Content |
The WM-5320A wireless microphone has been manufactured for use with a UHF system. It incorporates a cardioid pick-up pattern and has been designed for use in speech reinforcement applications. The built-in compressor-expander circuit minimizes the influence from ambient noise. It's gooseneck can be adjusted to any desired angle to facilitate use. The WM-5320A also features the function to protect it from the user's sweat.
Case
Modulation | Frequency modulation | Frequency Range | 636 - 865 MHz*, UHF | Channel Selectable | 64 channels (the number of channels may differ from country to country) | RF Carrier Power | 50 mW or less | Tone Frequency | 32.768 kHz | Oscillator | PLL synthesized | Maximum Input Level | 120 dB SPL | Battery | LR6 (AA) | Battery Life | 10 hours or more (alkaline) | Indicator | Power/Battery lamps | Antenna | Built-in type | Finish | Resin, coating | Dimensions | 62 (W) × 102.5 (H) × 23 (D) mm | Weight | 90 g (with battery) |
Headset
Microphone Element | Electret condenser microphone, cardioid | Cable Length | 1.4 m | Connector | φ3.5 plug (EIAJ RC701) | Accessory | Waist pouch……1, Screw driver……1 |
---|
|
LD Systems ECO 2X2 BPH 1
Wireless Microphone System with 2 x Belt Pack and 2 x Headset
Set composed of: - 1 x LDWSECO2X2R2
- 1 x LDWSECO2BP2
- 1 x LDWSECO2BP4
- 2 x LDWS100MH1
2 Channel Diversity UHF Wireless Set with 2 x Headset Microphone
LD Systems ECO Sets are the perfect introduction to wireless audio transmission: All components guarantee optimal audio delivery via professional outputs. The extensive features of the LD WS ECO Series Sets are remarkable in this price category.
The frequency band of 863 - 865 MHz permits operation in most EU countries with no registration or licensing required.
- 2 channel UHF PLL Diversity Wireless System
- Headset version
- Belt Pack with 3 Gain settings and Mute function
- Long battery life
- Great operating distance (50 m open field)
- 2 fixed frequencies: 863.100 MHz and 864.500 MHz
Product type
Wireless Microphone Systems
Transmission frequency range
863.1 MHz , 864.5 MHz
LDWS100MH1 - LD Systems WS 100 MH 1 Headset
Product type
Wireless Microphone System Accessories
Nominal impedance
680 Ohm(s)
Frequency response
20 - 20.000 Hz
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
LDWSECO2BP1 - LD Systems ECO 2 BP 1 Belt Pack Transmitter
Inputs
Mini-XLR (3-pin) with phantom power (for headset)
Frequency response
60 - 16.000 Hz
Rated HF output power
10 mW
Operating time
>10 h (with alkaline batteries)
Other features
incl. batteries
Controls
power (on/off/mute)
Indicators
battery status
Operating voltage
2 x AA battery
LDWSECO2X2R1 - LD Systems ECO 2X2 R 1 Double Receiver
Antenna connector
fixed to housing
Signal-to-noise ratio
> 105 dB
Audio output, balanced
2 x XLR
Audio mix output, unbalanced
6.3 mm Jack
Operating voltage
External Power Supply
Accessories (included)
power supply
|
General
Product type
Wireless Microphone Systems
Transmission frequency range
584 - 608 MHz
Items in this set
LD Systems U505 BP Bodypack transmitter
Product type
Wireless Microphone System Accessories
Transmission frequency range
584 - 608 MHz
Frequency response
30 - 16000
Channels
96 (8 groups of 12 channels)
Signal-to-noise ratio
>90 dB
Rated HF output power
Variable (2mW, 10mW, 30mW)
Controls
2 x arrow keys (up/down value entry), Power On/Off, Set
Operating voltage
2 x AA battery
Operating time
>10 h (with alkaline batteries)
Other features
detachable antenna, IR frequency synchronisation, Pilot tone squelch, switchable gain, switchable gain, switchable RF power
LD Systems U505 R Receiver
Product type
Wireless Microphone System Accessories
Transmission frequency range
584 - 608 MHz
Frequency response
30 - 16000
Channels
96 (8 groups of 12 channels)
Signal-to-noise ratio
> 100 dB
Total Harmonic Distortion (THD)
< 0.3 %
Controls
digital encoder, Power On/Off, volume
Audio output, balanced
XLR
Operating voltage
12 - 18 V DC
Audio output, unbalanced
6.3 mm jack
Accessories (included)
2 x antenna, Audio cable, power adapter
Max. output level
+10 dBu
Other features
channel search function, IR frequency synchronisation, Pilot tone
Operating voltage
12 V DC, 500 mA
LD Systems WS 100 Series Headset beige-coloured
Product type
Wireless Microphone System Accessories
Frequency response
70 - 16.000
Nominal impedance
1400 Ohm(s)
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
|
Designed for Club Sound, House of Worship, Performance & Sports Venues, and other applications.
