| Content |
Features:
Two channel / four way split
Channels linkable for 1 in, 8 out
Ultra low noise design
?SilentSwitch? Phantom Power switch
?20 dB pad switch
0 to +40 dB Gain available via rear switches
Electronically Balanced Inputs and Outputs (standard)
Transformer Balanced Outputs option
12 VDC supply connector for remote or mobile applications
Intuitive, 'user friendly' layout
Flawless performance in any audio environment
Today?s venues face a growing need to provide a multiplicity of audio feeds
from presentations, conferences, orchestral performances and lectures. The
advent of digital broadcasting, the growth of webcasts and direct-to-CD
archiving highlight the deficiencies in audio splitting systems more than ever
before. Whether the final product is a broadcast feed or CD sales of an unrepeatable
lecture, performance or event, end-users? expectations of audio quality are
higher than ever.With these requirements in mind, ARX has developed the
MSX 8 Active Microphone/Line Splitter to deliver the performance required by
today?s standards of audio production. Active microphone and line splitting has
a number of benefits over passive splitters: primarily these are improved sound
quality, noise figures comparable to the best microphone inputs, and increased
resistance to RFI. All of which translate into superb audio quality for your clients.
About the MSX 8
The MSX 8 consists of two channels of actively buffered ultra low noise Microphone/
Line Splitter. Each of these channels has four electronically Balanced splits ? two
on the rear panel, plus two more on the front panel. All four output splits have the
option of transformer balancing if so specified.Each channel has a ?20 dB pad switch
plus silently switchable 48V Phantom power with indicator LED.Gain through the MSX 8
can be set individually by the small DIP switches on the rear of each channel, from 0dB
through to +40 dB in 10 dB stepsA ?Link? switch links Channel 1 to Channel 2, providing
an ultimate maximum of 8 Outputs from a single input. An indicator LED shows when this
is active. A Clip LED indicates imminent signal overload through the channel, and a
numbered marker panel on the front provides a space where individual channel connections
can be noted.For remote or mobile applications a 5 pin DIN connector on the rear panel
provides an access point to connect a 12V DC power supply
Inside Information
Internally, powerful RF input filtering removes both common mode and differential interference
at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components
throughout.Advanced user options include internally jumper linking Inputs to Main outputs, and
Ground lifting Output Pins 1as required.
Internal Power Supply
The MSX 8 has a low noise transformer based power supply to obtain the maximum benefit from
the ultra low noise design of the splitter circuitry.
Summing up, the feature packed MSX 8 is the answer wherever transparent signal buffering and
routing is required.
T E C H N I C A L S P E C I F I C A T I O N S
Signal / Noise Ratio -94dB
Distortion .008% 20Hz - 20KHz
Gain through unit Switchable 0, +10, +20, +30, +40 dB
Maximum Output +24dB
Pad Switch ?20dB attenuation
Gain Switch +20dB gain
Phantom Power +48VDC slow turn on/turn off
Output Impedance 100 Ohms Electronically Balanced
(Optional Transformer balancing available)
Clip LED 1dB before clipping
12 Volt Connector 5 pin DIN
AC Mains Input Fused IEC socket
AC Power 100-120VAC 2 amp, 220-240VAC 1 amp
Transformer Type Low noise toroidal
Size 19?W x 1??H x 6?D, 482 x 44 x 125 mm
Weight 5 lbs (2.2 Kg)
Front Panel
A and B balanced XLR Output splits Channels 1 and 2.
Pin 3?-, Pin 2 +, Pin 1 Ground
48V Phantom Power switch and LED
Channel link switch and LED switch
?20dB pad switch
Numbered marker panel for labelling individual channel
assigns
AC power LED
Rear Panel
Channel Gain DIP switches: 0, +10, +20, +30, +40dB
Balanced XLR Input Channels 1 and 2. Pin 3 ?, Pin 2 +,
Pin 1 Ground
Balanced XLR Main (FOH) Output (same wiring as Input)
Channels 1 and 2
Balanced XLR Monitor Output (same wiring as Input) Channels
1 and 2
12 Volt DC power supply input for remote or mobile applications
IEC 3 pin AC connector and integral fuseholder. Replace fuse with
correct value only: 100?120 V AC 2 amp, 220?240 V AC 1 amp | The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.
The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.
The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.
The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels. Features: - 1x6 Stereo Distribution Amp with Monitoring.
- 1 set of stereo (2) XLR inputs.
- 6 sets of stereo (2) XLR outputs.
- Input stage has LED level meter.
- Each output channel can be switched to mono.
- Each output channel can be individually monitored.
- Built-in headphone amp.
- Optional transformer balanced outputs.
- Electronically balanced inputs with individual left/right level controls.
