JBL JRX-225 2×15” 2-way Passive speaker 500W

567.99 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback. Features : Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for […]

 

Read more

The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback.

Features :

  • Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
  • JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
  • The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
  • Progressive TransitionTM high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
  • SonicGuardTM protects the highfrequency driver from excess power without interrupting the performance.
  • Non-resonant, all-steel handles are used.
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.

Specifications :

Power Rating   : 500 W / 2000 W

 

Frequency Range (-10 dB)   : 42 Hz – 18 kHz

 

Frequency Response (±3 dB)   : 62 Hz – 13 kHz

 

Sensitivity (1w/1m)   : 100 dB SPL

 

Nominal Impedance   : 4 ohms

 

Recommended Amplifier Power   : 500 W to 1000 W into 4 ohms

 

Maximum SPL   : 133 dB

 

Nominal Dispersion   : 90º x 50º

 

Crossover Frequency   : 2.2 kHz

 

Dimensions

(H x W x D)

  : 1092 mm x 464 mm x 432 mm
(43 in x 18.3 in x 17 in)

 

Weight   : 42.6 kg (94 lb)

 

High Frequency Driver   : JBL 2414H-C , 1″ exit compression driver mounted on Progressive TransitionTM Waveguide

 

Low Frequency Driver   : JBL M115-8A x 2

 

Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel

 

Grille   : 18-gauge, powder-coated steel
Weight 43.00 kg

Reviews

There are no reviews yet.

Be the first to review “JBL JRX-225 2×15” 2-way Passive speaker 500W”

Your email address will not be published. Required fields are marked *

Quick Comparison

JBL JRX-225 2x15'' 2-way Passive speaker 500W removeYAMAHA C-215V 2-WAY Loudspeaker 1000W removeELECTRO VOICE ZX5-60PI SPEAKER 2 WAY 600W removeELECTRO VOICE ZX5-90PI SPEAKER 2 WAY 600W removeAdamson SX-18 - Professional 3 way active speaker removeTOA HS-150W Coaxial Array Speaker System 100W/8Ω remove
NameJBL JRX-225 2x15'' 2-way Passive speaker 500W removeYAMAHA C-215V 2-WAY Loudspeaker 1000W removeELECTRO VOICE ZX5-60PI SPEAKER 2 WAY 600W removeELECTRO VOICE ZX5-90PI SPEAKER 2 WAY 600W removeAdamson SX-18 - Professional 3 way active speaker removeTOA HS-150W Coaxial Array Speaker System 100W/8Ω remove
Image
SKUJRX 225H000.00086001984001987SX-18HS-150W
Rating
Price 567.99 incl. GR VAT 1,008.00 incl. GR VAT1,227.20 incl. GR VAT1,227.20 incl. GR VAT 5,367.43 incl. GR VAT 426.99 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback. Features :
  • Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
  • JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
  • The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
  • Progressive TransitionTM high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
  • SonicGuardTM protects the highfrequency driver from excess power without interrupting the performance.
  • Non-resonant, all-steel handles are used.
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
Specifications :
Power Rating   : 500 W / 2000 W
 
Frequency Range (-10 dB)   : 42 Hz - 18 kHz
 
Frequency Response (±3 dB)   : 62 Hz - 13 kHz
 
Sensitivity (1w/1m)   : 100 dB SPL
 
Nominal Impedance   : 4 ohms
 
Recommended Amplifier Power   : 500 W to 1000 W into 4 ohms
 
Maximum SPL   : 133 dB
 
Nominal Dispersion   : 90º x 50º
 
Crossover Frequency   : 2.2 kHz
 
Dimensions (H x W x D)   : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in)
 
Weight   : 42.6 kg (94 lb)
 
High Frequency Driver   : JBL 2414H-C , 1" exit compression driver mounted on Progressive TransitionTM Waveguide
 
Low Frequency Driver   : JBL M115-8A x 2
 
Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel
 
Grille   : 18-gauge, powder-coated steel

Club Series V
Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon® and ¼" connectors. Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.

Yamaha has a long history of both making and reproducing music. The Club series V loudspeakers represent the latest in our continuing effort to provide the professional features and sound quality you've come to expect and deserve.

