| Content |
The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to our 900 Series and the 560A continues that tradition.
Featuring the same switch-selectable OverEasy? and Hard Knee compression curves as our industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! It’s also versatile enough to go from subtle compression to "brick wall" peak limiting. | WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
| Power Supply |
AC 9V-500 mA 50/60 Hz |
| Frequency |
2404-2476MHz |
| Channel |
25 |
| Modulation/Demodulation |
GFSK |
| Receive Sensitivity (WDR 24) |
-84dBm (min.) |
| Transmitted Power (WDT 24) |
6 dBm |
| Output Level (WDR 24) |
+13dBu (BAL max.) |
| Input Level (WDT 24) |
+5dBu (max.) |
| Bandwidth |
>=1.8 MHz |
| Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
| S/N |
>80 dB |
| Dynamic Range @ 1 kHz |
>90 dB |
| Crosstalk @ 1kHz |
>90 dB |
| THD |
|
|
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
| Function |
Four channel expander/gate |
| Number of Channels |
4 |
| Inputs |
4 x XLR, 4 x TRS 1/4" phone |
| Output |
4 x XLR, 4 x TRS 1/4" phone |
| Maximum Input Level |
+21dBu |
| Compression Threshold |
Not applicable |
| Compression Ratio |
Not applicable |
| Attack Time |
Not applicable |
| Release Time |
Not applicable |
| Gate Threshold |
0 to -80dB |
| Gate Rate |
Attack: Program dependant
Hold: 0 to 4 sec, variable
Release: 50ms to 4 sec, variable |
| Maximum Output Level |
+21dBu |
| Make-up Gain |
Not specified by manufacturer |
| Frequency Response |
18HZ to 30kHz |
| Dynamic Range |
Not specified by manufacturer |
| Noise |
>95dBu, unweighted, 22Hz to 22kHz |
| Dimensions |
1U rack mount, 8 1/2" deep |
| Specialties |
Unit will operate at either +4dB or -10 dB |
|
Κάρτα τεσσάρων εξόδων line για τα BLU-80, BLU-32, BLU-16.
|
An elegant slim-line device contains all the functions required by a system for distributing different musical programmes in homes for multi-room sound systems and commercial premises.
Three different musical programmes and one for paging can be transmitted in five mono zones, or alternatively four zones, one of which is in stereo. It is also possible to extend the number of zones to ten using a simple connector to interlink two systems. The system has five amplified 20 W / 4 ohm outputs. For each of the five zones, a direct auxiliary input is available for connecting sources such as CD players or mixers to be used exclusively for one zone/room.
The back-lit display and function keys make it possible to access all the menus for configuring and adjusting the system: Volume, Tone, Loudness, Output settings, VOX.
| Features |
|---|
| 3 Music Source Inputs individually selectable to each output | | One Input Source with Override facility (Jukebox or Auto Announcer) | | 5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones | | Can be expanded interlink of two or more MS520 units | | Inbuilt 20W into 4 Ohms 5 channel Amplifiers (1 Stereo – 3 Mono Option) | | Direct Inputs and Outputs on each zone | | Paging or Alarm Input Override System | | Full Digital Matrix control of functions to all 5 zones | | Up to 10 remote control panels RC 62 can be connected to each MS 520 |
| AMPLIFIER SPECIFICATIONS |
|---|
| Power output: | 5 x 20 | Watt rms | | Frequency Response (Music): | 30 ÷ 45 | Hz ÷ kHz | | Frequency Response (Direct): | 30 ÷ 45 | Hz ÷ kHz | | Frequency Response (Paging): | 200 ÷ 18 | Hz ÷ kHz | | Distortion: | 0.5 | % | | Signal / noise ratio (Music): | -78 | dB | | Signal / noise ratio (Direct): | -78 | dB | | Signal / noise ratio (Paging): | -60 | dB |
| INPUT SECTION |
|---|
| Input sensitivity (Music): | -16 | dBu | | Input sensitivity (Direct): | -16 | dBu | | Input sensitivity (Paging - Line): | - 43 ÷ -27 | dBu | | Input sensitivity (Paging - Mic): | - 58 ÷ -41 | dBu | | Bass Tone: | (100 kHz) ± 8 | dB | | Treble Tone: | (12.5 kHz) ± 8 | dB |
| OUTPUT SECTION |
|---|
| Out level: | -6 / -10 | dB | | Protections: | Short ciurcuit, thermal, AC / DC fuses | | | Power supply: | 16 | V dc |
| POWER REQUIREMENT |
|---|
| Operating voltage: | 220÷240 / 110÷120 V ~ 50 / 60 Hz | V ~ Hz | | Power (consumption): | 370 | W | | Max. Available power: | 100 | W |
| PHISICAL SPECIFICATION |
|---|
| Width: | 438 / 17.24 | mm/inch | | Height: | 44 / 1.73 | mm/inch | | Depth: | 253 / 9.96 | mm/inch | | Net Weight: | 3.66 / 8.06 | Kg/Lbs |
| SHIPPING INFORMATION |
|---|
| Package height: | 75 / 2.95 | mm/inch | | Package width: | 520 / 20.47 | mm/inch | | Package depth: | 280 / 11.02 | mm/inch | | Shipping Weight: | 4.18 / 9.21 | Kg/Lbs |
|
Product Features:
16-channel digital stereo mixer to create your personal monitor mix
Ultra-intuitive \"analog\" operation with total recall and 16 presets for custom mixes
State-of-the-art 24-bit D/A converters for premium audio quality
16 Channel Select buttons with dual LEDs for perfect overview
Level and Pan/Spread control per channel with LED meter
3-band EQ per channel with mid-band frequency control
Solo and Mute functions per channel
Global Level and EQ controls plus Panic Mute function
High power and \"drummer proof\" headphones output
Fully adjustable limiter protects your ears and headphones
Additional mono/stereo line output to connect your powered monitor
MIDI IN port for real-time remote control of all channels by external MIDI device such as BEHRINGER BCF2000, BCR2000, etc.
Standard CAT5e connection delivers power and 16 signals to each Personal Mixers
ULTRANET connector to daisy-chain up to forty-eight P16-M mixers for large systems (in conjunction with P16-D)
Ultra-low system latency of less than 1 millisecond
Powered via external power supply (included) or P16-I / P16-D
Mounts easily on a mic stand with the P16-MB mic stand mount (not included)
Extremely rugged construction ensures long life even under the most demanding conditions
Conceived and designed by BEHRINGER Germany
User\'s Manual |
Reviews
There are no reviews yet.