| Content |
Integrated with a resin panel and speaker frame, the PC-658R is the ceiling mount speaker with a metal attached. It features spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer.
| Rated Input | 6 W (100 V line), 3 W (70 V line) | | Rated Impedance | 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) | | Sensitivity | 90 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise) | | Frequency Response | 65 - 18,000 Hz (peak -20 dB) | | Speaker Component | 16 cm (6“) cone-type | | Dimensions for Fixing Hole | Mounting hole: φ170±5 mm (φ6.69“±0.2“)
Ceiling thickness: 5 - 25 mm (0.2" - 0.98“) | | Speaker Mounting Method | Spring clamp | | Finish | Baffle: Polypropylene resin, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color),
paint | | Dimensions | φ192 × 73 (D) mm (φ7.56" × 2.87“) | | Weight | 500 g (1.1 lb) | | Accessory | Paper pattern …1 |
|
ΑΒS Plastic. White
Mettalic Grid, White.
8” Dual Cone
Max Power: 20W
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | Bass reflex type | | Rated Input | 30W (high impedance) | | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | | Low | (Adjustable) 16Ω, 8Ω | | Sound Pressure Leve | 90dB (1W, 1m) | | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component: High frequency | 12cm cone-type | | Speaker Component: Low frequency | 12cm cone-type | | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | | Finish | Enclosure: Steel plate, plating
Baffle: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net: Steel plate, white, paint | | Dust-proof bag | n/a | | Dimensions | ø230 x 229 (D)mm | | Weight | 3.7kg (including mounting accessories) | | Accessories Panel | 1 | | Ceiling reinforcement ring | 1 | | Safety wire | 1 | | Paper pattern | 1 | | Option Anchor hanging bracket | HY- AH1 | | Back can | HY- BC1 | | Tile bar bridge | HY- TB1 | | Trim ring | HY- TR1 | | Electronic controller | AC- 120C | | Note | The F-122C must be used with an Electronic Controller AC-120. |
|
- Compact, high power handling.
- Completely sealed flush mounted high humidity area speaker.
- Plastic film diaphragm rated at 3W at 3.3k Ω and 1W at 10k Ω.
- Stainless steel punching net.
- ABS resin enclosure / Alloy coated ABS resin panel.
| Specification |
|
|---|
| Rated Input | 3W, 1W | | Rated Impedance | 3.3k Ω (3W), 10k Ω (1W) | | Sound Pressure Level | 88dB (1W, 1m) | | Frequency Response | 120 ~ 20,000Hz | | Ambient Temperature | -10 ~ +60°C | | Dimensions for Fixing Hol | ø150mm / Ceiling thickness; up to 50mm | | Dimensions | ø180 x 10 (exposed section) + 110mm | | Weight | 700g | | Finish | Frame and case; ABS resin, Off-white / Punching net; Stainless steel. |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | Bass reflex type | | Rated Input | 60W (high impedance) | | Power Handling Capacity | Continuous pink noise: 90W(8Ω), 60W (16Ω)
Continuous program: 180W(8Ω), 120W(16Ω) | | Impedance | (100V Line) 170Ω (60W), 330Ω (30W) 670Ω (15W), 3.3kΩ (3W) | | Impedance | (70V Line) 83Ω (60W),170Ω (30W) 330Ω (15W), 670Ω (7.5W) 3.3kΩ (1.5W) | | Impedance | (25V Line) 83Ω (7.5W),170Ω (3.7W) 330Ω (1.9W), 670Ω (0.9W) 3.3kΩ (0.2W) | | Low (Adjustable | 16Ω, 8Ω | | Sound Pressure Level | 91dB(1W, 1m) | | Frequency Response | 60 - 20,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component | High frequency: Dome- type | | Speaker Component | Low frequency: 16cm cone-type | | Mounting Hole | ø250(maximum ceiling thickness: 37mm) | | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | | Finish Enclosure | Steel plate, plating | | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | | Punched net | Steel plate, white, paint | | Dust-proof bag | n/a | | Dimensions | ø280 x 227 (D)mm | | Weight | 5.1kg (including mounting accessories) | | Accessories Panel | 1 | | Ceiling reinforcement ring | 1 | | Safety wire | 1 | | Paper pattern | 1 | | Option Anchor hanging bracket | HY- AH1 | | Back can | n/a | | Tile bar bridge | HY- TB1 | | Trim ring | n/a | | Electronic controller | n/a |
|
Integrated with a speaker unit and panel, the PC-2852 Ceiling Mount Speaker is of all metallic construction and ideal for use in a voice alarm system. It feature spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. The push-in type input terminal block makes cable connections easy and allows bridge wiring. |
Reviews
There are no reviews yet.