphone

209.99 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
  Polar pattern: Cardioid Switchable -10dB PAD Frequency response: 20 – 20,000 Hz Max. SPL: 140/150 dB (THD = 0.5%) Electrical impedance: 200 Ohm Requires phantom power Diameter: 53 mm Length: 162 mm Net weight: 320 g Colour: Black Incl. shock mount Highly affordable AKG large-diaphragm microphone technology Cardioid polar pattern for multiplicity of vocal […]

 

Read more

 
  • Polar pattern: Cardioid
  • Switchable -10dB PAD
  • Frequency response: 20 – 20,000 Hz
  • Max. SPL: 140/150 dB (THD = 0.5%)
  • Electrical impedance: 200 Ohm
  • Requires phantom power
  • Diameter: 53 mm
  • Length: 162 mm
  • Net weight: 320 g
  • Colour: Black
  • Incl. shock mount
  • Highly affordable AKG large-diaphragm microphone technology
  • Cardioid polar pattern for multiplicity of vocal and instrument applications

The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost.

Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\’s SPL capability by a true 10 dB. Loud sound sources are therefore no problem.

An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.

Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3) 25 dB
Equivalent noise level 14 dB-A
Signal/noise ratio (A-weighted) 80 dB
Preattenuation pad 10 dB, switchable
Bass filter 6 dB/octave below 500 Hz
Impedance 200 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption
Connector 3-pin XLR
Finish silver gray
Net weight 320 g / 11.3 oz.
Shipping weight 950 g / 2.1 lbs.
Patent(s) Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AKG C 3000B Condenser cardioid microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG C 3000B Condenser cardioid microphone removeNEUMANN M-150 TUBE Condenser Tube Microphone removeNEUMANN U-87 Ai Studio Set Condenser studio microphone removeBEHRINGER C1 Studio Condenser Microphone removeBEHRINGER B-5 Sputtered Diaphragm Studio Condenser Microphone removeRODE NT-1000 1 STUDIO CONDESER MICROPHONE remove
NameAKG C 3000B Condenser cardioid microphone removeNEUMANN M-150 TUBE Condenser Tube Microphone removeNEUMANN U-87 Ai Studio Set Condenser studio microphone removeBEHRINGER C1 Studio Condenser Microphone removeBEHRINGER B-5 Sputtered Diaphragm Studio Condenser Microphone removeRODE NT-1000 1 STUDIO CONDESER MICROPHONE remove
Image
SKUC 3000BH11NE00026H11NE00046E005249E005243H11RD00002
Rating
Price 209.99 incl. GR VAT 6,659.00 incl. GR VAT 2,849.00 incl. GR VAT 57.00 incl. GR VAT 80.00 incl. GR VAT 332.00 incl. GR VAT
Stock

In stock (can be backordered)

Only 5 left in stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityIn stock (can be backordered)Only 5 left in stockIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content 
  • Polar pattern: Cardioid
  • Switchable -10dB PAD
  • Frequency response: 20 - 20,000 Hz
  • Max. SPL: 140/150 dB (THD = 0.5%)
  • Electrical impedance: 200 Ohm
  • Requires phantom power
  • Diameter: 53 mm
  • Length: 162 mm
  • Net weight: 320 g
  • Colour: Black
  • Incl. shock mount
  • Highly affordable AKG large-diaphragm microphone technology
  • Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost. Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem. An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3) 25 dB
Equivalent noise level 14 dB-A
Signal/noise ratio (A-weighted) 80 dB
Preattenuation pad 10 dB, switchable
Bass filter 6 dB/octave below 500 Hz
Impedance 200 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption
Connector 3-pin XLR
Finish silver gray
Net weight 320 g / 11.3 oz.
Shipping weight 950 g / 2.1 lbs.
Patent(s) Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
Acoustical operating principlePressure transducer
Directional patternOmnidirectional
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm20 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-328 dB
Equivalent SPL DIN/IEC 65115 dB-A
S/N ratio CCIR 468-366 dB
S/N ratio DIN/IEC 65179 dB
Max. SPL (tube characteristic)K
Dynamic range (of the amplifier)K
Maximum output voltage8 dBu
Weight800 g
Diameter78 mm
Length165 mm
* THD of the microphone amplifier at an input voltage which is equivalent to the capsule output voltage at the specified SPL.
Variable large diaphragm microphone
Pressure-gradient transducer with double membrane capsule
The studio microphone classic
Three directional characteristics: omni, cardioid, figure-8
Switchable low frequency roll-off
Switchable 10 dB pre-attenuation

