The WM-5320A wireless microphone has been manufactured for use with a UHF system. It incorporates a cardioid pick-up pattern and has been designed for use in speech reinforcement applications. The built-in compressor-expander circuit minimizes the influence from ambient noise. It's gooseneck can be adjusted to any desired angle to facilitate use. The WM-5320A also features the function to protect it from the user's sweat.

User's manual (Receiver)
User's Manual (Transmitter)

LD Systems ECO 2X2 BPH 1
Wireless Microphone System with 2 x Belt Pack and 2 x Headset

Set composed of:

• 1 x LDWSECO2X2R2
• 1 x LDWSECO2BP2
• 1 x LDWSECO2BP4
• 2 x LDWS100MH1

    Designed for Club Sound, House of Worship, Performance & Sports Venues, and other applications.
    ClearScan finds the clearest channel available with the touch of one button
    EZsync infrared channel transfer from the receiver to the transmitter for easy and error-free setup
    14 hour battery life from two AA alkaline batteries
    Rugged metal transmitters with backlit LCD display and battery gauge
    32 preset channels, with compatible groups of 8 channels for simultanious use
    Bodypack with TA4 connector – compatible with all Electro-Voice lapel and headworn microphones for easy upgrades
    Detachable half-wave receiver TNC antennas allow for use with the APD4+ antenna distribution system
    Metal receiver chassis with optional rack mount ears and front mount antenna cables
    HM-3 Omni-directional headworn for clear, constant vocals

Antennas    Flexible TNC 1/2 Wave
Audio Frequency Response    80 Hz - 18kHz +/-2dB
Balanced Line Level Output (RMS Adjustable)    10 - 100 mV
Battery Life    14 hours with (2) AA alkaline typical
Case Material    metal
Connector Type    1/4 inch unbalanced, 3-pin XLR balanced
Controls    on/off, Set, Up, Down, Sync
Distortion (@ 1 kHz, 40 kHz deviation)    Less than 1.0, 0.4 typical %
Diversity    True Antenna
Dynamic Range    greater than 95 dB
Element    HM-3 Omni-directional headworn
Element    PL22 Cardioid Dynamic
Number of Channels    32 per band, 8 Simultaneous
Power Supply    12 VDC, 500mA max
Receiver Type    Synthesized PLL Agile UHF
RF Frequency Range    16 MHz
RF Output    8 mW typical
RF Sensitivity (12 dB SINAD)    less than 1.0 uV
Signal-to-Noise Ratio (A-weighted)    greater than 100 dB
Squelch    Tone code plus Amplitude

Hands-free performance. High flexibility for those willing to go a step further. XS WIRELESS 2 grows with your demands by offering an intuitive LCD display for more manual options and 12 compatible channels in a stable UHF band, withstanding tougher live stage conditions. The XS WIRELESS 2 HEADMIC SET is an easy to use all-in-one wireless system for singers and performers, excellent for live sound that involves dancing and singing all at the same time. Metal receiver housing and rackmount kit included. FEATURES

• Lightweight headmic for hands-free operation and compact bodypack transmitter
• True diversity receiver with metal housing
• External antennas
• Automatic frequency management and synchronization via remote channel for easy setup
• Fully tunable over a wide range of UHF frequencies
• Rackmount kit included
• Up to 12 compatible channels
• Microphone condenser 
• Frequency response 50 to 16,000 Hz (–3 dB) 
• THD, total harmonic distortion ≤ 0.9% 
• Pick-up pattern cardioid 
• Signal-to-noise ratio ≥ 103 dBA 
• RF output power 10 mW 
• Switching bandwidth up to 24 MHz 
• Modulation wideband FM 
• Output voltage 1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu 
• Diversity reception True Diversity 
• Frequency 8 frequency banks, each with up to 12 factory-preset channels 
• Frequency range A: 548-572 MHz, GB: 606-630 MHz, B: 614-638 MHz, C: 766-790 MHz, D: 794-806 MHz, E: 821-832 MHz, 863-865 MHz, K: 925-937.5 MHz 
• Sensitivity
• Squelch switchable from 3 dBμV to 28 dBμV (via Pilot Tone) 
• Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization) 
• Adjustment Range Transmitter 0 to -30 dB, adjustable in 10 dB steps 
• Audio adjustment range 40 dB, adjustable in 5-dB steps 
• Line / Mic level 20 dB, switchable 
• Temperature Range operation: 0°C to +40°C, storage: –20°C to +70°C 
• Receiver Principle double superheterodyne 

• 1 receiver EM-XSW 2
• 1 bodypack transmitter SK-XSW
• 1 headset microphone ME 3-II
• 1 power supply NT 12-5 CW
• 2 AA batteries
• 1 rackmount kit
• 1 pouch
• user manual

• Dimensions approx. 200 x 42 x 127 mm 
• Weight approx. 680g 
• Power supply 12 V DC nom. / 300 mA 
• Housing Metal 
• AF frequency response 50 to 16,000 Hz (–3 dB) 

• Dimensions approx. 71 x 96 x 28 mm 
• Weight approx. 95g 
• Operating time approx. 10 hrs 
• Power supply 2 AA size batteries, 1.5 V 
• Housing robust ABS 
• AF frequency response 50 to 16,000 Hz 

Evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. ew D1 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission.