JBL VT 4881A Compact Arrayable 1-18″ Subwoofer

4,586.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types. Features :   Specifications : Advanced technology component: Differential Drive®, dual voice coil, Direct Cooled™ cone transducer. Independently accessible voice coils, enabling external parallel […]

 

Read more

The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types.

Features :   Specifications :
  • Advanced technology component: Differential Drive®, dual voice coil, Direct Cooled™ cone transducer.
  • Independently accessible voice coils, enabling external parallel or series wiring.
  • Advanced construction techniques and hybrid materials provide exceptionally rigid, lightweight enclosure.
  • Rugged DuraFlex™ exterior finish; weatherized components Integrated S.A.F.E.™ suspension system: premium heat-treated alloys provide high-strength, reliable hanging arrays.
  • For ground-stacked or suspended applications in stand-alone arrays or in combination with other VERTEC® system products.
 
Frequency Range   :   25 Hz – 160 Hz (-10dB)
Frequency Response   :   34 Hz – 125 Hz (± 3 dB)
Continuous Power Rating   :   2000W
Sensitivity   :   91 dB, 1W / 1m (2.83 Vrms at 3.3 ft)
Nominal Impedances   :   8 ohm
Dimensions (W x H x D)   :   787 mm x 569 mm x 654 mm
(31 in x 22.4 in x 25.8 in)
Weight   :   50.4 kg (111 lb)

 

Weight 50.40 kg

Reviews

There are no reviews yet.

Be the first to review “JBL VT 4881A Compact Arrayable 1-18″ Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

JBL VT 4881A Compact Arrayable 1-18" Subwoofer removeTOA SR-C8S Line Array Speaker removeTOA SR-A12L 2-WAY LINE ARRAY,LONG DISTANCE removeRCF NX L23-A: 750 W, 12", 3x1", ACTIVE LINE ARRAY MODULE removeTOA SR-S4L 2-Way Line Array Speaker System removeTOA SR-C15B Line Array Speaker remove
NameJBL VT 4881A Compact Arrayable 1-18" Subwoofer removeTOA SR-C8S Line Array Speaker removeTOA SR-A12L 2-WAY LINE ARRAY,LONG DISTANCE removeRCF NX L23-A: 750 W, 12", 3x1", ACTIVE LINE ARRAY MODULE removeTOA SR-S4L 2-Way Line Array Speaker System removeTOA SR-C15B Line Array Speaker remove
Image
SKUVT 4881ASR-C8SSR-A12LNXL23ASR-S4LSR-C15B
Rating
Price 4,586.00 incl. GR VAT 2,458.98 incl. GR VAT 3,079.94 incl. GR VAT 2,557.50 incl. GR VAT 866.29 incl. GR VAT 2,241.15 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

In stock

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types.

Features :   Specifications :
  • Advanced technology component: Differential Drive®, dual voice coil, Direct Cooled™ cone transducer.
  • Independently accessible voice coils, enabling external parallel or series wiring.
  • Advanced construction techniques and hybrid materials provide exceptionally rigid, lightweight enclosure.
  • Rugged DuraFlex™ exterior finish; weatherized components Integrated S.A.F.E.™ suspension system: premium heat-treated alloys provide high-strength, reliable hanging arrays.
  • For ground-stacked or suspended applications in stand-alone arrays or in combination with other VERTEC® system products.
 
Frequency Range   :   25 Hz - 160 Hz (-10dB)

Frequency Response   :   34 Hz - 125 Hz (± 3 dB)

Continuous Power Rating   :   2000W

Sensitivity   :   91 dB, 1W / 1m (2.83 Vrms at 3.3 ft)

Nominal Impedances   :   8 ohm

Dimensions (W x H x D)   :   787 mm x 569 mm x 654 mm
(31 in x 22.4 in x 25.8 in)

Weight   :   50.4 kg (111 lb)

 

The SR-C8S is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.

Specification
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode)
Rated Impedance 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode)
Sensitivity 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode)
Frequency Response 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters)
Crossover Frequency 1,600 Hz (when driven with the optional DP-0206's recommended parameters)
Directivity Angle Horizontal: 110゜, Vertical: 15゜
Speaker Component Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2
Input Connector M5 screw terminal, distance between barriers: 12.2 mm (0.48)“
and Neutrik NL4MP × 2
Finish Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint
Dimensions 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“)
Weight 16 kg (35.27 lb)
Accessory M8 connection bolt …4
Option Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206

 

TOA SR-A Series Mid-Size Line Arrays feature TOAʼs proprietary "Synch-Drive" horn technology (pat. pending) to provide a uniform, high frequency sound field offering excellent sound clarity and minimal interference. Mid-high modules include the SR-A12L (long-throw) and the SR-A12S (short-throw) each with dual compression drivers and 12" low frequency driver. The SR-A18 subwoofer module features a heavy duty 18" low frequency driver rated at 720 Watts continuous power handling. Along with weather resistant models and multiple mounting hardware options, the SR-A Series Line Arrays are backed with a five year product warranty.