Ideal as main and as support microphone in the most differing recording situations

 

Acoustical operating principle Pressure gradient transducer
Directional pattern Omnidirectional, cardioid, figure-8 plus
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 20/28/22 mV/Pa1)
Rated impedance 200 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR2) 26/23/25 dB1)
Equivalent noise level, A-weighted2) 15/12/14 dB-A1)
Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL) 68/71/69 dB1)
Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL) 79/82/80 dB1)
Maximum SPL for THD 0.5%3) 117 dB (cardioid)
Maximum SPL for THD 0.5% with preattenuation3) 127 dB
Maximum output voltage 390 mV
Dynamic range of the microphone amplifier (A-weighted) 105 dB
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 0.8 mA
Matching connectors XLR3F
Weight 500 g
Diameter 56 mm
Length 200 mm

 

Behringer C-1 Studio Condenser Microphone   Behringer C-1 Studio Condenser Microphone The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case.
  • Professional large-diaphragm condenser microphone for unsurpassed audio quality
  • Ideal as main and support microphone for studio and live applications
  • Exceptionally flat frequency response and ultra-high sound resolution
  • Cardioid pickup pattern for outstanding sound source separation and feedback rejection
  • Ultra low-noise transformerless FET input circuitry
  • LED indicates phantom power operation
  • Gold-plated 3-pin XLR output connector for perfect signal transmission
  • Ultra-rugged construction with die-cast body
  • Swivel stand mount and carrying case included
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 0.63" / 16.0 mm
Polar Pattern Cardioid
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 136 dB SPL
Impedance 100 Ohms
Load Impedance 1000 Ohms
Sensitivity -33 dB
THD 1%
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin
Power
Operating Voltage 36 to 52 V
Operating Current Consumption 2.5 µA
Physical 0.93 lb / 0.42 kg
Dimensions ø: 2.13 x L: 7.09" / ø: 54 x L: 180 mm
Weight
 

Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone



The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.

 

Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10 dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included

 

 

 

Manual Download

NT1000 - ?Pure Performance? Ultra Versatile 1? Studio Condenser Microphone.

With its ultra low 6 dBA self-noise and transformer less SMT circuitry, the
R?DE NT1000 exhibits exceptional performance when recording both vocals
and instruments in the studio.
Voiced for ?application versatility?, the NT1000 has been hailed by many as the
ultimate drum over-head and grand piano mic selection. The NT1000 is also
equally at home as a first call vocal mic. With its Australian made 1? HF-2 capsule
incorporating internal shock mounting, the NT1000 boasts a 134 dB dynamic range,
and 140 dBA SPL capabilities and a 20 Hz ? 20 kHz frequency response.
Built of a heavy-duty cast metal satin nickel body, the NT1000 incorporates a
high-strength, heat-treated mesh head, and comes supplied in a zip pouch with a
stand mount.

SPECIFICATIONS:
Acoustic principle:
Externally polarised 1? (25mm) pressure-gradient condenser
Directional pattern: Cardioid
Frequency range: 20Hz - 20kHz
Output impedance: 100?
Signal noise ratio din iec 651:
> 88dB (A-weighted, per IEC268-15)
Equvalent noise:
6dB SPL (A-weighted per IEC268-15) +/-1dB
Maximum spl:
> 140dB SPL (@ 1kHz, 1% THD into 1k( load)
Sensitivity:
-36dB re 1V/Pa (16mV @ 94dB SPL) +/-1dB
Dynamic range din iec 651: > 134dB (A-weighted, per IEC268-15)
Power supply voltage: P48 (35V - 53V)
Current consumption: 6mA
Weight without battery: 682 gm
Weight with battery:  882 gm

Weight1.00 kg0.80 kg2.00 kg0.50 kg0.40 kg1.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.80 kg
Weight 2.00 kg
Weight 0.50 kg
Weight 0.40 kg
Weight 1.50 kg