Content |
The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types.
Features : | | Specifications : | - Advanced technology component: Differential Drive®, dual voice coil, Direct Cooled™ cone transducer.
| - Independently accessible voice coils, enabling external parallel or series wiring.
| - Advanced construction techniques and hybrid materials provide exceptionally rigid, lightweight enclosure.
| - Rugged DuraFlex™ exterior finish; weatherized components Integrated S.A.F.E.™ suspension system: premium heat-treated alloys provide high-strength, reliable hanging arrays.
| - For ground-stacked or suspended applications in stand-alone arrays or in combination with other VERTEC® system products.
| | |
Frequency Range | : | 25 Hz - 160 Hz (-10dB) |
| Frequency Response | : | 34 Hz - 125 Hz (± 3 dB) |
| Continuous Power Rating | : | 2000W |
| Sensitivity | : | 91 dB, 1W / 1m (2.83 Vrms at 3.3 ft) |
| Nominal Impedances | : | 8 ohm |
| Dimensions (W x H x D) | : | 787 mm x 569 mm x 654 mm
(31 in x 22.4 in x 25.8 in) |
| Weight | : | 50.4 kg (111 lb) | | |
|
The SR-S4L is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 94 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | Dimensions | 160 (W) × 895 (H) × 255 (D) mm | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall mounting bracket: SR-WB4,
Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4,
Protection pad: SR-PP4, Floor stand: SR-FS4,
Digital processor: DP-0206 |
|
The SR-S4S is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | Dimensions | 160 (W) × 892 (H) × 303 (D) mm | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4,
Stand adapter: SR-SA4, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
The VT4882 is designed to deliver high quality soundreinforcement of sub-low frequencies for live music and a variety of sound reinforcement applications.
Features : | | Specifications : | - Advanced Technology Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers.
| - Advanced Construction Techniques with PlyMax® provide exceptionally rigid, lightweight enclosure.
| - Rugged DuraFlex™ exterior finish; Weatherized components.
| - Integrated Suspension System, premium aluminum fixtures provide rigid, reliable hanging arrays designed for vertical orientation at various angles.
| | |
Frequency Range | : | 28 Hz - 120 Hz (-10dB) |
| Frequency Response | : | 32 Hz - 110 Hz (± 3 dB) |
| Continuous Power Rating | : | 2000W |
| Sensitivity | : | 95 dB (1w/1m) |
| Nominal Impedances | : | 2 x 8 ohms |
| Dimensions (W x H x D) | : | 1013 mm x 457 mm x 858 mm
(39.9" x 18" x 33.8“) |
| Weight | : | 53.5 kg (118 lb) | | |
|
The SR-C15BWP Sub-woofer system is designed to be used in conjunction with the SR-C8LWP or SR-C8SWP Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 450 W | Rated Impedance | 8 Ω | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | Speaker Component | 38 cm (15“) cone-type | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“), 4-core cable, 3 m (9.84 ft) | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | Water Protection | IPX4 | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | Weight | 41 kg (90.39 lb) | Accessory | M8 connection bolt …4 | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
Features : | | Specifications : | - Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
| - JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
| - VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
| - Constant Curvature waveguide for unprecedented array coherence.
| - Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
| - Array Configuration Selector permist "array shading“.
| | |
Power Rating | : | 1750 Watts Peak
875 Watts Continuous |
| Frequency Range | : | 57 Hz - 20 kHz
(-10 dB) |
| Dimensions
(H x W x D) | : | 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in) |
| Frequency Response | : | 75 Hz - 20 Hz
(+/-3db) |
| Maximum Peak Output | : | 136 dB SPL at 1m |
| Coverage Pattern | : | 100 x 15 nominal |
| DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) | : | LF: 750 Watts, HF: 125 Watts |
| DPC-2 Output Sectoin | : | LF: Dual-Bridged Technology™, Class D |
| Autio Input Connector | : | XLR with loop through |
| LF Driver | : | 1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
| HF Driver | : | 3 x JBL 2408J, 38 mm (1.5 in) |
| User Controls | : | Input Attenuator (0-16 dB) |
| Signal Processings | : | DSP based, resident in Input Module |
| AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60 Hz |
| AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
| AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
| AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
| Enclosure | : | 25/15 mm, 11-ply birch plywood |
| Suspension / Mounting | : | Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
| Finish | : | Black DuraFlex™ finish |
| Grille | : | Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
| Net Weight | : | 24 kg (52 lb) |
| Optional Accessories | : | VRX-AF: Suspension array frame | | |
|
Reviews
There are no reviews yet.