- LED metering on input for balancing stereo material or two mono signals.
- Left / Right level controls on each output with a stereo / mono switch.
- Headphone jack to monitor output of selected channel.
- LED metering on output of selected channel.
- Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.
- 1 unit rack space.
- Inputs and Outputs are balanced XLRs at +4dBu.
|
About the DI6s
It's a fact of audio life that a lot of equipment that has to be connected to
professional audio systems isn't impedance or level compatible.
Interfaces Unlimited
Tape/cassette/DVD/CD decks, audio for video, drum machines, synthesizers,
bass guitars, computers; at some stage all these need linking up to Balanced
inputs, whether the application is Live sound, Studio or Broadcast.
To solve these problems, we've developed the DI-6s:
Six active D.I. (Direct Injection) boxes,
plus a 6 into 1 Line Mixer,
plus a 1 to 6 Splitter,
All of this in a compact, all steel 1 RU package.
A Pro Audio Toolbox
This unique and flexible audio toolbox allows Six independent unbalanced
audio sources to easily and quietly interface with Balanced pro audio systems,
either to individual channels or summed down to one Master output.
But that's not all. By pressing a single switch on the rear panel the DI6s will
change from being Direct Boxes and a Mixer to being a 6 way Splitter (line
distribution amplifier). Now it will split an incoming signal to 6 individual outputs
or zones.
On the front panel, each channel has 2 IN/OUT jacks, a level control from infinity
(off) through 0dB to +15dB gain, and a Clip indicator LED.The Master section has
a Master volume control and status LEDs indicating whether the unit is in DI or
Splitter mode. In addition, as on all ARX single rack unit equipment, each channel
has a numbered marker panel ('scribble strip') you can write on for easy confirmation
of channel assigns.
Balanced Outputs
On the rear, each channel has an XLR Balanced output, with associated Ground lift
switch and status LED, to isolate the chassis and electronic grounds.
The Master section has both Balanced XLR and Unbalanced Jack outputs. In addition
there is a Balanced XLR input with a switch to put the unit in either DI or Splitter mode.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the
unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and
voltage change switch.
With so many handy functions, plus a true 'user friendly' layout, it's no wonder people call
the DI-6s 'A total Audio Patching System in 1 RU!'
You'll never compromise on Quality when you choose ARX
Features
Unique Pro Audio problem solver
Six Direct boxes, Splitter and Line Mixer in one unit
Multi mode unit: Six in, Six out; Six in, One out; One in, Six out
Individual Output Ground lift switches
Up to +15dB Gain available per channel
Balanced XLR Outputs; High Impedance Jack Ins and Outs
Flawless performance in any audio environment
T E C H N I C A L S P E C I F I C A T I O N S
Channels 1 - 6
High Z Input Impedance 2.2 Meg Ohm
Max Channel Gain 15dB
Clip LED Illuminates 1dB prior to clip
Direct Output Impedance 300 ohms Balanced
Max Input Level +20dB
Max Output Level +21dB
Signal to Noise -96dB(unity gain)
Frequency Response 20Hz to 20KHz, ±0.5dB
Distortion < 0.004%, 1KHz, +4dB
Output Connector 3 pin XLR
Master Section
Output Impedance 300 Ohms Balanced
Max Output Level +21dB
Signal to Noise -90dB (unity gain)
Frequency Response 10Hz to 20KHz, ±0.5dB
Distortion < 0.004%, 1KHz, +4dB
Output Connector 3 pin XLR
Splitter Section
Maximum Level + 20dB
Input Impedance 20 KOhms, Balanced
Input Connector XLR
Frequency Response 10Hz?20KHz ±0.5dB
AC Power 100-120, 220-240 V AC, 8 VA
Size 19?W x 6?D x 1??H, 482 x 155 x 44mm
Weight 2.2 Kg (5 lbs)
Front Panel Controls
Hi Impedance (Hi Z) insulated jack Input and Output
connectors
Level control with up to +15dB of Gain available
Clip LED indicator
Marker panels for labelling DI assigns
Master Level controls
Rear Panel
Balanced XLR Outputs
Individual Audio Ground Lift switches and status LEDs
XLR and jack Master Outputs
XLR Input for splitter
Splitter/DI + Mixer mode switch
AC input connector, with voltage switch and fuse. | Overview
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs
Features
- XLR balanced ins and outs
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx® 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
Specifications
| Input Connectors |
XLR (pin 2 hot) |
| Input Type |
Electronically balanced/unbalanced, RF filtered |
| Input Impedance |
Balanced >50k ohm, unbalanced >25k ohm |
| Max Input |
>+22dBu balanced or unbalanced |
| CMRR |
>40dB, typically >55dB at 1kHz |
| Output Connectors |
XLR |
| Output Type |
Impedance-balanaced/unbalanced, RF filtered |
