JBL JRX-225 2×15” 2-way Passive speaker 500W

567.99 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback. Features : Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for […]

 

Read more

The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback.

Features :

  • Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
  • JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
  • The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
  • Progressive TransitionTM high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
  • SonicGuardTM protects the highfrequency driver from excess power without interrupting the performance.
  • Non-resonant, all-steel handles are used.
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.

Specifications :

Power Rating   : 500 W / 2000 W

 

Frequency Range (-10 dB)   : 42 Hz – 18 kHz

 

Frequency Response (±3 dB)   : 62 Hz – 13 kHz

 

Sensitivity (1w/1m)   : 100 dB SPL

 

Nominal Impedance   : 4 ohms

 

Recommended Amplifier Power   : 500 W to 1000 W into 4 ohms

 

Maximum SPL   : 133 dB

 

Nominal Dispersion   : 90º x 50º

 

Crossover Frequency   : 2.2 kHz

 

Dimensions

(H x W x D)

  : 1092 mm x 464 mm x 432 mm
(43 in x 18.3 in x 17 in)

 

Weight   : 42.6 kg (94 lb)

 

High Frequency Driver   : JBL 2414H-C , 1″ exit compression driver mounted on Progressive TransitionTM Waveguide

 

Low Frequency Driver   : JBL M115-8A x 2

 

Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel

 

Grille   : 18-gauge, powder-coated steel
Weight 43.00 kg

Reviews

There are no reviews yet.

Be the first to review “JBL JRX-225 2×15” 2-way Passive speaker 500W”

Your email address will not be published. Required fields are marked *

Quick Comparison

JBL JRX-225 2x15'' 2-way Passive speaker 500W removeSAMSON dB500 2-Way Loudspeaker 500 Watts removeJBL AM 7315/95-WRX 3-Way Full-Range Passive Loudspeaker 1450W removeJBL AM 7315/64-WRC 3-Way Full-Range Passive Loudspeaker 1450W removeRCF ART 725 ΜΚ4 Passive Speaker 2 WAY 15" 700W removeTOA HS-150W Coaxial Array Speaker System 100W/8Ω remove
NameJBL JRX-225 2x15'' 2-way Passive speaker 500W removeSAMSON dB500 2-Way Loudspeaker 500 Watts removeJBL AM 7315/95-WRX 3-Way Full-Range Passive Loudspeaker 1450W removeJBL AM 7315/64-WRC 3-Way Full-Range Passive Loudspeaker 1450W removeRCF ART 725 ΜΚ4 Passive Speaker 2 WAY 15" 700W removeTOA HS-150W Coaxial Array Speaker System 100W/8Ω remove
Image
SKUJRX 225dB500AM 7315/95-WRXAM 7315/64-WRCART725 MK4HS-150W
Rating
Price 567.99 incl. GR VAT 392.45 incl. GR VAT 5,965.00 incl. GR VAT 5,438.00 incl. GR VAT 1,238.75 incl. GR VAT 393.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback. Features :
  • Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
  • JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
  • The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
  • Progressive TransitionTM high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
  • SonicGuardTM protects the highfrequency driver from excess power without interrupting the performance.
  • Non-resonant, all-steel handles are used.
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
Specifications :
Power Rating   : 500 W / 2000 W
 
Frequency Range (-10 dB)   : 42 Hz - 18 kHz
 
Frequency Response (±3 dB)   : 62 Hz - 13 kHz
 
Sensitivity (1w/1m)   : 100 dB SPL
 
Nominal Impedance   : 4 ohms
 
Recommended Amplifier Power   : 500 W to 1000 W into 4 ohms
 
Maximum SPL   : 133 dB
 
Nominal Dispersion   : 90º x 50º
 
Crossover Frequency   : 2.2 kHz
 
Dimensions (H x W x D)   : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in)
 
Weight   : 42.6 kg (94 lb)
 
High Frequency Driver   : JBL 2414H-C , 1" exit compression driver mounted on Progressive TransitionTM Waveguide
 
Low Frequency Driver   : JBL M115-8A x 2
 
Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel
 
Grille   : 18-gauge, powder-coated steel

 

The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.

The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.

Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον και ακραίες καιρικές
συνθήκες με επιπλέον αναβάθμιση 14 σημειων.
Πιστοποίηση IP56 κατά πρότυπο IEC 529.
Παράδοση κατόπιν παραγγελίας.
     

Frequency Range       :       38 Hz - 19 kHz (-10 dB)

Frequency Response       :       45 Hz - 17 kHz ( ± 3 dB)

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       10

Directivity Index (DI)       :       10 dB

Crossover Modes       :       Tri-amp / Bi-amp switchable

Passive Crossover Slopes       :       MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz

Transducer Power Rating (AES)       :       LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs

Long-Term System Power Rating (IEC)       :       LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs

Maximum SPL       :       LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)

System Sensitivity of Passive Sections 6       :       MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
 

 Ειδική έκδοση του AM 7315/64 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.

