Content |
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
BS-33AT | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | Sensitivity: | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 810g (1.79 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
PRICE IS PER PIECE AND NOT PER PAIR!
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
| The BS-1034 and BS-1034S are wall-mount speakers matched with a supplied plug-in speaker bracket, for easy installation. The BS-1034/1034S combine a low-frequency 5" (12cm) cone-type speaker and a high-frequency balanced dome-type speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible. Enclosure and grille net colour is off-white, except on the BS-1034S, which comes with a silver net grille.
Speaker components: |
5" (12cm) cone-type + Balanced dome tweeter. |
Rated Input: |
100V Line 10W |
Impedance: |
100V LINE: 1kΩ (10W),2kΩ (5W) 3.3kΩ (3W),10kΩ (1W) |
Sensitivity: |
(1W 1m)9odB |
Frequency Responce: |
120-20,000Hz |
Input Terminal: |
Push-in terminal |
Finish: |
Cabinet: HIPS resin, off white, paintable.Grill: SECC, metallic paint.BS-1034S is finished silver metallic paint |
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
The BS-678B, is made of wood and can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678B have a built-in attenuator and can be connected to a 2-wire or 3-wire system.
Rated Input | 6 W (100 V line), 3 W (70 V line) | Rated Impedance | 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W) 0 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W) | Sensitivity | 94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise) | Frequency Response | 150 Hz - 20 kHz (peak -20 dB) | Speaker Component | 16 cm (6“) double cone-type | Applicable Cable | 600 V vinyl-insulated cable (IV wire or HIV wire olid wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)7-core twisted wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16) | Connection | Push-in connector (bridging terminal) | Attenuation | OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB) | Finish Baffle: | Baffle: HIPS, white (RAL 9010 or equivalent color)Cabinet: Particle board with pvc sheet, white (RAL 9010 or equivalent olor)Grille: Surface-treated steel plate net, black (RAL 9010 or quivalent color) | Dimensions | 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“(excluding volume control knob) | Weight | 1.7 kg (3.75 lb) | Accessory | Speaker mounting screw (4 × 35 (0.16" × 1.38“)) …2 |
|
The F-2000 Series Speaker are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application. The F-2000WTWP features a water-proof design (splash-proof type meeting IPX4 standard), so that it can be permanently installed outdoors.
Enclosure | Bass-reflex type | Rated Input | 60 W | Rated Impedance | 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W) | Sensitivity | 92 dB (1 W, 1 m) at installation in 1/2 free sound field
93 dB (1 W, 1 m) at installation in 1/2 free sound field (with horn adapter) | Frequency Response | 65 - 20,000 Hz, -10 dB at installation in 1/2 free sound field | Crossover Frequency | 2.5 kHz | Directivity Angle | Horizontal: 110゜, Vertical: 100゜ Horizontal: 80゜, Vertical: 80゜ (with horn adapter) | Speaker Component | Low frequency: 20 cm (8) cone-type High frequency: 25 mm (1“) dome tweeter“ | Input Terminal | Push-in terminal | Water Protection | IPX4 | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | Finish | Enclosure: HIPS, white
Punched net: Surface-treated steel plate, white, anticorrosive paint
Joint bracket, wall bracket: Stainless steel (SUS304), t2.0
Speaker bracket: Die-cast aluminum, white, paint | Dimensions | 244 (W) × 373 (H) × 235 (D) mm (9.61 × 14.69" × 9.25“)“ | Weight | 7.4 kg (16.31 lb) (including the supplied brackets) | Accessory | Speaker bracket …1, Joint bracket …1, Wall bracket …1, Bracket fixing screw … 1 set,
Horn adapter …1, Horn adapter mounting screw …4, Terminal cover …1,
Terminal cover mounting screw …4 | Option | Speaker mount bracket: SP-131, YS-60B |
|
Reviews
There are no reviews yet.