JBL 4641 Subwoofer

Single 460 mm (18 in) High Power Subwoofer.
Approved by Lucasfilm, Ltd. for THX® system installations.

ME 120

Enclosure Bass reflex type
Power Handling Capacity Continuous pinknoise: 50W
Rated Impedance 6 ohms
Sensitivity 88dB (1W, 1m)
Frequency Response 60 ? 18,000Hz
Crossover Frequency ?
Speaker Component 16cm cone-type (magnetically shielded)
Input Terminals Screw terminals (compatible with a dual-banana plug),
gold plated
Finish Enclosure: MDF, black, paint Front grill: Cloth, black
Dimensions 170 (W) ? 264 (H) ? 194 (D) mm
Weight 3.6kg (per unit)
Mounting Brackets (option) WCB-12, WCB-31, CMB-31 

TOA HX-5 Array system

Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B 
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1

• 30 Hz - 20 kHz frequency range.
• 120W continuous program (60W cont. pink, 240W cont. peak).
• 90 dB sensitivity (1W/1m).
• High-slope crossover network produces natural sound and even coverage.
• Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.

This 2-way passive full range studio monitor loudspeaker which incorporates
an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency
transducer. The system's low frequency driver is mounted as a direct radiator
in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels.
The tuning port is located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure. The acoustically
transparent cloth grille system is detachable.

FEATURES:
2-way near/mid-field studio monitor
8" low frequency speaker
1" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
125 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:125 W
Program Power HandlingP:250 W
Peak Power HandlingK: >500 W
Recommended Amplifier:125 W to 250 W at 8 Ω
On-axis Frequency RangeF:38 Hz - 33 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI:3.2 Ω (at 15 kHz)
On-axis Sensitivity 1W / 1 mS: 89 dB SPL
Rated Peak SPL at Full Power: 116 dB
Nominal -6 dB BeamwidthsB:120° Horizontal
(average, 500 Hz to 8 kHz)    95° Vertical
Enclosure Material:MDF with Iroko wood side panels
Color:Black/Iroko wood
Connectors:Binding posts
Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in)
Mounting:2 x M6 points
Weight: 12.8 kg (28 lbs)
Shipping Weight: 14 kg (31 lbs)

JBL Control Contractor Series 26CT Ceiling Speaker The Control 26C is a powerhouse ceiling speaker containing a coaxially mounted
6.5" woofer and 3/4" titanium-coated tweeter, able to deliver maximum sound level
over a wide coverage area. The Control 26CT includes a multitap transformer for a
70V or 100V line distribution system.
Key Features:

�75 Hz to 20 kHz frequency range (-10 dB)

�140 watts continuous program power capacity

�89 dB sensitivity (1W/1m)

�16 ohms nominal impedance

�110° conical coverage (polar)

�Steel back-can with removable locking connector

�Control 26CT 70V taps: 60W, 30W, 15W, 7.5W

�Control 26CT 100V taps: 60W, 30W, 15W.

�Dimensions (height x diameter):  210 mm x 252 mm (8.3 in x 9.9 in)

�Net Weights:  Control 26C = 3.4 kg (7.5 lb), Control 26CT = 4.2 kg (10 lb)

�See Specifications PDF for more details