Ηχείο 3-Way Full-Range υψηλής ισχύος 1450W
κατασκευασμένο από πολύφυλλo ξύλο συμήδας
και επένδυση Duraflex. Απόκριση συχνοτήτων:
38 Hz - 20 kHz. Ευαισθησία: LF: 127dB-SPL cont
avg (133 dB peak) Tri-amp mode: MF: 133dBSPL
cont avg (139dB peak) HF: 135dB-SPL cont
avg (141dB peak) Bi-amp mode: MF/HF: 133dBSPL
cont avg (139dB peak) με woofer 15" 2265H
LF: 1000W (4000W peak), 2 hrs, 750 W (3000
W peak), 100 hrs JBL Differential Drive® διπλού
πηνίου 75mm (3-in). Driver μεσέων συχνοτή των
CMCD-82H 8" MF: 350 W (1400W peak), 2 hrs
με ενσωματωμένο περιστρεφόμενο κυματοδηγό
και 2432H driver υψηλών συχνοτήτων HF: 100
W (400 W peak), 2 hrs με στόμιο χοάνης 38mm
(1.5 in), πηνίο φωνής 75mm(3 in) και διασπορά
χοάνης. 60° x 40°. Δυνατοτητα διενίσχυσης/
τριενίσχυσης με διακόπτη. Διατίθεται και σε
λευκό χρώμα (-WH). Διαθέτει υποδοχές (13 x
M10) για eyebolts σε χρήση μόνιμων
εγκαταστάσεων (διατίθονται σαν option). Eπίσης
μπορεί να δεχτεί το Planar Array Frame kits PAF-
2K and PAF-3K για κρέμαση πολλαπλών ηχείων
(option). Χρήσεις: PA, θέατρα, Disco/Club,
Aμφιθέατρα, Αθλητικές Εγκαταστάσεις, θεματικά πάρκα κλπ.
Διαστάσεις ΥΠΒ 967 x 561 x 657 mm. Βάρος
45,8 κιλά.

  • 1.4" compression driver with 3" voice coil
  • 15" woofer, high power, 3.5" voice coil
  • 133 dB max spl
  • Input Power Rating: 650 W AES
ART 725 MK4 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 MK4 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors. Specifications Acoustical specifications Frequency Response (-10dB): 55 Hz ÷ 20000 Hz Max SPL @ 1m: 133 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° System Sensitivity: 99 dB Power section Crossover frequencies: 1400 Transducers Compression Driver: 1.4'' neo, 3.0'' v.c Nominal Impedance (Ohm): 8 ohm Input Power Rating: 110 W AES, 220 W PEAK Sensitivity (dB, 1W @ 1m): 109 dB, 1W @ 1m Woofer: 15'' neo, 3.5'' v.c Nominal Impedance (Ohm): 8 ohm Input Power Rating: 650 W AES, 1300 W PEAK Sensitivity (dB, 1W @ 1m): 98 dB, 1W @ 1m Input/Output section Input connectors: Speakon Output connectors: Speakon Standard compliance CE marking: Yes Physical specifications Cabinet/Case Material: PP Composite Hardware: 2 x M10 Handles: 1 Top, 2 Side Pole mount/Cap: Yes Grille: Steel Color: Black Size Height: 708 mm / 27.87 inches Width: 437 mm / 17.2 inches Depth: 389 mm / 15.31 inches Weight: 20.5 kg / 45.19 lbs Shipping informations Package Height: 725 mm / 28.54 inches Package Width: 550 mm / 21.65 inches Package Depth: 505 mm / 19.88 inches Package Weight: 23.7 kg / 52.25 lbs

 

 

Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.

 

Product Specifications
  • Enclosure: Sealed type
  • Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
  • Rated Impedance: 8 Ω
  • Sensitivity: 98 dB (1 W, 1 m)
  • Frequency Response: 70 - 20,000 Hz
  • Crossover Frequency: 3 kHz
  • Directivity Angle: Horizontal: 90゜, Vertical: 40゜
  • Speaker Component: Low frequency: 38 cm (15) cone-type
  • Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
  • Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
  • Finish: Enclosure: Polypropylene, White
  • Punched net: Surface-treated steel plate, White
  • Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
  • Weight: 12 kg (26.46 lb)
Weight43.00 kg10.00 kg48.50 kg48.50 kg22.00 kg12.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 43.00 kg
Weight 10.00 kg
Weight 48.50 kg
Weight 48.50 kg
Weight 22.00 kg
Weight 12.00 kg