TOA WT-5800 UHF Wireless Tuner

408.63 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise. Specification (*1) 0 dB = 1 V Power Source AC mains (supplied AC adapter must be used) Power Consumption […]

 

Read more

The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.

Specification

(*1) 0 dB = 1 V

Power Source AC mains (supplied AC adapter must be used)
Power Consumption 250 mA (12 V DC)
Receiving Frequency 636 – 865 MHz(*2), UHF
Channel Selectable 64 selectable frequencies
Receiving System Double super-heterodyne
Diversity System Space diversity (true diversity)
Mixing Output MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack
Mixing Input -20 dB(*1), 10 kΩ, unbalanced, phone jack
Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75 Ω, BNC (Gain 0 dB)
Receiving Sensitivity 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation)
Squelch Sensitivity 18 – 40 dBμV variable
Squelch System Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency 32.768 kHz
Indicator Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm
Channel Check Usable frequencies scanning
S/N Ratio 110 dB or more (A-weight, unbalanced output)
Harmonic Distortion 1 % or less (typical)
Frequency Response 100 Hz – 15 kHz, ±3 dB
Operating Temperature -10 ℃ to +50 ℃
Finish Resin, black
Dimensions 210 (W) × 44 (H) × 205.1 (D) mm
Weight 700 g
Accessory AC adapter(*3) …1, Wireless antenna …2
Option Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units)

 

Weight 0.70 kg

Reviews

There are no reviews yet.

Be the first to review “TOA WT-5800 UHF Wireless Tuner”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA WT-5800 UHF Wireless Tuner removeTOA IR-702T Infrared Wireless Tuner removeTOA WT-5810 UHF Wireless Tuner removeSENNHEISER Receiver EM-2050-BW-X removeShure UR5 Portable Diversity Receiver removeTOA WTU-3800 UHF Wireless Tuner Unit remove
NameTOA WT-5800 UHF Wireless Tuner removeTOA IR-702T Infrared Wireless Tuner removeTOA WT-5810 UHF Wireless Tuner removeSENNHEISER Receiver EM-2050-BW-X removeShure UR5 Portable Diversity Receiver removeTOA WTU-3800 UHF Wireless Tuner Unit remove
Image
SKUWT-5800IR-702TWT-5810H99SE00264UR5WTU-3800
Rating
Price 408.63 incl. GR VAT 335.00 incl. GR VAT 329.00 incl. GR VAT 3,149.00 incl. GR VAT 1,009.00 incl. GR VAT 189.74 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Only 5 left in stock

In stock

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderOnly 5 left in stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.

Specification
(*1) 0 dB = 1 V
Power Source AC mains (supplied AC adapter must be used)
Power Consumption 250 mA (12 V DC)
Receiving Frequency 636 - 865 MHz(*2), UHF
Channel Selectable 64 selectable frequencies
Receiving System Double super-heterodyne
Diversity System Space diversity (true diversity)
Mixing Output MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack
Mixing Input -20 dB(*1), 10 kΩ, unbalanced, phone jack
Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75 Ω, BNC (Gain 0 dB)
Receiving Sensitivity 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation)
Squelch Sensitivity 18 - 40 dBμV variable
Squelch System Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency 32.768 kHz
Indicator Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm
Channel Check Usable frequencies scanning
S/N Ratio 110 dB or more (A-weight, unbalanced output)
Harmonic Distortion 1 % or less (typical)
Frequency Response 100 Hz - 15 kHz, ±3 dB
Operating Temperature -10 ℃ to +50 ℃
Finish Resin, black
Dimensions 210 (W) × 44 (H) × 205.1 (D) mm
Weight 700 g
Accessory AC adapter(*3) …1, Wireless antenna …2
Option Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units)

 

The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.

Specification
(*1) 0 dB = 1 V
Power Source AC mains, 50/60 Hz (supplied from the included AC adapter)
Power Consumption 15 W or less
Receiving Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Receiver Sensitivity S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation)
S/N Ratio 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted)
Tone Squelch Frequency 32.768 kHz
Infrared Receiver Input 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals)
Output Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output.
Frequency Response 100 Hz - 12 kHz
Operating Temperature -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Case: ABS resin, black
Dimensions 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“)
Weight 630 g (1.39 lb) (unit only)
Accessory AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4
Option Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together)

 

The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.

Specification
(*1) 0 dB = 1 V
Power Source AC mains (supplied AC adapter must be used)
Power Consumption 130 mA (12 V DC)
Receiving Frequency 636 - 865 MHz(*2), UHF
Channel Selectable 16 channels
Receiving System Double super-heterodyne
Diversity System Space diversity
Mixing Output MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack
Mixing Input -20 dB(*1), 10 kΩ, unbalanced, phone jack
Antenna Rod antenna
Receiving Sensitivity 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation)
Squelch Sensitivity 18 - 40 dBμV variable
Squelch System Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency 32.768 kHz
Indicator ANT A/B, Audio (peak), Battery alarm, Channel number
Channel Check Usable frequencies scanning
S/N Ratio 104 dB or more (A-weight, unbalanced output)
Harmonic Distortion 1% or less (typical)
Frequency Response 100 - 15,000 Hz, ±3 dB
Operating Temperature -10℃ to +50℃
Finish Resin, black
Dimensions 206 (W) × 40.6 (H) × 152.7 (D) mm (excluding antenna)
Weight 590 g
Accessory AC adapter(*3) …1

 

Equipped with the same features as EM 2000 but designed as a twin receiver,EM 2050 makes it possible for the RF signal to be looped through with the help of an integrated active splitter. With this design, you can set up systems with up to 16 channels without using external splitters. An integrated equalizer and guitar tuning device complete the package.

Type: Stable Transmitter

The UR5 is a premium portable wireless receiver component, designed to provide Shure UHF-R®-class technology, performance, and quality for professional broadcast and media production applications. Featuring wide-band frequency tuning, hands-on navigation, rechargeability, and a variety of mounting options, the UR5 is the clear choice for wireless portability.



RF Carrier Range
470–952 MHz (varies by region)

Modulation
FM, ±45 kHz maximum deviation

Antenna
Switching diversity

Dynamic Range    
>100 dBm=, A-weighted

RF Sensitivity
-106 dBm for 12 dB SINAD,
-88 dBm for 30 dB SINAD

Image Rejection
>100 dB (typical)

Spurious Rejection (ref. 12dB SINAD)
>80 dB (typical)

Squelch Threshold
30 dB SINAD (±3 dB) normal setting

Compatible Channels
Per band: 40 (band dependent)

Tuning Bandwidth
60–72 MHz (band dependent)

Frequency Stability
±2.5 ppm

Pilot Tone
UHF-R® Mode: 32 kHz tone key pilot
Axient Mode: 28 kHz tone key pilot

Audio Frequency Response
50 Hz-16 kHz

Ultimate Quieting
>100 dBm=, A-weighted

Total Harmonic Distortion (ref. ±20 kHz deviation @1 kHz)

Wireless receiver module 6 frequencies for WA-1812, 1812C. Combined with WM-3210, 3220 hand, WM-3310 lapel, WM-3310H head

Weight0.70 kg0.63 kg0.59 kg2.00 kg0.30 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.70 kg
Weight 0.63 kg
Weight 0.59 kg
Weight 2.00 kg
Weight 0.30 kg
Weight 1.00 kg