Built in the United States, these loudspeakers are designed to provide years of service. high power handling and excellent response have made Club Series loudspeakers the perfect choice for more than 16 years. Whether playing in a band, DJing, orupgrading the sound system at your church or school, with an expanded lineup of over twenty models to choose from, you're sure to find the right loudspeaker. Have a look at what goes into their construction -- Cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Another great benefit of this material is its environmental friendliness. Made from southern yellow pine, this material is both abundant and quickly renewable. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of one ten thousandth of an inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. Whether covered in durable carpet or the elastomeric spray coating, heavy steel handles and sturdy pole sockets make moving and positioning easy.

The drivers, or speakers in these cabinets, are custom made my Eminence Speaker Corporation® to Yamaha's exacting tolerances. Woofers share design features like high strength curvilinear cones and Dupont KaptonTM voice coil formers. Oxygen-free copper voice coils and oversize strontium ferrite magnets are also used to provide high power handling and long life. The 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex and help dissipate heat. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90° x 40° custom designed CD (constant directivity) horn with excellent dispersion and response.

Crossover networks that divide the signal going to the woofer and compression driver are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.

Connections on these loudspeakers are dual Neutrik Speakon® ¼ jacks for the highest possible strength and current capacity. Two of each connector makes it easy to "daisy chain," or add speakers.

Club V loudspeakers with the C prefix are coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to the carpeted S versions, they can easily fit any decor. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance.

C215V
Two 15" cast frame woofers
2000-watt peak power handling
90 x 45 degree CD horn
Perfect where high sound pressure levels are required

Features:

  • Tough, paintable exterior coating
  • Dual cast-frame 15" drivers
  • Frequency response: (-10dB) 42Hz - 16kHz
  • 1,000W program handling, 2,000W peak
  • Sensitivity: 99dB
  • 20“W x 46“H x 24“D
  • 101 lbs.
 
Woofer Tweeter
(diaphragm)
Freq
Resp
(-10dB)
Power
Handling
(noise 1 /
program/peak)
Sen-
sitivity
Max.
SPL 3
Dims.
(WxHxD) 2
Wt. 2
(lbs)
15" (2) 2" titanium 42Hz-
16kHz
500/1000/2000 99dB 132dB 20x46x24 101.0

The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18

The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18“)

Description:

The SX18 is a switchable 3 way active, 2 way passive, arrayable loudspeaker. Designed to be used as the main enclosure for small to mid-sized venues or as a supplemental cabinet for large scale sound reinforcement, this enclosure provides high sound pressure levels in a small, lightweight package. Adamson?s Proprietary Kevlar drivers and internal crossovers are employed throughout the SX18 enclosure and its integral fly hardware makes installation of the product fast and effective. Moving the SX18 is easy and efficient with the supplied dolly board. A flexible, high powered enclosure, the SX18 is suited for a wide variety of applications.

Applications:

Live Concert Reproduction
Side Fill Monitoring
Near Field Applications
Theatres
Houses of worship
Dance Clubs

Features:

Kevlar 18" bass and 10" midrange Drivers
1.5" High Frequency Compression Driver
2-Way Bi-Amp/3-Way Tri-amp Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points
Supplied Dolly Board
Durable, Dual Component Finish
Honeycomb Punched, Steel Grille
Roadworthy Construction

Weight: 67 kg

 

 

Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.

 

Product Specifications
  • Enclosure: Sealed type
  • Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
  • Rated Impedance: 8 Ω
  • Sensitivity: 98 dB (1 W, 1 m)
  • Frequency Response: 70 - 20,000 Hz
  • Crossover Frequency: 3 kHz
  • Directivity Angle: Horizontal: 90゜, Vertical: 40゜
  • Speaker Component: Low frequency: 38 cm (15) cone-type
  • Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
  • Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
  • Finish: Enclosure: Polypropylene, White
  • Punched net: Surface-treated steel plate, White
  • Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
  • Weight: 12 kg (26.46 lb)
Weight43.00 kg47.20 kg22.20 kg22.20 kg67.00 kg12.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 43.00 kg
Weight 47.20 kg
Weight 22.20 kg
Weight 22.20 kg
Weight 67.00 kg
Weight 12.00 kg