Content |
The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to our 900 Series and the 560A continues that tradition.
Featuring the same switch-selectable OverEasy? and Hard Knee compression curves as our industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! It’s also versatile enough to go from subtle compression to "brick wall" peak limiting. |
Wireless 5.8 GHz Stereo Transmitter
- For wireless transmission of a stereo audio signal
- Maximum range: 30 m
- One transmitter can be paired with up to 8 receivers
- Inputs: 2x XLR female or 2x 6.3 mm jack (unbalanced)
- Switch for mono/stereo operation
- Volume control
- Dimensions without antenna (L x W x H): 115 x 105 x 45 mm
- Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
|
Κάρτα 4άρων εισόδων για BLU-800, BLU-320, BLU-160 & BLU-120 με δυνατότητα Echo cancellation. |
Wireless 5.8 GHz Stereo Receiver
- For wireless transmission of a stereo audio signal together with the
- Maximum range: 30 m
- One transmitter can be paired with up to 8 receivers
- Outputs: 2x XLR male or 2x 6.3 mm jack (unbalanced)
- Volume control
- Dimensions without antenna (L x W x H ): 110 x 105 x 45 mm
- Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
|
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function |
Four channel expander/gate |
Number of Channels |
4 |
Inputs |
4 x XLR, 4 x TRS 1/4" phone |
Output |
4 x XLR, 4 x TRS 1/4" phone |
Maximum Input Level |
+21dBu |
Compression Threshold |
Not applicable |
Compression Ratio |
Not applicable |
Attack Time |
Not applicable |
Release Time |
Not applicable |
Gate Threshold |
0 to -80dB |
Gate Rate |
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable |
Maximum Output Level |
+21dBu |
Make-up Gain |
Not specified by manufacturer |
Frequency Response |
18HZ to 30kHz |
Dynamic Range |
Not specified by manufacturer |
Noise |
>95dBu, unweighted, 22Hz to 22kHz |
Dimensions |
1U rack mount, 8 1/2" deep |
Specialties |
Unit will operate at either +4dB or -10 dB |
|
The dbx 580 Microphone Preamp is the perfect partner to your microphones, providing sonically-transparent gain that will reveal the detail and audio signature of even the most esoteric microphones. It will transform their low level output signal to a high level, high current output for direct connection to the line level inputs of your mixer, sampler or any other recording medium that accepts line level, analog input. |
Reviews
There are no reviews yet.