JBL 308P MKII Active Studio Monitor 8inch

DM-2100: 2.1-ch Speaker System Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

• Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
• Powered bass reflex speakers with 15 watts per side and flat frequency response
• Active subwoofer with 50-watt amplifier for increased low end
• Front-mounted controls convenient located on right speaker
• Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
• Sleek black wooden cabinets with magnetic shielding

High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer

• Ultra-linear studio monitor with true active design
• Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
• Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
• Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
• Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
• High-precision crossover network with 4th order Linkwitz-Riley filters
• Adjustable to a wide range of acoustic conditions
• Separately controlled limiter for low and high frequency overload protection
• Magnetic shielding allows placement near computer monitors
• “Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
• Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

PRICE PER UNIT

S3X-V

Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.

A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.

Reviews: "Wonderfully detailed...”

“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)

“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)