FEATURES:
  • Designed for wide bandwidth response - These compact and powerful 2-way modular speaker units can be used in multiple configurations as required to deliver greater output power with a more extended frequency response.
  • High-performance driver units - Each Type A Series speaker module contains a 30cm (12“) low frequency unit and a high-frequency horn attached to two compression drivers for greater output.
  • Wavefront control - The horn incorporates a proprietary phase wavefront control throat that functions to obtain the best possible performance from the high frequency drivers.
  • Adjustable sound coverage - Type A Series provides two speaker configurations designed for specific coverage characteristics, each having a different taper. The 5-degree taper is for effectively transmitting sound over distance while the 15-degree taper is optimized for excellent short range coverage.
  • Simple maintenance - Maintenance and servicing are made easier on the Type A Series to suit it for permanent installations. All driver replacement is possible from the speaker's rear, a simple and speedy procedure.
  • SR-A12L Long-throw enclosure (15°V x 90°H)
  • SR-A12S Short-throw enclosure (5°V x 90°H)
  • Components: Dual compression drivers. 12” low frequency driver. Power handling: 450 W (LF), 180 W (HF)
  • SR-A18 Subwoofer (Sold Seperately) 18” low frequency Power handling: 720 W
  • Five year warranty
General Specs:
Enclosure: ....... Bass Reflex Type
Power Handling Capacity: ....... Continuous Program: Low 450W, High 180W
Rated Impedance: ....... Low: 8 Ohms, High: 16 Ohms
Sensitivity: ....... Low: 98dB, High: 110dB both at 1W/1M
Frequency Response: ....... 50 Hz - 20kHz (When using DP-0206 Option)
Crossover Frequency: ....... 1000Hz (When using DP-0206 Option)
Directivity Angle: .......

Horizontal: 90 degrees
Vertical: 5 degrees

Speaker Component: ....... Low frequency: 30cm cone-type
High frequency: Wave front control horn 90° (horizontal) × 5° (vertical) + compression driver × 2
Input Connector: ....... M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x 2 (usable connector: Neutrik NL4FC)
Finish: Enclosure: ....... Plywood black, paint
Front Grill: ....... Punched steel plate, black, acrylic paint
Dimensions: ....... 740 (W) x 433 (H) x 467 (D) mm
Weight: ....... 49kg including accessories
Accessories: ....... Joint Plate x 2, Joint plate mounting bolt (M10) x 16
Option: ....... Rigging Frame: SR-RF12, Digital Processor: DP-0206

A very compact, active, two-way line array loudspeaker module that delivers extraordinary power handling, clarity, flexibility and great sound in a compact, easy to handle and affordable package.

The 750 Watt Class-D Digipro amplifier module accurately matches the high quality analogue signal input board with precise, complex filter response that result in the natural, detailed reproduction of the best radiating designs.
The NX L23-A is the ideal choice when line array performance is needed and a fast and easy set up is a must.

Features
750 Watt Digipro digital amplifier
133 dB max spl
100 x 15, Wide dispersion constant directivity angle
12" woofer, high power neodymium 3.5" voice coil
3 x 1" HF driver, titanium dome, neodymium 1.75" voice coil
PFC power factor correction

 

Acoustical Specifications
Frequency Response -3 dB:60 Hz÷ 20 kHz
Max SPL:133 dB 
Horizontal coverage angle:100° 
Vertical coverage angle:Max 15° 
Compression Driver:3 x 1" neo, 1.75" v.c. 
Woofer:12" neo, 3.5" v.c. 
INPUT/OUTPUT SECTION
Input signal:bal / unbal 
Input connectors:Combo xlr-jack 
Output connectors:xlr 
Input sensitivity:-2 dBu / +4 dBu 
PROCESSOR SECTION
Crossover frequencies:1300 Hz 
Protections:Thermal, rms 
Limiter:Soft peak limiter 
Controls:Volume, hf correction cluster size 
AMPLIFIER SPECIFICATIONS
Total power:750 Watts 
High frequencies:250 Watts 
Low frequencies:500 Watts 
Cooling:Convection / foced 
Connections:Powercon in / out 
CABINET
Cabinet Material:Balitc birch 
Hardware:Arry side fittings 
Handles:2 side 
Pole Mount/Cap:Yes 
Colour:Black 
PHYSICAL SPECIFICATIONS
Height:346 / 13.62 mm/inch 
Width:659 / 25.94 mm/inch 
Depth:415 / 16.33 mm/inch 
Net Weight:28.5 / 62.83 Kg/Lbs

 

The SR-S4L is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.

Specification
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode)
Rated Impedance 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode)
Sensitivity 94 dB (1 W, 1 m)
Frequency Response 70 - 20,000 Hz (when using DP-0206 (option))
Crossover Frequency 3,500 Hz
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24
Input Connector M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2
Finish Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 160 (W) × 895 (H) × 255 (D) mm
Weight 16 kg
Accessory Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1
Option Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall mounting bracket: SR-WB4,
Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4,
Protection pad: SR-PP4, Floor stand: SR-FS4,
Digital processor: DP-0206

The SR-C15B Sub-woofer system is designed to be used in conjunction with the SR-C8L or SR-C8S Line Array Speaker. Recommended digital processor is the DP-0206 (optional).

Specification
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 450 W
Rated Impedance 8 Ω
Sensitivity 93 dB (1 W, 1 m)
Frequency Response 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters)
Crossover Frequency 125 Hz (when driven with the optional DP-0206's recommended parameters)
Speaker Component 38 cm (15“) cone-type
Input Connector M5 screw terminal, distance between barriers: 12.2 mm (0.48“)
and Neutrik NL4MP × 2
Finish Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint
Dimensions 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“)
Weight 41 kg (90.39 lb)
Accessory M8 connection bolt …4
Option Rigging frame: SR-RF8
Digital processor: DP-0206

 

Weight50.40 kg16.00 kg50.00 kg30.00 kg16.00 kg41.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 50.40 kg
Weight 16.00 kg
Weight 50.00 kg
Weight 30.00 kg
Weight 16.00 kg
Weight 41.00 kg