Content |
Designed for paging calls and general announcements, the PM-660D desk-top microphone comes with a large talk switch and a lock lever for easy and convenient operation. Its robust anti-vibration construction and balanced output render the microphone resistive to noise. In addition, the PM-660U microphone is equipped with a remote control switch (interlocked with the talk switch) for amplifier power on/off operation or chime activation.
Type | Moving coil microphone | Polar Pattern | Unidirectional | Rated Impedance | 600 Ω, Balanced | Rated Sensitivity | -58 dB (1 kHz, 0 dB=1 V/Pa) | Frequency Response | 100 - 10,000 Hz | Output | φ5.0 (φ0.2) | Talk Switch | 1-push-to-talk switch, 1-locking lever, Short-off type | Remote Control | 500 mA or less at 30 V DC | Finish | Microphone head: Zinc plated steel wire, gray baked paint
Main unit: ABS resin, gray | Dimensions | 100 (W) × 215 (H) × 150 (D) mm (3.94 × 8.46" × 5.91“)“ | Weight | 440 g (0.97 lb) (cord excluded) | ※ Do not keep the lock lever placed in the locked state (ON position) for a long period of time.Doing so may cause poor conductivity in the lever switch due to deterioration with age, resulting in unit malfunction.
| MASTER AUDIO – CM238
Pen-type microphone
- Directivity: condenser – ultra cardioid
- Frequency response.: 100Hz – 16Khz
- Sensitivity: -44db +/- 2db for short distance – -23db +/- 2db for long distance
- Output impedance: 1K Ohm for short distance – 2.3K Ohm for long distance
- Power supply: 1.5V / phanthom 48V
- Dimensions: Ø 23 x 360 mm.
- Windscreen, microphone holder and cable (4,5 m.) included
|
KSM44A Multi-Pattern Dual Diaphragm Microphone
Premium microphone with three polar pattern options (cardioid, omnidirectional, bidirectional).
Features - Prethos® Advanced Preamplifier Technology: Class A, discrete, transformerless preamplifier provides transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions.
- Groundbreaking specifications: 4dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
- Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
- Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior frequency response
- Premium electronic components and gold-plated internal and external connectors
- Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
- Integrated three-stage "pop” protection grille reduces plosives and other breath noise
Type | Condenser (externally biased) | Frequency Response | 20 to 20,000 Hz | Polar Pattern | Cardioid, Omnidirectional, Bidirectional | lmpedance | 50 ohms | Phantom power required? | 11–52 V DC phantom power (IEC-61938) 5.8 mA, maximum |
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
Polar Pattern |
Supercardioid |
Frequency Response |
50 Hz - 16 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms (290 Ohms Actual) |
Output Connectors |
XLR-3 Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
9.92 oz. (278 g) |
| Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence.
The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
- Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
Suggested Applications
Guitar Amp
Bass Amp
Acoustic Guitar
Brass/Saxophone
Snare Drums
Rack/Floor Toms
Congas
Woodwinds
Lead Vocals |
Unidirectional cardoid-pattern microphone with high sensitivity and extended frequency response. Factory-fitted for direct connection to the AM4000 series, PR4092, EL2126 CD sintoamplifier and 1000 series amplifiers.
General Specs
- Plastic body with 320 mm gooseneck
- Pushbutton for momentary microphone activation
- Connections on screw terminals inside
Specifications
- Type:Desktop paging microphone with dinamyc capsule
- Directivity:Unidirectional - Cardioid
- Frequency Response:100Hz ÷ 12 kHz
- Microphone Sensitivity:- 71 dB ± 3
- Output impedance:500Ω
- Signal/noise ratio:40dB
- Connector:3 pole XLR
Size/Weight
- Height:270 / 10.62mm/inch
- Width:200 / 7.87mm/inch
- Depth:132 / 5.20mm/inch
- Net Weight:6 / 3.53kg/lbs
|
Reviews
There are no reviews yet.