Single 460 mm (18 in) High Power Subwoofer. Approved by Lucasfilm, Ltd. for THX® system installations. Low Frequency Driver: 2241H Frequency Range: 25 Hz – 500 Hz (-10 dB) Power Capacity (Continuous Pink Noise): 600 Watts Power Capacity (Continuous Program): 1200 Watts Sensitivity: 98 dB SPL (1W, 1m, 3.3ft.) Crossover Frequency: 80-150 Hz recommended Nominal […]
Compact and affordable, Monitor XT30 high-performance, center channel loudspeaker maximizes the enjoyment of movies and gaming with clear, focused dialogue and dynamic, high-resolution, full-range sound.
Content
Single 460 mm (18 in) High Power Subwoofer.
Approved by Lucasfilm, Ltd. for THX® system installations.
Low Frequency Driver:
2241H
Frequency Range:
25 Hz - 500 Hz (-10 dB)
Power Capacity (Continuous Pink Noise):
600 Watts
Power Capacity (Continuous Program):
1200 Watts
Sensitivity:
98 dB SPL (1W, 1m, 3.3ft.)
Crossover Frequency:
80-150 Hz recommended
Nominal Impedance:
8 Ohms
Dimensions (HxWxD):
1010 x 674 x 450 mm (39 3/4 x 26 1/2 x 17 3/4 in)
Net Weight:
60 kg (131 lb)
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
Qty Included
1
Width
19.9" (48.3 cm)
Height
6.50" (16.6 cm)
Depth
8.13" (20.7 cm)
Weight
13lbs (5.9 kg)
Front Array Driver Complement
• (1) 1" (2.54 cm) Terylene Dome Tweeter
• (2) 5-¼" Bi-laminate Paper Woofers
Enclosure Type
Rear port
Lower and Upper -3dB Limits
77 Hz → 26,000 Hz
Sensitivity (1 watt @ 1 meter)
89dB SPL
Total Frequency Response
55 Hz → 40,000 Hz
Recommended Amplifier Power Per Channel
30 watts → 200 watts
Tweeter/Midrange Crossover Frequency
2500 Hz
Inputs
Single nickel-plated 5-way binding posts
CABINETRY
Available Finishes
Matte black
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive? Woofer.
Specifications:
Frequency Range
:
57 Hz - 20 kHz(-10 dB)
Frequency Response
:
75 Hz - 20 Hz (+/-3db)
Coverage Pattern
:
100 x 15 nominal
Crossover Modes
:
4 Ohms Bi-amp / passive,
externally switchable
Crossover Frequency
:
132 dB SPL peak 1.2 kHz
Power Rating2 (Continuous / Program / Peak)
:
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
System Maximum SPL
:
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
System Sensitivity (1w @ 1m
:
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
LF Driver
:
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps
HF Driver
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
Nominal Impedance
:
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
Active Tunings
:
Tunings available at www.jblpro.com
Enclosure
:
18 mm, 11-ply birch plywood
Suspension / Mounting
:
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
Finish
:
Black DuraFlex? finish
Grille
:
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
Input Connectors
:
Neutrik? Speakon? NL-4 (x2)
Dimensions (H x W x D)
:
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
Net Weight
:
21.8 kg (48 lb)
Optional Accessories
:
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
30 Hz - 20 kHz frequency range.
120W continuous program (60W cont. pink, 240W cont. peak).
90 dB sensitivity (1W/1m).
High-slope crossover network produces natural sound and even coverage.
Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.