| Output Impedance |
Balanced 200 ohm, unbalanced 100 ohm |
| Max Output |
>+21dBu balanced/unbalanced into 2k ohms or greater |
| Bandwidth |
20Hz to 20kHz, +/-0.5dB |
| Frequency Response |
90 kHz, +0/-3 dB |
| Signal to Noise Ratio |
Ref: +4 dBu, 22 kHz measurement bandwidth |
| Signal-to-Noise (Stereo Mode) |
>94dB (Low Output), >91dB (High Output) |
| Signal-to-Noise (Mono Mode) |
>94dB (Low Output), >93dB (Mid Output), >91dB (High Output) |
| Dynamic Range |
> 106 dB, unweighted, any output |
| THD+Noise |
< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
| Interchannel Crosstalk |
< -80 dB, 20 Hz to 20 kHz |
| Crossover Frequencies (Stereo Mode) |
Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
| Crossover Frequencies (Mono Mode) |
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
| Crossover Filter Type |
Linkwitz-Riley, 24 dB/octave, state-variable |
| Low cut Switch |
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
| Phase Invert Switch |
Inverts the phase at the output, one switch per output. |
| x1 / x10 Switch |
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
| Mode Switch |
Selects stereo/mono and 2/3-way operation |
| LF Sum Switch |
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
| Indicators |
Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
| Operating Voltage |
100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ |
| Operating Temperature |
32°F to 113°F (0°C to 45°C) |
| Power Consumption |
15W |
| Power Connector |
IEC receptacle |
| Dimensions |
1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
| Unit Weight |
3.7 lbs. (1.7 kg) |
| Shipping Weight |
5.4 lbs. (2.5 kg) |
| More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.
XLR balanced ins and outs
Mode switches for mono 4-way or stereo 2-way/3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant
| Input Connectors |
XLR |
| Input Type |
Electronically balanced/unbalanced, RF filtered |
| Input Impedance |
Balanced >50k ohm, unbalanced >25k ohm |
| Max Input |
>+22dBu balanced or unbalanced |
| CMRR |
>40dB, typically >55dB at 1kHz |
| Output Connectors |
XLR |
| Output Type |
Impedance-balanaced/unbalanced, RF filtered |
| Output Impedance |
Balanced 200 ohm, unbalanced 100 ohm |
| Max Output |
>+21dBu balanced/unbalanced into 2k ohms or greater |
| Bandwidth |
20Hz to 20kHz, +/-0.5dB |
| Frequency Response |
90 kHz, +0/-3 dB |
| Signal to Noise Ratio |
Ref: +4 dBu, 22 kHz measurement bandwidth |
| Signal-to-Noise (Stereo Mode) |
>94dB (Low Output), >93dB (Mid Output), >90dB (High Output) |
| Signal-to-Noise (Mono Mode) |
>94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output) |
| Dynamic Range |
> 106 dB, unweighted, any output |
| THD+Noise |
| Interchannel Crosstalk |
| Crossover Frequencies (Stereo Mode) |
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting) |
| Crossover Frequencies (Mono Mode) |
Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz |
| Crossover Filter Type |
Linkwitz-Riley, 24 dB/octave, state-variable |
| Low cut Switch |
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
| Phase Invert Switch |
Inverts the phase at the output, one switch per output. |
| x1 / x10 Switch |
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
| Mode Switch |
Selects stereo/mono and 2/3/4-way operation |
| LF Sum Switch |
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
| Indicators |
Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
| Operating Voltage |
100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz |
| Operating Temperature |
32°F to 113°F (0°C to 45°C) |
| Power Consumption |
15W |
| Power Connector |
IEC receptacle |
| Dimensions |
1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
| Unit Weight |
4.0 lbs. (1.8 kg) |
| Shipping Weight |
5.8 lbs. (2.6 kg) |
| A passive dual channel line splitter that is mainly used to feed the left and right master outputs of a mixer into several inputs such as power amplifiers, recording machines etc. A specially designed audio frequency transformer maintains signal integrity and prevents ground loop hum. This unit also converts unbalanced signals into balanced signals and vice versa.
Technical specifications:
- 2 channel line splitter "1 into 3"
- Each channel with: Input: female XLR type with parallel male XLR Type output 2 transformer isolated male XLR type outputs
- Transformer ratio 1 : 1
- Nominal level: 0 dB
- Max. level +20 dB
- Nominal impedance input and output: 600 ohms
- Ground lift switch
Number of split-outputs per canal
2
Max. output level
+ 20 dB
Transformer isolated outputs
Yes
Cabinet material
Die-cast aluminium
Cabinet surface
Powder coated
|
Reviews
There are no reviews yet.