ClearScan finds the clearest channel available with the touch of one button
EZsync infrared channel transfer from the receiver to the transmitter for easy and error-free setup
14 hour battery life from two AA alkaline batteries
Rugged metal transmitters with backlit LCD display and battery gauge
32 preset channels, with compatible groups of 8 channels for simultanious use
Bodypack with TA4 connector – compatible with all Electro-Voice lapel and headworn microphones for easy upgrades
Detachable half-wave receiver TNC antennas allow for use with the APD4+ antenna distribution system
Metal receiver chassis with optional rack mount ears and front mount antenna cables
HM-3 Omni-directional headworn for clear, constant vocals
Antennas Flexible TNC 1/2 Wave
Audio Frequency Response 80 Hz - 18kHz +/-2dB
Balanced Line Level Output (RMS Adjustable) 10 - 100 mV
Battery Life 14 hours with (2) AA alkaline typical
Case Material metal
Connector Type 1/4 inch unbalanced, 3-pin XLR balanced
Controls on/off, Set, Up, Down, Sync
Distortion (@ 1 kHz, 40 kHz deviation) Less than 1.0, 0.4 typical %
Diversity True Antenna
Dynamic Range greater than 95 dB
Element HM-3 Omni-directional headworn
Element PL22 Cardioid Dynamic
Number of Channels 32 per band, 8 Simultaneous
Power Supply 12 VDC, 500mA max
Receiver Type Synthesized PLL Agile UHF
RF Frequency Range 16 MHz
RF Output 8 mW typical
RF Sensitivity (12 dB SINAD) less than 1.0 uV
Signal-to-Noise Ratio (A-weighted) greater than 100 dB
Squelch Tone code plus Amplitude
|
Hands-free performance. High flexibility for those willing to go a step further. XS WIRELESS 2 grows with your demands by offering an intuitive LCD display for more manual options and 12 compatible channels in a stable UHF band, withstanding tougher live stage conditions.
The XS WIRELESS 2 HEADMIC SET is an easy to use all-in-one wireless system for singers and performers, excellent for live sound that involves dancing and singing all at the same time. Metal receiver housing and rackmount kit included.
FEATURES
- Lightweight headmic for hands-free operation and compact bodypack transmitter
- True diversity receiver with metal housing
- External antennas
- Automatic frequency management and synchronization via remote channel for easy setup
- Fully tunable over a wide range of UHF frequencies
- Rackmount kit included
- Up to 12 compatible channels
- Microphone condenser
- Frequency response 50 to 16,000 Hz (–3 dB)
- THD, total harmonic distortion ≤ 0.9%
- Pick-up pattern cardioid
- Signal-to-noise ratio ≥ 103 dBA
- RF output power 10 mW
- Switching bandwidth up to 24 MHz
- Modulation wideband FM
- Output voltage 1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu
- Diversity reception True Diversity
- Frequency 8 frequency banks, each with up to 12 factory-preset channels
- Frequency range A: 548-572 MHz, GB: 606-630 MHz, B: 614-638 MHz, C: 766-790 MHz, D: 794-806 MHz, E: 821-832 MHz, 863-865 MHz, K: 925-937.5 MHz
- Sensitivity
- Squelch switchable from 3 dBμV to 28 dBμV (via Pilot Tone)
- Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization)
- Adjustment Range Transmitter 0 to -30 dB, adjustable in 10 dB steps
- Audio adjustment range 40 dB, adjustable in 5-dB steps
- Line / Mic level 20 dB, switchable
- Temperature Range operation: 0°C to +40°C, storage: –20°C to +70°C
- Receiver Principle double superheterodyne
WHAT'S IN THE BOX?
- 1 receiver EM-XSW 2
- 1 bodypack transmitter SK-XSW
- 1 headset microphone ME 3-II
- 1 power supply NT 12-5 CW
- 2 AA batteries
- 1 rackmount kit
- 1 pouch
- user manual
TECHNICAL DATA
Receivers
- Dimensions approx. 200 x 42 x 127 mm
- Weight approx. 680g
- Power supply 12 V DC nom. / 300 mA
- Housing Metal
- AF frequency response 50 to 16,000 Hz (–3 dB)
Transmitter
- Dimensions approx. 71 x 96 x 28 mm
- Weight approx. 95g
- Operating time approx. 10 hrs
- Power supply 2 AA size batteries, 1.5 V
- Housing robust ABS
- AF frequency response 50 to 16,000 Hz
|
Evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. ew D1 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission. |
Reviews
There are no reviews yet.